Advanced
Know what you're looking for?
Showing all 47 results
-
Advanced MXP-650 2.5A Boxed Power Supply
Advanced- 2.5A output
- Housing fits 2 x 17Ah batteries or 2 x 24Ah/38Ah batteries (deep version)
- A range of power supply equipment with power output options to suit most applications
- Universal AC input
-
Advanced MXP-651 5A Boxed Power Supply
Advanced- 5A output
- Housing fits 2 x 17Ah batteries or 2 x 24Ah/38Ah batteries (deep version)
- A range of power supply equipment with power output options to suit most applications
- Universal AC input
-
AdvancedLive
Advanced- Subscription to AdvancedLive dashboard
- Secure, remote access to real-time data
- Critical incident notifications
-
2-Way Programmable Relay Card For Advanced MxPro 5
Advanced- Each output individually programmable.
- Cost effective against ancillary hardware.
- Each output 30V AC/DC, 1 Amp rating.
-
Advanced Go & Go+ Single Loop Fire Alarm Control Panel
Advanced- Easy to install and use.
- Feature-rich and flexible.
- Fast and efficient.
- Ready now and for the future.
-
Advanced MxPro 5 – 1 Loop Panel
Advanced- Single loop control panel
- Supports Hochiki, Apollo, Argus Vega or Nittan protocols
- Choice of enclosures housing up to 45Ah batteries
- Fully networkable
-
Advanced MxPro 5 – 2 Loop Panel
Advanced- 1 - 2 Loop Panel
- Multiple Languages
- Global Compliance
- 3 Year Warranty
- Programmable Push Buttons
- Fully expandable
- Fully Networkable
- 20 Zonal / 25 System LED’s
- Slide-in labels
- Rack-mount options
-
Advanced MxPro 5 – 4 Loop Panel
Advanced- Dedicated 1 - 4 Loop
- Fully expandable
- Global Compliance 3 Year Warranty
- Programmable Push Buttons
- Multiple Languages
- Fully Networkable
- 20 Zonal / 25 System LEDs
- Slide-in Labels
- Rack-mount options
- Robust equipment chassis
- Fully programmable
-
Advanced MxPro 5 – 8 Loop Panel
Advanced- Dedicated 2 - 8 Loop.
- Global Compliance.
- 3 Year Warranty.
- Programmable Push Buttons.
- Multiple Languages.
- Fully Networkable.
- 20 Zonal / 25 System LEDs.
- Slide-in Labels.
-
Advanced 1.5A, 3A or 5A Boxed Power Supply With Battery Charging
Advanced- Approved EN54-4.
- Power and fault indication.
- 3 Year Warranty.
-
Advanced 12V 1.5A Boxed Power Supply With Battery Charging
Advanced- Suitable for use with a wide range of control equipment.
- 12V supply (1.5A only)
- High efficiency switched mode power supplies.
-
-
Advanced GOP-001 GO1 P-BUS Adaptor Card
Advanced- Used to connect local peripheral equipment to GO1 panels.
- PBUS modules must be configured using the PC Tool.
-
Advanced GOP-002 GO1 Access Enabled Key Switch Assembly
Advanced- Replacement access enabled key switch assembly for Advanced GO1 panels.
-
Advanced Loop Driver for MX-4400 or MX-4200 Panels
Advanced- Additional Loop Drivers for MX Pro Panels
-
Advanced Mx Pro Logo Programming Software
AdvancedEnter a brief description of your product here. This description will be displayed on product list pages.
-
Advanced MX Upload / Download Lead
AdvancedEnter a brief description of your product here. This description will be displayed on product list pages.
-
Advanced MXM-521 Semi-Flushing Bezel for MxPro5 Remote Terminal Display
Advanced- Semi-flushing bezel for MxPro 5 remote terminal displays.
- Supplied with fitting kit for a quick and easy solution.
-
Advanced MXP-532 General Routing Interface
Advanced- Two fire routing outputs.
- Outputs are monitored for open and short circuit wiring issues.
-
Advanced MXP-554 IP Gateway LAN Interface
Advanced- Provides remote access to devices on an Ad Net network..
- Configurable event email notification.
- Compatiable with both Mx-5000 & Mx-4000 series fire panels.
- Available as PCB only or boxed in enclopsure.
- Option of standard or fault-tolerant networks.
-
Advanced MxPro 4 – Remote Terminal (Repeater)
Advanced- Networked for System Display or Control.
- 24V DC Operating Voltage.
- 3 Year warranty.
- Graphical LCD Display.
- Ad-NeT/Ad-NeT+ Compatible.
- Small & Robust.
-
Advanced MxPro 5 – Remote Terminal (Repeater)
Advanced- Programmable switch input
- Graphical LCD Display
- Ad-NeT/Ad-NeT+ Compatible
- Slide-in Labels
- Small, Robust & compact
- 24V DC Operating voltage
- 3 Year Warranty
- Disable/enable options
-
Advanced MxPro 5 Access Enable Key Switch
Advanced- Enable/disable controls.
- Group isolate to disable I/O across network.
- For use to start/enable a class change.
-
Advanced MxPro 5 AlarmCalm Button with Buzzer
Advanced- Push button input
- LED output (for use as polling/activated function)
- Mechanically compatible with a single gang UK electrical back box
- Fully addressable device address, sits on loop (Apollo: 1-126, Axis EN:1-240)
- Fully programmable using AlarmCalm software, including verification and second-stage times
- Unique device type recognised as AlarmCalm unit by MxPro 5 FACPs
- Wiring terminations suitable for all Advanced recommended loop cables
- Optional programmable audible buzzer output
- Aimed at reducing unwanted alarms
-
Advanced MxPro 5 Document Enclosure
Advanced- Designed for IP30 protection.
- AC terminal block and leads.
- Internal labelling.
- Hinge pins.
-
Advanced MxPro 5 Key Switch
Advanced- Enable/disable controls.
- Group isolate to disable I/O across network.
- For use to start/enable a class change.
- Trapped and un-trapped key switches available.
- Control of multi-sensor/device sensitivity mode change.
- Simple to install and configure.
-
Advanced MxPro Standard Network Card
Advanced- True Peer to Peer
- Up to 1.5Km between Control Panels
- Windows based PC Set Up
- Network Analysis
-
Advanced MxPro4 2 Loop Addressable Fire Control Panel
Advanced- Apollo/Hochiki, Argus Vegan and Nittan Evolution Protocols
- Expandable 1-2 Loops
- Advanced Graphical LCD
- 4 Amp Power Supply
-
Advanced MxPro4 4 Loop Addressable Panel
Advanced- Fully Expandable to 4 Loops
- Fully Networkable
- Apollo, Hochiki, Argus & Nittan protocol
-
-
Advanced PC-NET-015 Mx Service Tool Software
Advanced- Retrieval of analogue values, panel meter readings and event logs from the Mx control panels.
-
Advanced Spare Access Enable Key (Singular)
AdvancedEnter a brief description of your product here. This description will be displayed on product list pages.
-
Advanced TouchControl Touch Screen Remote Terminal
Advanced- 2 Part Enclosure for easy fit
- 720P Resolution
- Full Alarm Mapping
- 500 Fire Event Log
- Standard or Fault Tolerant Network Compatible
-
Loop Driver Card For Advanced MxPro 5
Advanced- Loop card to expand the capacity of a MxPro 5 panel.
- Version available which supports the Apollo, Hochiki & Argus Vega protocols or the Nittan protocol.
-
Mirrored or Brushed Stainless Steel Finishes For Advanced MxPro5 Panels
Advanced- Clean and stylish.
- Aesthetically pleasing.
- High class look.
-
Mx Pro Configuration Software & Lead
Advanced- User Friendly.
- Windows Programming.
- XP & Vista Compatible.
- Remote Diagnostics.
- Product Branding Tool.
- Virtual Control Mode.
- Virtual Diagnostic.
- Mode Cost Effective.
-
Mx-4100 Advanced MxPro4 – 1 Loop Addressable Panel
Advanced- Cost effective non-networkable option available (Mx-4100S)
- Single loop control panel
- EN54 Parts 2 & 4 approved
- Apollo/Hochiki protocol
- 3 Year warranty
-
Network Card For Advanced MxPro 5
Advanced- Network card for Advanced MxPro 5 panels.
- Large Ad-NeT+ 200 Panel Network.
- Up to 1.5Km between Control Panels.
- Standard or Fault-Tolerant versions available.
-
PENN Peripheral Expanson Network Node For Advanced MxPro 5
Advanced- Lets you install peripherals in remote locations without an additional panel.
- Network in-built – either Standard or Fault Tolerant.
- Up to 32 Nodes in Standard configuration and Up to 200 Nodes in FT configuration.
-
Printer Assembly For Advanced MxPro 5
Advanced- Fast instant response.
- Fast and silent operation.
- Thermal printer.
-
QuickZone 2 or 4 Zone Conventional or Sav-Wire Panel
Advanced- 2 or 4 zones.
- DIL selectable conventional or twin-wire (savwire) set up.
- Class change and alert inputs.
- Fire and fault relays.
- 2 monitored sounder circuits.
- 1 Amp switch mode PSU.
- Space for up to 3.2Ah batteries.
- False Alarm management.
- Approved to EN54 2 & 4.
- 3 year warranty.
-
Remote Battery Temperature Sensor For Advanced MxPro 5
Advanced- Simple to install.
- External battery monitoring.
- For use with all Axis EN series control panels.
-
Routing Termination Card For Advanced MxPro 5
Advanced- Routing Termination Card For Advanced MxPro 5 panels.
-
Semi-Flushing Bezel For Advanced MxPro 5 Panels
Advanced- Semi flush fitting for all MxPro 5 panels.
- Picture frame effect for ease of installation 30mm flange for control panels, 20mm for repeaters.
-
Sounder Active EOL For Advanced MxPro 5
Advanced- For use with EN54-13 Compliance.
- Supports device removal.
- For use with all MxPro 5 series control panels.
-
-
Zonal LED Indication Cards for Advanced MxPro5 Panels
Advanced- Programmable LEDs.
- Supports dynamic zoning.
- Fully programmable.
- Cost effective against ancillary hardware.