C-Tec CAST Input Output Module
Summary
The C-Tec CAST Input Output Module is a LPCB and Kiwa Telefication certified device that combines the functions of a switch monitor, zone monitor, and output unit for fire alarm systems.
Features
- It can monitor up to 20 conventional detectors, 10 manual call points, and any normally open switch with an EOL resistor or a simple normally open or closed switch
- It incorporates an onboard short-circuit loop isolator and has a low typical alarm current of 5.5mA (1.3mA quiescent) at 22-40V DC
- It can switch 1A@30V DC (or 0.3A@125V AC) and includes volt-free changeover contacts for triggering devices like roller-shutter doors, gas shut-off valves, and smoke vents
Specifications
- Activation current : 5.5mA @ 22 to 40V DC
- Auxiliary relays : One volt-free single pole changeover relay rated at 1A @ 30V DC (or 0.3A @ 12 V AC). Non-monitored.
Clean contact - Auxiliary inputs: One monitored input that can be set to operate as a single zone monitor to support up to 20 ActiV detectors
and 10 MCPs or (2) a monitored normally-open switch, triggered by a 470R - Indicators : Active (Lit Red): relay activated; monitored zone triggered or monitored switch closed; Polling (Flashing
Red): communication check with the panel; Input Fault (Lit Yellow): fault detected on the m - Connections: Six 45º screw-type connectors that can take 0.5-2.5mm2 cable: +Veâ&â-Ve LoopâIn; +Ve &â-Ve Loop Out;
Zone +Ve & -V. Also includes N/O, N/C & C relay connections - Product dimensions (mm) : 147 W x 87H x 22 D mm. Can be mounted on a standard 25mm UK flush or surface double gang back box
- Construction & finish : ABS Polycarbonate plate with a 200 micron two-tone grey velvet polyester label with red and white
detailing. - IP Rating : IP40 when correctly installed
- Weight : 122g
- Operating conditions/temperature: -10ºC to +55ºC
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 2.1 kg |
|---|