Shopping Basket

0 Items

Subtotal £0.00

Fyreye MkII Addressable Zone Monitoring Unit with S/C Isolator (loop powered)

£45.05 (inc VAT: £54.06)

Low Stock


The ZAZM-MI is supplied in a modern enclosure (2 gang box size) with well protected electronic circuit board to minimize any damages during installation. It is supplied with a back box suitable for surface mount indoor installation. Designed and manufactured to meet the requirement of EN54-18 2005 and EN54-17 2005..

The ZAZM-MI is a conventional zone that can be used for conventional devices and/or for special detectors that are not available in addressable form such as UV detectors, Aspiration detectors etc.


  • This is a loop powered device, however loop load calculation must be performed to determine the permissable quantity of ZAZM-MI per loop.
  • Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
  • Equipped with short circuit line isolator
  • Extensive front unit indications


  • Part Number: ZAZM-MI
  • Operating Voltage: 17-28V DC
  • Quiescent Current: 3.5mA
  • Alarm Current (LED OFF): 12.6 mA
  • Alarm Current (LED ON): 13.2 mA
  • Isolating Current: 7.3mA
  • End of Line Resistor: 6.2k
  • Nominal Alarm Triggering Resistor: 1k
  • Operating Temperature: -10C to 55C
  • Max Humidity: 95% RH Non Condensing
  • IP Rating: IP21C
  • Size: 150 x 90 x 45 mm
  • Weight: 220g


Additional information

Weight 1 kg