C-Tec CFP 8 Zone Conventional Repeater Panel
£146.85 (inc VAT: £176.22)
Key Features
- Can be used to repeat the functions of a master CFP standard or AlarmSense 2-8 zone fire panel at remote parts of site (e.g. all potential fire service entrances).
- Up to 8 repeaters per CFP master.
- Includes its own Mains power supply that requires its own standby battery supply.
- Provides the user with access to all AL1 and AL2 functions.
- Master/Repeater communication achieved using CFP761 network driver cards (one CFP761 is supplied with the Repeater, an additional CF761 card is required at the master CFP).
- Communicates over screened two-wire fire resistant cable.
- Total repeater network cable length should not exceed 1KM.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
Specifications
- Compatibility : Compatible with C-TEC’s CFP Standard and CFP AlarmSense panels. (CFP Economy panels cannot be extended with this product).
- Mains Supply : 230V 50/60Hz.
- Internal Power Supply : 19V-28.5V (27V nominal).
- Max Battery Size and Type : 2 x 12V 2.1Ah VRLA connected in series for 72 hour standby. 2 x 12V 1.2Ah for 24 hours.
- Max. Network Cable Length : 1KM.
- Product Dimensions (mm) : 380 W x 235 H x D 96mm.
- Construction & Finish : Plastic lid and base; RAL7035 textured
- IP Rating : IP30.
- Weight : 1.75kg (without batteries)
- Operating Conditions/Temperature : -5ºC to +40ºC. Max relative humidity: 95%.
- Product Dimensions : 367 W x 235 H x 96 D mm.
- Hole Required For Flush Mounting : 367 W x 220 H x 75 D mm. No bezel required.
FAQ
How many cores are required between CFP761 & CFP760?
Only 2 cores of fire rated cable are required.
Downloads
- Instructions (Adobe PDF)
Additional information
| Weight | 10 kg |
|---|