Kentec Sigma CP-R Conventional 2-8 Zone Repeater Panel
£139.32 – £258.23
Summary
The Sigma CP-R Repeater is compatible with all Sigma CP control panels which have operating software version V2.0 or above.
Repeaters are available with 2, 4 or 8 zones and in mains powered (K versions) or 24V powered (E versions).
Mains powered repeaters require only a two core data cable from the main control panel. 24V DC versions require an additional two cores for power either from the main panel or from another 24V DC source.
A mixture of Repeaters or Ancillary boards up to a maximum of 7 of each type can be connected to a control panel and each is allocated an address from 1 to 7 using a binary coded DIL switch. The total length of the data cable from the main panel to the last repeater must not exceed 1200 metres.
Key Features
- Two wire serial connection
- Up to 7 panels per system
- 230V AC or 24V DC powered versions
- Full control over main panel
- Volt free fire and fault contact outputs
Specifications
- Construction : 1.2mm Mild Steel
- IP Rating : IP30
- Finish : Epoxy Powder Coated
- Weight : 6KG
- Max Battery Size : 7Ah 12V
- Cable Capacity : 2.5mm Per Terminal
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 6 kg |
|---|---|
| Zones | 2 Zone, 4 Zone, 8 Zone |
| Voltage | 24V, 240V |