DPL Wireless Pager Signal Booster Unit
£393.34 (inc VAT: £472.01)
Summary
The best Pocsag Paging Booster on the market today. Collects calls locally & then boosts the calls direct to any Pocsag Pocket Pager which supports pocsag protocol. Full technical backup by our professionally trained staff.
Programming
Fully programmable using a standard PC. (Requires programming lead). Programming software free of charge.
- Supplied with stub aerial, plug in power adaptor & full operating instructions.
- Not up to programming the paging transmitter ? Well let us program it for you.
- Programming of transmitter is totally free of charge.
- We can even supply the pocket pagers to go with your transmitter.
- Works with all Pocsag Pocket Pagers.
Frequency & Baud Rate
Choose your preferred transmit frequency as they are all selectable, even the transmit & communication port baud rate can be selected in programming.
Serial 9 Way D Connector
This connection allows you to program the product.
Powering The Transmitter
Two options are available to power the transmitter. Maximum power consumption 300 ma.
- Transmitter supplied with Mains power adaptor, which plugs in to base of product.
- Transmitter can be powered from a 7.5 – 30 volt DC source.
Key Features
- Can be powered from existing DC powered equipment on site or from mains supply.
- Supplied with aerial, plug in power adaptor & full instructions.
- Frequency selectable.
- Pager Transmit baud rates selectable.
- 9 way D serial Communications port for programming.
- Transmit range of up to 1 mile with 1/4 wave aerial. Larger area coverage possible 5 – 8 miles.
- LED indicator to show transmit status.
- Low consumption switch mode power supply.
- Free PC programming software.
- Power the transmitter with standard alarm, telephone or cat5e cable over long cable runs without any power loss or performance.
Specifications
- Transmit Frequency : 454 – 462 MHz ( Selectable frequencies)
- Transmit Baud Rate : 512 – 1200 (Selectable)
- Band : UHF
- Modulation Type : FSK
- Transmitter Power : 10 or 100 or 500mw (Requested when ordering)
- Aerial Connector : BNC
- Radio Standards : EN 300 220-3
- EMC Standards : ETSI – EN 301 489-3
- Transmission Format : Pocsag
- Programming Com Port : Female 9 way D connector. 1200, 2400 or 9600 Baud rate. (Selectable)
- Power Supply : Built in Switch mode power supply
- Power Supply Input : 7.5 – 30 volt DC. (Internal connector block)
- External Power Connector : 7.5 – 30 volt DC (2.5 jack centre +V) (Power adaptor supplied)
- Average Consumption : Standby 50ma – Transmit 50 – 300ma depending on transmit power
- Case Size : W 125mm, L180mm, H 35mm
- RoHS Compliant : Yes
- CE Compliant : Yes
- Warranty Period : 18 months
Downloads
- Datasheet (Adobe PDF)
- Quick Install Guide (Adobe PDF)
Additional information
| Weight | 2 kg |
|---|---|
| Device Type | |
| System Type |