Apollo
Know what you're looking for?
Showing 151–162 of 162 results
-
Orbis Marine Relay Base
ApolloThe Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state
-
Orbis Marine TimeSaver Base
ApolloThe Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.
-
Orbis Multisensor Detector
Apollo- Orbis conventional multisensor smoke detector.
- TimeSaver Base designed for fast installation.
- StartUp for fast commissioning.
- FasTest reduces maintenance time.
- Automatic drift compensation, with DirtAlert warning to easily identify dirty detectors.
-
Orbis TimeSaver Base with Continuity Switch
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Product Depth - 20mm
- Product Diameter - 100mm
-
Series 65 Conventional Duct Smoke Detector
Apollo- For use with Series 65 or Orbis detectors
- Operates in air speeds of 0.5m/s to 20m/s
- Transparent cover to view detector head LED
- Integral smoke test port
- Volt-free contacts
-
Sonos Open Area Beacon with Isolator
Apollo- For use with XP95 & Discovery systems
- Self-test fault monitoring
- IP65 rated
- Individual and group addressing
- Sycronisation of flashes
- Comes with Isolating Base as standard
- Loop-powered
- Red and clear lens options
-
Soteria SA5000-400 Heat Detector
Apollo- Soteria heat detectors with heat clasifications A1R, A2R, A2S, BR, BS, CR or CS.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
Soteria SA5000-600 Optical Smoke Detector
Apollo- Enhanced reliability of smoke detection.
- Reduction in false alarms.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
XP95 Category W EN 54-23 Visual Alarm Device with Red or White Body
Apollo- Uses high intensity LED (white flash only).
- EN 54-23 Compliant Category W. VAD.
- Coverage W-2.4-6.
- Automatic LED check when VAD activated.
-
XP95 I.S. Manual Call Point
ApolloKey Features
- Plug and Play’ terminal connections for fast wiring
- Continuity link for wiring test before commissioning
- Reports an alarm in under 0.2 seconds
- Resettable element
-
XP95 I.S. Optical Smoke Detector
ApolloKey Features
- Responds well to slow-burning, smouldering fires
- Well suited for bedrooms and escape routes
- Unaffected by wind or atmospheric pressure
-
XPERT 8 SA5000-200 Intelligent Mounting Base
Apollo- Compatibility with Soteria, Discovery and XP95 detectors.
- Isolated and Non-isolated devices supported.
- Isolated wiper - maintains loop connectivity during temporary removal of devices.
- Supplied with XPERT 8 Card for CoreProtocol®.
- ‘E-Z Fit’ allows for simple mounting of the detector base after wiring.
- Base mark allows for LED detector alignment.