Morley ZXSe Analogue Addressable Panel

Specifications

Software Features

The initial installation of the system is aided by sophisticated features like AUTOLEARN. An internal routine that will automatically detect all the devices on the detection and peripheral loops saving valuable commissioning time. An off-line Windows™ configuration tool is included to further enhance the process, making text entry and specific, complex device programming easier. Complex cause and effect programming is simplified through a clearly designed user interface. Once completed the configuration of the panel can be saved for future reference. Enhanced features allow the complete archiving of the control panel history log.

• Event logic – facilitates complex cross-panel programming
• Auto-learn facility allows rapid and accurate commissioning of devices
• Windows™ configuration tool allows off-site programming
• Facility to print history and event logs

Hardware Features

• Zones: 200 (max)
• LED Type Zonal Indicators FIRE/FAULT/TEXT/DISABLED:
• ZX1Se: 20
• ZX2Se: 20
• ZX5Se: 20 (up to 200 availible on special request)
• Internal sounder: Yes
• User Controls: Sound Alarms, Silence/Resound, Mute Buzzer, Accept, System Reset
• Programming Controls: Alphanumeric multi-level keypad
• LED Type General Panel Status Indicators: FIRE, FAULT, Acknowledged, Disablement, Test, Sounder Fault,Delayed Mode, Relays Disabled, Earth Fault, System/CPU Fault,Sounders Disabled, Alarms Silenced, Supply Fault, Power
• Serial Interface:
• ZX1Se: 2 serial ports with connections for optional RS485 or RS232 plug-in communication cards
• ZX2Se: 2 serial ports with connections for optional RS485 or RS232 plug-in communication cards
• ZX5Se: 3 serial ports with connections for optional RS485 or RS232 plug-in communication cards
• Auxiliary Relays:
• ZX1Se: 1 fault and 1 fire relay voltage free, changeover outputs contacts rated at 24V AC/DC, 1A, 0.6 PF maximum
• ZX2Se: 1 fault and 1 fire relay voltage free, changeover outputs contacts rated at 24V AC/DC, 1A, 0.6 PF maximum
• ZX5Se: EN54 format at 1 fault relay and 1 programmable relay voltage free, changeover outputs contacts rated at 24V AC/DC, 1A, 0.6 pF maximum
• Sounder Outputs:
• ZX1Se:2 programmable outputs. Open and short circuit monitoring. 1A maximum per output (Maximum total load 1.3A)
• ZX2Se:2 programmable outputs. Open and short circuit monitoring. 1A maximum per output (Maximum total load 1.3A)
• ZX5Se: 4 Programmable outputs. Open and short circuit monitoring. 1A maximum per output (Maximum total load 1.3A)

Mechanical

• Dimensions (mm):
• ZX1Se: 400 x 400 x 135 (H x W x D)
• ZX2Se: 400 x 400 x 135 (H x W x D)
• ZX5Se: 500 x 500 x 195 (H x W x D)
• Weight (without batteries):
• ZX1Se: 10kg
• ZX2Se: 10kg
• ZX5Se: 20kg
• Colour: RAL 9002 – Grey White
• Environmental Operating Limits – Temperature/ Humidity: 0°to + 40°C/ 85% non-condensing (max)
• Construction: Sheet steel painted, sealed to IP30
• Cable Entry:
• ZX1Se: 14 x 20mm knock-outs in top of cabinet / 2 x 20mm knock-outs in bottom of cabinet
• ZX2Se: 14 x 20mm knock-outs in top of cabinet / 2 x 20mm knock-outs in bottom of cabinet
• ZX5Se: 24 x 20mm knock-outs top/ 24 x 20mm knock-outs bottom

Electrical

• Operating Voltage: 230V AC 50Hz (+10%,-15%)
• Maximum PSU Rating:
• ZX1Se: 4.2A total, comprised of 2.5A min @ 25V (panel and loop supply) 1.75A min charger current
• ZX2Se: 4.2A total, comprised of 2.5A min @ 25V (panel and loop supply) 1.75A min charger current
• ZX5Se: 8.6A total, comprised of 2.25A min @ 25V (panel supply) 2.5A min @ 35V (loop supply) 1.66A min @ 12V (printer supply) 2.2A min charger current
• Loop Load:
• ZX1Se: 460mA maximum
• ZX2Se: 460mA per loop maximum
• ZX5Se: 460mA per loop maximum
• Stand-by Batteries:
• ZX1Se: Minimum Capacity – 2 x 12V 7Ah / Maximum Capacity – 2 x 12V 12Ah
• ZX2Se: Minimum Capacity – 2 x 12V 7Ah / Maximum Capacity – 2 x 12V 12Ah
• ZX5Se: Minimum Capacity – 2 x 12V 12Ah / Maximum Capacity – 2 x 24V 12Ah
• Panel Designed to Meet EN54-4 Charging Requirements For Larger Batteries if Required: ZX1Se: up to max 38Ah

Networking Features

The Morley-IAS network is a unique, robust protocol that can be used over long distances, and utilise many different types of fire resistant cabling. All versions of the ZXSe range can be connected together creating a network of up to 99 control panels. The flexible network can be configured in two ways:

• Shared Zone System – Each networked control panel shares information
• Report & Control System – For multiple building sites where information is presented at the local and master panels only
• A compliant fault tolerant network can be created using the additional, optional Hi-485 network card
• 99 panel network allows systems in excess of 60,000 devices to be managed

Protocol Devices

Each panel is capable of supporting Apollo (Xplorer, XP95 & Discovery), Hochiki ESP, Nittan, Morley-IAS and System Sensor protocol devices

• ZX1Se Loop Capacity: 1 loop 460mA maximum
• ZX2Se Loop Capacity: 1 or 2 loops 460mA per loop maximum
• ZX5Se Loop Capacity: 1 to 5 loops 460mA per loop maximum

User Interface

A quick glance enables users to assess the condition of the fire alarm system. Alarm and Fault conditions are highlighted by LEDs and supported by enhanced text descriptions on the LCD display. Clearly labelled buttons allow users to quickly manipulate the system providing both audible and tactile feedback of successful operations. The panel has 3 access levels. Level 1 is unprotected and allows basic user functions. Level 2 is passcode protected and allows more advanced user functions. Level 3 is protected by a different passcode and allows programming functions.

• 4×40 – Character LCD alphanumeric display with back-light
• Up to 200 zone LEDs (by special request)
• Up to 10 individual level 2 user access codes
• Optional lockable glass door – provides added security/protection