Addressable Interface Units
Know what you're looking for?
Showing all 50 results
-
Gent S4 Single Channel Interface, Low Voltage Input Only
Gent- Gent Interface units are designed to provide heavy duty relay switching for 24V applications with contacts rated at 10A
- Connects directly to the Vigilon system
-
Gent S4 Single Input & Single Output Low Voltage Interface
Gent- Loop Powered devices reducing cost of installation and maintenance
- Individual addresses to maximise information and flexible cause and effect
- Each device with EN54-17 short circuit handling for enhanced system integrity
- Comprehensive range of functionality in each device variant to simplify system design
- Complete range of mounting enclosures and accessories
- Options to connect conventional fire detectors such as flame and beam detectors
- Certified to EN54-17 and EN54-18
-
Apollo Intelligent DIN-Rail Input Output Unit
Apollo- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator
- Address range 1 - 254
- Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems
- Failsafe mode (meets BS 7273-4 requirements)
- Configurable input styles
- Earth fault monitoring
-
Apollo Intelligent DIN-Rail Switch Monitor
Apollo- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator
- Address range 1 - 254
- Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems
- Failsafe mode (meets BS 7273-4 requirements)
- Configurable input styles
- Earth fault monitoring
-
Apollo Intelligent Single or Twin Input/Output Unit with Isolator
Apollo- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator
- Address range 1 - 254
- Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems
- Failsafe mode (meets BS 7273-4 requirements)
- Configurable input styles
- Earth fault monitoring
-
Apollo Intelligent Switch Monitor
Apollo- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator
- Address range 1 - 254
- Five pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems
- Priority mode for fast response
- Configurable input styles
- Earth fault monitoring
-
Apollo XP95 3 Channel Input/Output Unit
Apollo- Uses a single address.
- Allows independent monitoring of input channels.
- Allows independent control of output relays.
-
Apollo XP95 Addressable Output Unit
Apollo- The Output Unit provides a voltage free single pole, changeover relay output.
- It is a simplified version of the Input/Output Unit without circuitry for monitoring inputs.
-
Apollo XP95 DIN-Rail Dual Isolator
Apollo- Loop-powered
- Polarity sensitive
- Up to 20 detectors can be installed between isolators
- Allows fully isolated spurs
-
Apollo XP95 DIN-Rail Mains Switching Input / Output Unit
Apollo- It can report fault, switch open and switch closed levels
- Three visible LEDs
- Capable of switching up to 8A at 250V AC
- Fits a standard 35mm DIN-Rail
-
Apollo XP95 DIN-Rail Sounder Controller (5 Amperes)
Apollo- Allows sounders to be operated continuously or be pulsed, 1 second on, 1 second off
- May be synchronised with loop sounders
- An opto-coupled input is provided to monitor the state of the external power supply
- Features group addressing
- Will accept a load of up to 5A
-
Apollo XP95 Input/Output Unit With Isolator
ApolloThe Apollo XP95 Input/Output Unit provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.
-
Apollo XP95 Intelligent Twin Switch Monitor
Apollo- Twin switch montor for Apollo intelligent systems.
- Improved design for ease of wiring meaning faster installation.
- Contains controllable isolator.
- Address range 1 - 254.
- Five pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems.
-
Apollo XP95 Mini Switch Monitor
ApolloEnter a brief description of your product here. This description will be displayed on product list pages.
-
Apollo XP95 Sounder Circuit Controller
Apollo- The Sounder Control Unit is used to control the operation of a zone of conventional sounders and report their status to the control panel.
- Allows sounders to be operated continuously or be pulsed; 1 second on, 1 second off
- May be synchronised with loop sounders
-
Apollo XP95 Switch Monitor
Apollo- Designed to monitor one or more Single Pole Volt Free Contacts and report the status
- 4 Input States
- Two Visable LED's
- Loop Powered
-
Apollo XP95 Zone Monitor Unit with Isolator
Apollo- Fitted with a bi-directional short circuit isolator
- unaffected by loop short circuits
-
-
DIN-Rail Zone Monitor with Isolator
Apollo- Loop-powered
- Visible short-circuit and alarm
- LEDs Built-in Isolator
-
Nittan Evolution Dual Input, Single Output Module with Isolator
Nittan- Dual Input, single output module for Nitttan Evolution addressable systems
- Integral short circuit isolator
-
Dual Input, Zone Monitor Module with Isolator
NittanEnter a brief description of your product here. This description will be displayed on product list pages.
-
Dual Output Sounder Control Module with PSU Fault input and Isolator
Nittan- Dual output sounder control module for Nittan Evolution system.
-
Eaton CMIO353 230V AC Addressable Intelligent Relay Unit
Eaton- Mains rated relay unit.
- Input monitored for open and short circuits.
- Single address.
- Quick and simple to install.
- Achieves simplified interpanel interfacing.
-
Fike Sita 803-0005 Addressable Mutipoint ASD Interface Boxed Module
Fike- Provide input or output via ASD detector on a Fike Sita addressable systems.
- Output relay rated at 30V DC 0.5A.
- Supplied in single-gang box enclosure.
-
Fike Sita 803-0006 Addressable I/O Module
Fike- Provides an interface between ancillary devices and Fike Sita addressable systems.
- Suitable for both low and mains voltage applications.
- Supplied with double gang back box.
-
Fike Sita 803-0010 Addressable Conventional Zone Module
Fike- Provides the facility to connect 1 zone of conventional resistance monitored devices to Fike Sita addressable systems.
- Supplied with double gang back box.
-
Fike Sita 803-0022 Addressable Monitored Output Unit
Fike- Monitored output unit to Fike Sita addressable systems.
- Provides a single 24V DC monitored output suitable for the control of conventional sounders/beacons.
- Supplied with double gang back box.
-
Zeta Addressable Input/Output Module (Mains & Low Voltage)
Zeta Alarms- Loop powered
- Equipped with short circuit line isolator
- Hand addressed using the 8 way dip switch OR softly addressed using the handheld MKII Programmer
-
Fyreye MkII Addressable Input Module with S/C Isolator (loop powered)
Zeta Alarms- Loop powered (60 devices per loop as maximum)
- Hand addressed using the 8 way dip switch OR softly addressed using the handheld MKII Programmer
- Equipped with short circuit line isolator
-
Hochiki CHQ Adaptor For New CHQ Modules
Hochiki- Allows the PCB Component of CHQ Modules to be Housed
- Footprint Matches Older Enclosure Sizes
-
-
Hochiki CHQ Module Backbox
Hochiki- Increases CHQ "Smart-Fix" Modules IP Rating to IP69
- Robust and Durable
- 10 Knock outs for Glanded Cable Entry
-
Hochiki ESP Analogue Dual Input Module With DIN Option
Hochiki- Single Loop Address
- Loop Powered
- DIN Rail Version Available
- Integeral SCI
-
Hochiki ESP Analogue Dual Relay Controller with DIN Rail Option
Hochiki- Loop Powered
- Single Loop Address
- Auxillary Monitored Input
- DIN Rail Version Available
-
Hochiki ESP Analogue Plant Control Module with DIN Rail Option
Hochiki- Simgle Loop Address
- Loop Powered
- DIN Rail Version Availanle
- Approved by LPCB
-
Hochiki ESP Analogue Single Input Monitor
Hochiki- Single un-monitored input.
- Non-polarised loop connections.
- Sleep mode for low power consumption.
- Monitor LED (when fitted) - flashes when unit is polled, continuously illuminated in alarm.
-
Hochiki ESP Dual Sounder Controller with SCI with DIN Rail Option
Hochiki- Single Loop Address
- Two Independant Sounder Circuits
- DIN Rail Version Available
- Auxillary Monitored Input
-
Hochiki ESP Dual Zone Monitor with SCI With DIN Rail Option
Hochiki- Single Loop Address
- Requires an Aux 24V Supply
- DIN Rail Version Available
- Intrinsically Safe Version Available
-
Hochiki ESP Intrinsically Safe Sounder Interface Module With DIN Rail Option
Hochiki- Provides Dual Sounder Circuits
- Fault Monitored Input
- Requires 24VDC External Power Supply
- Available in DIN Module
-
Hochiki ESP Mains Relay Controller With SCI With DIN Rail Option
Hochiki- Loop Powered
- Single Loop Address
- DIN Rail Option
- Aux Monitored Input
-
Hochiki ESP Powered Output Module
Hochiki- 24V Supply at Various Currents
- User Selectable Output
- Two Monitored Inputs
- Colour Coded Flying leads for easy installation
-
Hochiki ESP Single Input Module
Hochiki- Single Monitored Input
- Small Design
- Flying Leads for Easy Installation
- Approved by LPCB & VdS
-
Hochiki ESP Single Output Module
Hochiki- Includes a Single Monitored Output
- Flying Leads for Easy Installation
- Approved by LPCB
-
Hochiki ESP Single Zone Monitor with SCI with DIN Option
Hochiki- Loop Powered
- Single Loop Address
- Remote LED Output
- DIN Rail Version Available
-
Hochiki ESP Sub Box Assembly
Hochiki- Dobust Design
- Compatible with all CHQ Modules
- Used to Replace Damaged Components
-
Intelligent Mains Switching Input/Output Unit
Apollo- Improved design for ease of wiring meaning faster installation
- Contains controllable isolator*
- Address range 1 - 254
- Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems
- Two input channels
- Failsafe mode (meets BS 7273-4 requirements)
- Configurable input styles
- Earth fault monitoring
-
Nittan Evolution Addressable Input, Output or Combined Module
Nittan- Input, Output or Combined Module.
- EEPROM Addressed (Programmer).
- Housing fits MK II Gang Pattress Box.
-
Zeta Special Mini Modules (White) – Beam Detector
Zeta Alarms- Allows the Zeta Beam Xtra to be connected to a Zeta MKII addressable loop
- Hard addressed via dip-switches
-
Fyreye MkII Addressable Zone Monitoring Unit with S/C Isolator (loop powered)
Zeta Alarms- This is a loop powered device, however loop load calculation must be performed to determine the permissable quantity of ZAZM-MI per loop.
- Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
- Equipped with short circuit line isolator
-
Fyreye MkII Addressable Sounder Control Module With Isolator
Zeta Alarms- This is not a loop powered device and an adequate 24Vdc input (with battery backup) is needed.
- Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
- Equipped with short circuit line isolator