Apollo Intelligent DIN-Rail Switch Monitor
£48.65 (inc VAT: £58.38)
Summary
The Intelligent DIN-Rail Switch Monitor is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status. It has a selectable status reporting delay making it suitable for monitoring flow switches. Compatible with XP95, Discovery and CoreProtocol digital communication protocols.
Mechanical Construction:
The Intelligent DIN-Rail Switch Monitor is designed to be mounted on a 35 mm width DIN-Rail inside an enclosure.
Features
- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator
- Address range 1 – 254
- Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems
- Failsafe mode (meets BS 7273-4 requirements)
- Configurable input styles
- Earth fault monitoring
Specifications
- Supply Voltage (Vmin-Vmax) : 17-35 V dc
- Protocol: 5-13 V peak to peak
- Power-up Surge Current: 900µA
- Quiescent Current: 500 uA
- Max Current LEDs On 3.5mA
- Max Current LEDs Disabled: 500uA
- Relay Output Contact Rating: 1A at 30V dc or ac
- Isolator Data: Refer to the Short-Circuit Isolation datasheet
- Operating Temperature: -40°C to +70°C
- Humidity (No condensation or icing) : 0% to 95% RH
- Vibration, impact & shock : EN 54-17 & EN 54-18
- Standards & Approvals : EN 54-17, EN 54-18, CPR, LPCB, VdS, BOSEC, SBSC, FG
- Dimensions : 33mm (H) x 102mm (W) x 33mm (D)
- Weight: 49g
Downloads
- Datasheet (Adobe PDF)
- Installation Manual (Adobe PDF)
Additional information
Weight | 1 kg |
---|