Ajax Transmitter Jeweller
Summary
The Ajax Transmitter Jeweller is a sophisticated device designed to seamlessly integrate third-party wired detectors or devices into an Ajax security system.
Features
- It enables the connection of third-party devices with Normally Closed (NC) or Normally Open (NO) contact types to the Ajax security system
- Provides a 3.3 V power supply to the connected wired device, ensuring its operational efficiency
- Facilitates quick and easy pairing with the security system through scanning a QR code, simplifying the setup process
Specifications
Technical Specifications
- Compliance with standards :
- EN 50131 (Grade 2)
- Compatibility :
- Control panels
- all Ajax hubs
- Control panels
- Range extenders:
- all Ajax radio signal range extenders
- Inputs and outputs:
- Alarm type
- 1 pair of terminals
- Tamper input
- 1 pair of terminals
- Power supply output for the wired device
-
1 pair of terminals
Supply voltage 3.3 Vâ
-
- Integration module power supply
- 3 × CR123A battery (Pre-installed)
- Alarm type
- Communication channels :
- Jeweller communication technology
- Frequency bands :
- 866.0 – 866.5 MHz
- 868.0 – 868.6 MHz
- 868.7 – 869.2 MH
- 905.0 – 926.5 MHz
- 915.85 – 926.5 MHz
- 921.0 – 922.0 MHz
- Depends on the sales region
- Maximum effective radiated power (ERP) : ≤ 20 mW
- Radio signal range up to 1,600 m
- Between the hub or range extender and the integration module
- Protection against spoofing
- Device authentication
- Wired device connection:
- Cable length:
- Cable length
- 24AWG twisted pair
- Compatibility:
- any detector or device with a NC/NO contact type
- Device types
- pulse and bistable
- Adjusted by the PRO or user with admin rights
- Event types
- Tamper alarm intrusion fire auxiliary alarm panic button gas alarm malfunction leakage glass break
- high temperature, low temperature masking duress code (opening) vibration (seismic sensor) custom
- Adjusted by the PRO or user with admin rights
- Cable length:
- Installation :
- Operating temperature range from from 10°Ð¡ to +40°Ð¡
- Installation method
- inside the detector enclosure or in a sealed
- Operating humidity up to 75%
- Board:
- Colour :
- N/A
- Dimensions :
- 100 × 39 × 22 mm
- Weight :
- 74 g
- Protection against dismounting
- Built-in accelerometer and tamper alarm
- Colour :
- Complete set
- Transmitter Jeweller
- 3 × CR123A battery
- Pre-installed
- Double-sided tape
- Quick start guide
Downloads
- Datasheet (Adobe PDF)