Gent
Know what you're looking for?
Showing all 23 results
-
Gent 34000 Series Remote LED Indicator
Gent- Maximum 100 per loop
- Device load factor 1
- For use with S4-700 base
-
Gent S4 Single Channel Interface, Low Voltage Input Only
Gent- Gent Interface units are designed to provide heavy duty relay switching for 24V applications with contacts rated at 10A
- Connects directly to the Vigilon system
-
Gent S4 Single Input & Single Output Low Voltage Interface
Gent- Loop Powered devices reducing cost of installation and maintenance
- Individual addresses to maximise information and flexible cause and effect
- Each device with EN54-17 short circuit handling for enhanced system integrity
- Comprehensive range of functionality in each device variant to simplify system design
- Complete range of mounting enclosures and accessories
- Options to connect conventional fire detectors such as flame and beam detectors
- Certified to EN54-17 and EN54-18
-
-
Gent Addressable Manual Call Point
Gent- Resettable or break glass.
- Lift up protective covers.
- Keyswitch
- Weatherproof version (IP67) suitable for external areas
- Up to 200 per loop
- Integral short-circuit isolator
- Surface or Semi Flush options
-
Gent ES Detect Conventional Heat Detector
Gent- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
-
Gent ES Detect Conventional Standard Base With or Without Diode
Gent- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
Gent ES Optical Smoke Conventional Detector
Gent- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent Indoor Conventional Manual Call Point
Gent- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
-
Gent Obscuration Test Card Kit For Beam Detector
Gent- Manufacturer: Gent by Honeywell
- Obscuration Test Card Kit
- For Use With Beam Detectors
-
Gent S-Quad Addressable Detector
Gent- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
-
Gent S-Quad Addressable Detector with Sounder
Gent- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice
Gent- Dual optical heat sensor
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice & VAD Beacon
Gent- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S4-34760 Duct Smoke Sensor Housing with Sensor Base & 0.6m Tube
Gent- Direction of flow indicated by housing.
- Single sampling tube.
- Compatible with S-Quad Sensors.
- Sampling tubes available in three lengths.
- Mounting bracket available.
- Remote LED can be installed via S-Quad monitor output.
- Air Duct uses Venturi process.
- Fully integrated into Vigilon loop.
-
Gent Square Replacement Glass (Pack of 10)
Gent- For use with the "Old Style" Square Gent Call Points
- Dimensions: 68 x 62 x 2mm
- Manufacturer: Gent by Honeywell
-
Gent Vigilon Call Point Cover
GentKey Features
- Manufacturer: Gent by Honeywell
- Designed for use with the Gent Vigilon Call Points
- Hinged Design For Access To Call Point Element
- Made from Polycarbonate Plastic
- Helps prevent accidental & malicious alarm activations
-
Gent VS-KEY Spare Door Key for Vigilon & Compact Panels
Gent- Spare door key for Gent Vigilon & Compact panels.
- Available individually or in packs of 10.
-
Gent Weatherproof Conventional Manual Call Point
Gent- Fully compliant with EN54, Part 11.
- Glass operating element.
- Weather proof IP67.
- Supplied with surface mount back box.
-
Gent Xenex 13271-08LB 8 Zone Repeater Panel
Gent- 8 zone repeatre panel compatible with Xenex conventional panel.
- Repeat alarm information in second location.
- Maximum of only one, 8 zone repeat panel per system.
-
Gent Xenex 2, 4 or 8 Zone Conventional Panel
Gent- 2, 4 or 8 zone conventional panel from Gent.
- Up to 8 conventional sounder circuits.
- One-man test and commissioning features.
-
Gent XENS-SPARES Spares Pack For Xenex Panels
Gent- Spare pack for Gent Xenex panels.
- Includes EOLs, battery link, screws and fuses.
-
Gent: Call Point Test Key – Pack of 10
GentKey Features
- Gent - Call Point Test Key - 14112-10 (Pack of 10)
- This is a replacement Test Key for Gent Manual Call Points.