HikVision 16 Port Fast Ethernet Smart POE Switch

Specifications

General

• Shell : Metal material
• Net Weight : 2.59 kg (5.71 lb)
• Gross Weight : 3.68 kg (8.11 lb)
• Dimensions (W × H × D) : 440.00 mm × 44.00 mm × 220.80 mm (17.32” × 1.73” × 8.69”)
• Operating Temperature : 0 °C to 45 °C (0 °F to 113 °F)
• Storage Temperature : -40 °C to 85 °C (-40 °F to 185 °F)
• Operating Humidity : 5% to 95% (no condensation)
• Relative Humidity : 5% to 95% (no condensation)
• Power Supply :100-240 VAC, 50/60 Hz, Max. 2.5 A
• Installation : Mode Rack (equipped with mounting ears)
• Max. Power Consumption : 250 W
• Power Consumption In Idle : 10 W
• Surge Protection : 6 KV

Network Parameters

• Ports : 16 × 10/100 Mbps PoE port,2 × Gigabit combo
• MAC Address Table:16 K
• Switching Capacity : 9.2 Gbps
• Packet Forwarding Rate : 6.84 Mpps
• Internal Cache : 4 Mbits

PoE Power Supply

• PoE Standard : IEEE 802.3af,IEEE 802.3at 
• PoE Power Pin : 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
• PoE Port|: PoE: Ports 1 to 16
• Max. Port Power : 30 W
• PoE Power Budget : 230 W

Software Function

• Long Range :
  • Ports 1 to 16: up to 300 m.
  • Long range performance may vary depend on camera model or cable condition.
• VIP Port : Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
• Port Isolation : /
• PoE Watchdog : /
• Link Aggregation :
  • Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
  • Support static link aggregation.
  • Support 1 aggregation groups.
• QoS : >/
• Loop Prevention : /
• VLAN : /
• HPP :
  • Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
  • 1. Display the port rate.
  • 2. Display the port bandwidth utilization rate.
  • 3. Display the PoE power usage.
  • 4. Display topology information.
  • 5. Display the alarm status.
  • 6. Restart ports and devices.
  • 7. Enable port long-rage mode.
  • 8. Remotely upgrade the device.
• System Maintenance :
  • Support device management via web.
  • Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
  • Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
  • Support management via Hik-Central Pro.
  • Support remote management via Hik-Partner Pro.
  • Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
  • Supports 802.1ab LLDP for peer device discovery.
  • Support SNMP v1/v2c for third-party management platform access.
  • Support port mirroring for fault locating.
• Port Rate-Limiting : /
• Storm Control : /
• IGMP Snooping : /
• DHCP Snooping : /
• ACL : /
• IPSG : /

Approval

• EMC : FCC (47 CFR Part 15, Subpart B),CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
• Safety : UL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
• Chemistry : CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)