Shopping Basket

0 Items

Subtotal £0.00

Sigma CP Sounder Controller Unit


SKU: 09b3b3f2c70a Category: Brand:


The Sigma CP Sounder Board is compatible with all Sigma CP control panels which have operating software version V3.0 or above.

The board provides 8 additional sounder outputs which can be configured as zoned, 2-stage or common alarm. All sounder outputs are open and short circuit monitored and any faults on the sounder outputs will be announced at the main fire alarm panel as a sounder fault.

A class change input is provided which, when activated by a volt free contact closing, will switch all sounder outputs on.

Up to 7 Sounder boards can be connected to a control panel and each is allocated an address from 1 to 7 using a binary coded DIL switch. Sounder boards may be connected to the Sigma CP serial bus in addition to Sigma CP ancillary boards and Sigma CP-R repeater panels.

The total length of the data cable from the main panel to the last repeater must not exceed 1200 metres.


  • Two wire serial connection
  • 230V AC or 24V DC powered versions
  • All outputs monitored for open and short circuit faults
  • Fully monitored by main control panel
  • Up to 8 outputs with 1A available from each
  • Boxed units in enclosure to match Sigma CP control panels
  • Up to 7 sounder boards per system
  • Zoned, 2-stage or common alarm
  • Individual open and short circuit fault indicators
  • Class change input facility
  • Can be connected to serial bus with Ancillary boards and repeaters
  • Power fault input for monitoring remote power supplies


  • Construction (Boxed): 1.2mm mild steel
  • IP Rating (Boxed): IP30
  • Finish: Epoxy powder coated
  • Colour – lid & box: BS 00 A 05 grey – fine texture
  • Supply Voltage (K04400M2): 230V AC (+10%/-15%)
  • Supply Voltage (K04000M2): 20-30V DC
  • Mains supply fuse: 1.6A 250V
  • Power supply DC rating: 24V 5.25 Amp
  • Sounder output rating: 1A per output
  • Class change input: Volt free NOC
  • Cable capacity: 2.5mm² per terminal
  • Operating temperature: -5°C to +50°C
  • Operating humidity: <95% (non condensing)


Additional information

Weight 2 kg

PCB Only, Boxed PCB Only, Boxed With PSU