Shopping Basket

0 Items

Subtotal £0.00

SmartConnect Multi-Loop Repeater

£510.42 (inc VAT: £612.50)

Low Stock

SKU: SMART/REP Category: Brand:


The Smart Multi-loop Repeater can be used to monitor, operate and program Smart Multi-loop control panels (FACPs) from anywhere within the networked system.

The repeater features a 4.3” colour touch screen display that provides easy-to understand system messages. The repeater is ergonomically designed with an LED, button and menu setup that perfectly replicates a Smart Multi-loop control panel. This will make the repeater feel familiar to use for those who are trained/experienced in using the Smart M ulti-loop system.

It can operate as part of a networked system of up to 64 panels’ peer-to-peer, with powerful programming options that allow configurable control over whether messages from specific panels are transmitted around the network or remain local.

The Smart Multi-loop Repeater is supplied with a black finish to match virtually any décor. The repeater enclosure can be surface or flush mounted.


  • 4.3” colour touch screen display
  • 8032 event log entries
  • Up to 64 panel peer-to-peer network
  • 13 status LED indicators
  • 5 function button controls
  • Fully functioning repeater provides the ability to program a networked Smart Multi-loop control panel from the front screen
  • Accommodates wiring lengths up to 1000 metres from the control panel for added design and install flexibility
  • Network can we wired in either a bus or a ring topology if a redundant path is required
  • 8 password protected access accounts available (1 admin level, 7 user level)
  • Uncluttered and intuitive interface allows alarms, tech alarms, and fault events to be easily viewed
  • Low power consumption
  • Small enclosure


  • Operational Voltage: 28VDC
  • Quiescent Current: 78mA
  • Maximum Current: 100mA
  • Communication Protocol: RS485
  • Maximum Network Size: 64 Nodes
  • Maximum Distance Between Nodes: 1KM (using a screened data cable) / 100m (suing a standard fireproof cable)
  • Network Wiring Typologies: Bus / Ring (recommended)
  • LC Screen: 4.3” Resistive touch screen. 480 x 272 pixel resolution
  • LED Indicators: 2 Red (1 x Fire, 1 x Sounder Active), 1 Green (Power), 10 Yellow (1 x Relay Delay, 1 x Fault, 1 x Sounder Delay, 1 x Controls Active, 1 x General Disablement, 1 x General Test, 1 x Sounder Fault/Disablement, 1 x Sounder Delay 1 x System Fault, 1 x More Data).
  • Function Button Controls: Stop Sounders, Silence Buzzer, Scroll Display, Reset, Start Sounders
  • Dimensions H x W x D (mm): 230mm x 340mm x 96mm
  • Weight: 2.3KG
  • Cable Entries: 5
  • Terminal Wiring Size: 28-12 AWG
  • Material: Zintec
  • Colour: RAL9005
  • Operating Temperature: -5°C (23°F) to 40°C (104°F)
  • Relative Humidity: 93% Non-condensing


Additional information

Weight 2.3 kg