Orbis Intrinsically Safe (IS) TimeSaver Base
£6.50 (inc VAT: £7.80)
Summary
The Orbis IS TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.
Installation:
It is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.
Features
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
Additional information
Weight | 0.06 kg |
---|---|
Hazardous Applications | |
Marine Applications | |
Relay | |
Short Circuit Isolator | |
System Type |
Related Products
-
Orbis Intrinsically Safe (IS) Heat Detector
Apollo- TimeSaver base provides simple installation
- StartUp flashing LED to confirm devices are wired in the correct polarity
- Continuity link enables voltage testing of zone wiring before commissioning
- DustDefy system prevents dust ingress while maintaining airflow
- Transient rejection uses algorithms to reduce false alarms
- Drift compensation maintains calibrated sensitivity levels even if the detector is contaminated
- DirtAlert shows the drift compensation limit has been reached
- Sensalert indicates incorrect detector operation
- FasTest maintenance procedure takes just 4 seconds to complete
- E-Z fit slots allow base to be fixed in position without removing mounting screws
- 360° visibility of LEDs
-
Orbis Intrinsically Safe (IS) Multisensor Detector
Apollo- Reduces false alarms.
- Sensitive to fast burning, flaming fires.
- Improved sensitivity to black smoke.
- Compensation for slow changes in sensitivity.
- Algorithms for reliability of alarm.
-
Orbis Intrinsically Safe (IS) Optical Smoke Detector with Optional Flashing LED
Apollo- TimeSaver base provides simple installation
- StartUp flashing LED to confirm devices are wired in the correct polarity
- Continuity link enables voltage testing of zone wiring before commissioning
- Wide angle optics respond well to a wide range of fires
- DustDefy system prevents dust ingress while maintaining airflow
- Transient rejection uses algorithms to reduce false alarms
- Drift compensation maintains calibrated sensitivity levels even if the detector is contaminated
- DirtAlert shows the drift compensation limit has been reached
- Sensalert indicates incorrect detector operation
- FasTest maintenance procedure takes just 4 seconds to complete
- E-Z fit slots allow base to be fixed in position without removing mounting screws
- 360° visibility of LEDs