Dycon 12 or 24V Universal Relay Output Module

Summary

Dycon’s universal relay output module range consists of two models, DFR-1-12, a 12VDC unit and DFR-1-24, a 24VDC version. A DFR-X relay board switches the output power if the input is closed or opened. Like a fire relay, the input can be triggered from a switch, using the internal power or by applying 12 or 24 Volts DC depending on version and have the ability to control up to 5 Ampere loads. The relay is switched through an opto-coupled input that provides full isolation and uses very low power to switch the relay. Normally-open and normal-closed contacts enable operation in power-fail mode. The unit has 2 outputs, one switched and one pass through, both of which are individually fused. The integral jumper enables the relay to be set to volt free operation. 4 LED’s provide easy feedback of the status of the inputs and outputs. The DFR-X units have the same footprint and fixing positions as the Dycon DFX4-0P 4-way output splitters and can easily be fitted into a wide range of Dycon housings.