Shopping Basket

0 Items

Subtotal £0.00

SmartConnect Multi-Loop RS485 Network Module

£274.17 (inc VAT: £329.00)

Low Stock

SKU: SCM-NM Category: Brand:


The Smart Connect Multiloop system network has the facility to monitor, indicate and control the functions of a fire alarm installation, thus allowing signals to be distributed around a large site.

The network will accommodate upto 64 nodes. The network uses RS485 data communication and a total network cable length of up to 10km is possible.

On a Smart Connect Multiloop running in a network, all events are reported at all panels are able to remotely program other panels sitting on the network. Operaton of outputs over the netowwrk is determind by the programmed cause & effetcs. Any input on the network can be programmed to operate any output.


  • Designed to EN54 requirements
  • Peer-to-peer networking
  • Comprehensive cross network cause & effects
  • Remote programming over the network
  • The network can be configured with either a ring or bus topology
  • Extensive front unit status indications (See datasheet)
  • Quick and easy to install by plugging the RJ45 cable into the module and control panel (Cable supplied with unit)


  • Communication Protocol: RS485
  • Maximum Distance Between Nodes: 1KM (using a screened data cable / 100M (using a standard fireproof cable)
  • Network Wiring Typologies: Bus / Ring (recommended)
  • Operating Temperature: 0°C (32°F ) to 49°C (120°F)
  • Max Humidity: 93% Non-Condensing
  • Size (mm) (HxWxD): 105mm x 57mm x 47mm
  • Weight: 0.15KG
  • Recommended Cable Sizes: Belden Screened Data Cable


Additional information

Weight 0.5 kg