Vimpex
Know what you're looking for?
Showing all 26 results
-
Fire-Cryer Solo Voice Base Sounder with Single Fixed Message
Vimpex- No special wiring, easily retro-fitted
- Fully synchronised
- Uses rocking armature technology for highly intelligible speech
-
UGO Reset Call Point Key Tool
Vimpex- 'Swiss army knife' of call point keys
- Covers most major fire alarm call point brands
- Reduced risk of lost call point keys
-
Banshee Excel BS Conventional Base Sounder
Vimpex- Slimmest profile in the industry
- Low current consumption
- Available in white or ivory to match to detectors
-
-
Banshee Excel Flashdome LED Beacon With Optional IP66 Base
Vimpex- Ultra-efficient LEDs.
- Very low current consumption.
- Sleek, low-profile design.
- Compatible with other Excel Sounders and Sounder Beacons and accessories.
- Uses same bases as Banshee - simple push and twist bayonet mounting with locking screw.
-
Banshee Excel Lite CHL IP66 Sounder & LED Beacon
Vimpex- IP66 or weathproof rated (Deep Base option only)
- Very low consumption conventional sounder/flasher
- Easy to install
- Choice of 3 volume levels
-
ClamBell EN54-3 Approved Fire Alarm Bell
Vimpex- Permanently fitted gong.
- Specifically designed weatherproof back box.
- Slick and modern looking.
- Fully customised pad printed branding.
- Strobell EN-23 VAD option which integrates ClamBell and VAD for unique combined unit will be available soon.
-
-
Hydrosense Conventional Water Detection Control Panel
Vimpex- Conventional Hyrosense water detection control panel.
- Ideal for small and medium sized installations.
- 2, 4 and 8 zone control panels available, with all variants featuring battery standby as well as common fault and alarm relay contacts.
- Simple to install and maintain.
-
Hydrosense HS Conventional Repeater Panel
Vimpex- Hydrosense HS repeater panel to show alarm infromation in additional location.
- Available in 2, 4 or 8 zones sizes.
- Optional integral PSU.
-
Hydrosense HS Conventional Water Detection Hydro-Probe
Vimpex- Point leak detection for Hydrosense HS water detection system.
- Ideal for areas where moisture is permitted.
- Drip tray and floor.
-
Hydrosense HS Conventional Water Detection Hydro-Probe Junction Box
Vimpex- Interfaces Hydro-Probe with HS panel field wiring.
- 1 Hydro-Probe per junction box.
- Housed in attractive polycarbonate encosure.
-
Hydrosense HS Conventional Water Detection Hydro-Wire
Vimpex- Consistent leak detection along the total length of cable.
- Available in 5 and 10 metre lengths (other lengths on request).
- Simple connection and termination.
- Aesthetically attractive.
-
Hydrosense HS Hydro-Wire Connection Interface
Vimpex- Interfaces Hydro-Wire with HS panel field wiring.
- 1 Hydro-Wire length per junction box.
- Housed in attractive polycarbonate encosure.
-
-
Identifire 12 or 24V Single Gang Power Supply
Vimpex- Works at 12 or 24 V dc selectable via link.
- Consistent Identifire design.
- Can be surface or flush mounted.
- Bright green LED power indicator.
- PCB cover to protect users from mains voltage.
-
Identifire 24 or 12V Auxiliary Relay
Vimpex- Flush or surfaced mounted options Mains voltage switching capability.
- 4 x 20 mm knockouts for surface and glanded cable entry.
- Terminals to allow daisy chaining of multiple units.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltages.
- Bright LED indicating unit activation.
- Consistent look and feel to all other Identifire products.
-
IdentiFire Remote LED Indicator With Optional Buzzer
Vimpex- Very bright, easily visible LED.
- Suitable for use on both conventional and addressable alarm systems.
- Available as flush or surface mounted option.
- Available with optional buzzer.
-
Identifire TriTone Conventional Sounder
Vimpex- Approved to EN54-3 by UL.
- 96 dB(A) output.
- 6 mA current consumption.
- Low profile and subtle design.
-
Identifire VID Conventional VID Beacon Only
Vimpex- Very bright VID beacon.
- Ideal for many general signalling applications.
- Can be grid mounted for industrial applications.
- Five different lens colours available.
-
Identifire Wide Voltage Relay
Vimpex- Wide Voltage range for multipurpose use.
- Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltage.
- Terminals to allow daisy-chaining of multiple units.
- Flush or surface mounted options.
-
IS FlashDome Intrinsically Safe Beacon
Vimpex- Intrinsic safe certified beacon.
- Suitable for zones 0, 1 or 2.
- IP66 rated.
-
StroBell Combined Fire Alarm Bell With White LED Beacon
Vimpex- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Familiar installation method
- Low current consumption
- Single point of installation minimises wiring andassociated costs
- Strobe synchronisation with no additional wiring (synchronisation not covered by approval
- Can be wired as a two stage alarm, with both bell and visual alarm on separate circuits (not approved in this configuration)
-
Vimpex 6 or 8 Inch Weatherproof Bell
Vimpex- Weatherproof fire alarm bell suitable for external applications
- Available in either 6 or 8 inch versions
- Excellent sonorous tone up to 100dB(A) at 1m
-
Vimpex Identifire IDBTS Base Sounder with Cover
VimpexKey Features
- 32 Tones
- EN 54-3 tested and fully approved in accordance with CPR
- Slimmest profile in the industry
- Low current consumption
- Omni-directional sound
- Front plate for stand-alone use available
- Four selectable volume levels
- Installer friendly terminals
- Ceiling or wall mounting
- Robust and easily connected ‘two in two out’ 2.5mm terminals
-
Waterproof Door Holder
Vimpex- Ideal for Harsh Environments
- 24v and 230v options
- Terminated IP65 Connector
- Robust Steel Construction