Hochiki ESP Analogue Single Input Monitor
£22.90 (inc VAT: £27.48)
Summary
The CHQ-CP2 is a loop powered single input monitor unit designed to be used as a call point module for special applications such as addressable key-switches and explosion proof call points.
The default device type allocated by the Fire Alarm Control Panel will be a call point.
As shown below, the unit consists of a single PCB and several flying leads, which should be connected as described in the Wiring Diagram below.
Key Features
- Single un-monitored input.
- Non-polarised loop connections.
- Sleep mode for low power consumption.
- Monitor LED (when fitted) – flashes when unit is polled, continuously illuminated in alarm.
Specifications
- Supply Voltage : 17 – 31 V
- Current Consumption (Loop) :
- Quiescent : 230 A (typ)
- Sleep Mode, 0.75s Polling : 38 A (typ)
- Loop Current (When Polled) : 22 mA±20%
- Loop Current (Alarm) – LED on : 5 mA
- ON Threshold Level : < 50
- OFF Threshold Level : > 100 k
- Operating Temperature Range : -10C – +50C
- Storage Temperature Range : -30C – +60C ( <80% RH at 60C)
- Relative Humidity : 95% RH at 40C non-condensing
- Dimensions : 44.5 mm x 36.5 mm
- Weight : 15 g (not including casing)
Downloads
- Datasheet (Adobe PDF)
Additional information
Weight | 0.02 kg |
---|