Shopping Basket

0 Items

Subtotal £0.00

System Sensor Addressable Waterproof Call Point with Isolator

£188.13 (inc VAT: £225.76)

Low Stock

SKU: W5A-RP02SG-K013-01 Category: Brand:


Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new WCP outdoor call point range.

The outdoor WCP is an IP67 sealed manual call point product. The enhanced environmental protection allows the unit to be installed in many external environments where water and dirt are likely to be present, making it a true waterproof and outdoor product.

Installation time and ultimately cost, are of paramount importance to any fire or security installer. The WCP range directly reflects this need by providing a unique ‘plug and play’ concept designed specifically to reduce installation time. All new WCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the WCP. Simple, but effective with no re-termination required and no time wasted. In addition, all WCP products are supplied with three standard 20mm threaded cable entries, accommodating all types of surface wiring installations.

Through new standards and legislation, both break glass and re-settable operating elements can now be used within a manual call point. To provide you with the greatest ‘flex-ability’, the new WCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.

All WCP outdoor call point products also help preserve the integrity of the overall system, as illegal removal of the product lid will result in the call point operating and the system going into alarm.

Full compliance with the latest standards is essential and the new WCP indoor call point range is fully approved to the latest EN54-11 standard. (Compliant markings only).

The WCP5A product has the Advanced Protocol embedded which is fully backwards compatible with older System Sensor protocols. A version of this call point with built in isolation is also available.


  • Sealed to IP67
  • Integral short circuit isolator
  • Unique ‘Plug & Play’ installation concept
  • Total ‘Flex-Ability’ in the choice of operating element
  • Anti-Tamper facility
  • Enhanced aesthetics and compact design
  • Fully approved to the latest standards
  • CPD Approval


Electrical Specification

  • Cable Termination : 0.5-2.5mm²
  • Maximum Voltage : 30VDC
  • Standby Current : 500µA
  • Operating Current : 7.6mA

Environmental Specification

  • Humidity : 0-93±3% non-condensing
  • Operating Temperature : -25°C to +70°C
  • Storage Temperature : -25°C to +70°C
  • Ingress Protection (IP) Rating : IP67

Mechanical Specification

  • Material : PC/ABS
  • Weight : 350g
  • Colour : Red, Ral 3001


Additional information

Weight 0.35 kg

Hazardous Applications

Marine Applications

Short Circuit Isolator

System Type