HikVision 8 Port Fast Ethernet Smart POE Switch
Summary
The HikVision 8 Port Fast Ethernet Smart POE Switch, available at Discount Fire Supplies, is a reliable networking solution with advanced features such as long-range transmission and surge protection.
Features
- 8 × 100 Mbps PoE RJ45 ports and 1 × gigabit network RJ45 port
- IEEE 802.3at/af standard for PoE ports
- Up to 300 m long-range transmission for AF/AT cameras
Specifications
General
- Shell : Metal material, fan-free design
- Net Weight : 0.35 kg (0.77 lb)
- Gross Weight : 1.114 kg (2.45 lb)
- Dimensions (W × H × D) : 170.00 mm × 27.60 mm × 93.10 mm (6.69” × 1.09” × 3.67”)
- Operating Temperature : 0 °C to 40 °C (32 °F to 104 °F)
- Storage Temperature : -40 °C to 85 °C (-40 °F to 185 °F)
- Operating Humidity : 5% to 95% (no condensation)
- Relative Humidity : 5% to 95% (no condensation)
- Power Supply : 48 VDC, 2.5 A
- Installation Mode : Desk-Mounted,Wall-Mounted
- Max. Power Consumption : 120 W
- Power Consumption In Idle :10 W
- Surge Protection : 6 KV
Network Parameters
- Ports : 8 × 10/100 Mbps PoE port,1 × 1 Gigabit RJ45 port
- MAC Address Table : 16 K
- Packet Forwarding Rate : 4.17 Mpps
- Internal Cache : 4 Mbits
- Switching Capacity : 5.6 Gbps
PoE Power Supply
- PoE Standard : IEEE 802.3af,IEEE 802.3at
- PoE Power Pin : 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
- PoE Port : PoE: Ports 1 to 8
- Max. Port Power : 30 W
- PoE Power Budget : 110 W
Software Function
- Long Range :
- Ports 1 to 8: up to 300 m.
- Long range performance may vary depend on camera model or cable condition.
- VIP Port : /
- Port Isolation : /
- PoE Watchdog : /
- Link Aggregation : /
- QoS : /
- Loop Prevention : /
- VLAN : /
- HPP :
- Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
- 1. Display the port rate.
- 2. Display the port bandwidth utilization rate.
- 3. Display the PoE power usage.
- 4. Display topology information.
- 5. Display the alarm status.
- 6. Restart ports and devices.
- 7. Enable port long-rage mode.
- 8. Remotely upgrade the device.
- Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
- System Maintenance :
- Support device management via web.
- Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
- Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
- Support management via Hik-Central Pro.
- Support remote management via Hik-Partner Pro.
- Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
- Supports 802.1ab LLDP for peer device discovery.
- Support SNMP v1/v2c for third-party management platform access.
- Support port mirroring for fault locating.
- Port Rate-Limiting : /
- Storm Control : /
- IGMP Snooping : /
- DHCP Snooping : /
- ACL : /
- IPSG : /
Approval
- EMC : FCC (47 CFR Part 15, Subpart B),CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
- Safety : UL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
- Chemistry : CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
Downloads
- Datasheet (Adobe PDF)
Additional information
Weight | 1 kg |
---|---|
Type |