C-Tec CAST Mini I/O Unit
£35.46 (inc VAT: £42.55)
Summary
The C-Tec CAST Input Output Module is a LPCB and Kiwa Telefication certified device that combines the functions of a switch monitor, zone monitor, and output unit for fire alarm systems.
Features
- It can monitor up to 20 conventional detectors, 10 manual call points, and any normally open switch with an EOL resistor or a simple normally open or closed switch
- It incorporates an onboard short-circuit loop isolator and has a low typical alarm current of 5.5mA (1.3mA quiescent) at 22-40V DC
- It can switch 1A@30V DC (or 0.3A@125V AC) and includes volt-free changeover contacts for triggering devices like roller-shutter doors, gas shut-off valves, and smoke vents
Specifications
- Activation current : 7mA @ 22 to 40V DC
- Supply/operating voltage: 22 to 40V DC.
- Quiescent current : 1mA typical
- Approvals/certifications : LPCB certified to EN54-3, 17 & 23 and Kiwa Telefication certified to EN54-13
- Compatibility : Compatible with C-TEC’s XFP/ZFP CAST Addressable Fire Panels
- Auxiliary relays : One volt-free single pole changeover relay rated at 1A @ 30V DC (or 0.3A @ 12 V AC). Non-monitored.
Clean contact - Auxiliary inputs: One monitored input that can be set to operate as a single zone monitor to support up to 20 ActiV detectors
and 10 MCPs or (2) a monitored normally-open switch, triggered by a 470R - Indicators : Single Red (Relay Active & Polling); Single Yellow (Monitored Input Fault)
- Product dimensions (mm) : 65 W x 65H x 20 D mm (excluding terminal block & ribbon cable). Ribbon cable is 150 mm length
- Construction & finish : Clear ABS polycarbonate enclosure
- IP Rating : IP40
- Weight : 47g
- Operating conditions/temperature: -10ºC to +55ºC
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 2.1 kg |
|---|