Duct Units
The Zeta duct unit allows air in a ventilation duct to be monitoried for smoke via a smoke detector mounted externally in a sealed chamber. The unit comes supplied with 2 sampling probes (one in & one out) which are mounted through the duct in the centre of the air flow.
Know what you're looking for?
Showing all 10 results
-
Apollo Intelligent Duct Smoke Detector
Apollo- Operates in Air Speeds of 0.5m/s to 20m/s
- Transparent Cover to View Detector Head LED
- Integral Smoke Test Port
-
Apollo Orbis Duct Detector
ApolloKey Features
- For use with Series 65 or Orbis detectors.
- Operates in air speeds of 0.5m/s to 20m/s.
- Transparent cover to view detector head LED.
- Integral smoke test port.
- Volt-free contacts.
-
Gent S4-34760 Duct Smoke Sensor Housing with Sensor Base & 0.6m Tube
Gent- Direction of flow indicated by housing.
- Single sampling tube.
- Compatible with S-Quad Sensors.
- Sampling tubes available in three lengths.
- Mounting bracket available.
- Remote LED can be installed via S-Quad monitor output.
- Air Duct uses Venturi process.
- Fully integrated into Vigilon loop.
-
Hochiki SDP-3 Duct Detector Mounting Box Including 600mm Pipe
Hochiki- Allows air duct sampling using standard detector or sensor.
- Fits either square or round section ducting (with additional bracket).
- One-tube air sampling system.
- Simple installation/ maintenance with installer-friendly connection of cables.
- Supplied with standard 600mm sampling pipe.
-
Series 65 Conventional Duct Smoke Detector
Apollo- For use with Series 65 or Orbis detectors
- Operates in air speeds of 0.5m/s to 20m/s
- Transparent cover to view detector head LED
- Integral smoke test port
- Volt-free contacts
-
Zeta Duct Unit Enclosure
Zeta Alarms- Monitors air in a ventilation duct.
- Supplied with 2 probes (650mm & 320mm).
-
Zeta Fire Alarm Duct Unit c/w 12V Relay Board
Zeta AlarmsThe ZT-DU/12 enclosure c/w Fyreye base and relay board with form C relay outputs for alarm and for fault which requires 12V power supply.
-
Zeta Fire Alarm Duct Unit c/w 230V Relay Board
Zeta AlarmsThe ZT-DU/230 enclosure c/w Fyreye base and relay board with form C relay outputs for alarm and for fault which requires 230V power supply.
-
Ziton FDD710 Single Pipe Universal Duct Detector
Ziton- One-pipe air sampling system.
- Conventional or analogue addressable detectors.
- Test hole on cover.
- Simple installation.
- Sensitive flow indication.
-
Ziton FDD710LP 1.5m Extension Pipe For FDD710
Ziton- Used with FDD710 duct detector.
- Extra long for large ducts.
- Unique one-pipe sampling system.
- Easy installation.