Shopping Basket

0 Items

Subtotal £0.00

Kentec Sigma XT+ Extinguishant Coincidence Unit 1 Area to EN12094-1 (Surface)

£434.71 (inc VAT: £521.65)

Low Stock

SKU: K21001M2 Category: Brand:

Summary

The Sigma XT+ ECU coincidence unit has two fully monitored inputs for connection to fire detection control equipment or addressable control modules to provide an EN12094-1, EN54-2 and EN54-4compliant extinguishant control system. Its many programmable features and extensive range of inputs and outputs make the Sigma XT+ ECU coincidence unit suitable for all extinguishing applications where a fully featured control device is required.

Among the many features of the Sigma XT+ ECU are serially connected status units for reduced wiring and reduced installation cost, dual extinguishant outputs that may be configured for main/reserve applications and a countdown timer which displays the time until discharge of the extinguishant in seconds. All units are independently configurable via a simple, code based programming interface to suit the desired application.

Features

  • Approved to EN12094-1, EN54-2 and EN54-4
  • Dual extinguishant outputs
  • First and second stage sounder outputs
  • First and second stages relay contacts
  • Serial connection to status units
  • Discharge countdown time indicator

Downloads

Additional information

Weight 15 kg

Related Products

  • Kentec Boxed Sigma XT Ancillary PCB 0.75 A PSU: Surface

    Kentec Boxed Sigma XT Ancillary PCB 0.75 A PSU: Surface

    • Two-wire serial connection
    • Up to 7 per system
    • 230V AC or 24V DC powered versions
    • Volt free relay outputs for fire and extinguishing system status
    • Relay operated LED indicators

    Low Stock

    £231.85 (inc VAT: £278.22)
  • Kentec Sigma XT Ancillary Card

    Kentec Sigma XT Ancillary Card

    • Two-wire serial connection
    • Up to 7 per system
    • 230V AC or 24V DC powered versions
    • Volt free relay outputs for fire and extinguishing system status
    • Serial connection to status units
    • Relay operated LED indicators

    Low Stock

    £120.07 (inc VAT: £144.08)
  • Sigma Extinguishing Hold Off Unit with Green or Red Button

    Sigma Extinguishing Hold Off Unit with Green or Red Button

    • Shrouded push button to prevent inadvertent operation.
    • Activation resistor included.
    • Compatible with all Sigma XT and Sigma XT+ models.
    • Robust steel surface mount enclosure.
    • Flush mount collar available.

    Low Stock

    £55.51
  • Kentec Boxed Sigma XT Ancillary PCB Boxed: Surface

    Kentec Boxed Sigma XT Ancillary PCB Boxed: Surface

    • Two-wire serial connection
    • Up to 7 per system
    • 230V AC or 24V DC powered versions
    • Volt free relay outputs for fire and extinguishing system status
    • Relay operated LED indicators

    Low Stock

    £169.75 (inc VAT: £203.70)
  • Placeholder

    Kentec Extinguishant Module Including PCB and Plate

    Enter a brief description of your product here. This description will be displayed on product list pages.

    Low Stock

    £318.79 (inc VAT: £382.55)
  • Sigma XT Extinguishant Extract Key Switch

    Sigma XT Extinguishant Extract Key Switch

    • Common ‘901’ keyswitch.
    • Key trapped in operated position.
    • Compatible with all Sigma XT and Sigma XT+ models.
    • Robust steel surface mount enclosure.
    • Flush mount collar available (part nmber M10FCLGT).

    Low Stock

    £67.96 (inc VAT: £81.55)
  • Kentec Sigma CP Ancillary PCB

    Kentec Sigma CP Ancillary PCB

    Enter a brief description of your product here. This description will be displayed on product list pages.

    Low Stock

    £123.80 (inc VAT: £148.56)
  • Kentec Main / Reserve Duty Extinguishant Key Switch Unit

    Kentec Main / Reserve Duty Extinguishant Key Switch Unit

    • Common ‘901’ keyswitch
    • Key unretained
    • Compatible with Sigma XT and Sigma XT+ models
    • Robust steel enclosure
    • Surface or single gang flush mounted

    Low Stock

    £69.91 (inc VAT: £83.89)
  • Sigma SI Status Control Indicator

    Sigma SI Status Control Indicator

    • Certified compliant with BS EN12094-1 when used with Sigma XT control equipment.
    • High brightness LEDs.
    • Detailed indication of the status of the control panel.
    • Monitored data connection.
    • Countdown timer shows time remaining until release.
    • Manual only and Automatic & Manual mode select keyswitch option.
    • Four wire connection (data and power).
    • Protected dual action manual release switch option.
    • Option for zonal fire and common fault indication with buzzer.
    • Robust, high quality enclosure.
    • Easy access to terminals.
    • Remote Auto/Manual door interlock input (monitored).
    • Remote Hold input (monitored).
    • Internal fault diagnosis indicators.
    • Weatherproof IP65 versions available.
    • Internal buzzer.

    Low Stock

    £95.22£182.16
  • Kentec Sigma XT+ System Abort Button Unit

    Kentec Sigma XT+ System Abort Button Unit

    • Large mushroom head pushbutton
    • Twist to release latching action
    • Compatible with all Sigma XT+ models
    • Robust steel surface mounted enclosure
    • Flush mount collar available

    Low Stock

    £55.51 (inc VAT: £66.61)
  • Kentec Sigma CP Sounder PCB

    Kentec Sigma CP Sounder PCB

    • Two wire serial connections.
    • Up to 7 sounder boards per system.
    • 230V AC or 24V DC powered versions.
    • Zoned, 2-stage or common alarm
    • All outputs monitored for open and short circuit faults
    • Individual open and short circuit fault indicators
    • Fully monitored by main control panel
    • Class change input facility
    • Up to 8 outputs with 0.5A available from each
    • Can be connected to serial bus with Ancillary boards and repeaters
    • Boxed units in enclosure to match Sigma CP control panels
    • Power fault input for monitoring remote power supplies

    Low Stock

    £123.80 (inc VAT: £148.56)