Quantec Enuresis or General Purpose Interface Socket
£64.12 (inc VAT: £76.94)
Summary
Allows bed wet sensors, floor pressure mats and bed/chair exit sensors to be easily interfaced to a Quantec addressable call system. Includes two 6.35mm remote jack sockets – one for use with a QT635 enuresis/bed wet sensor and one that will accept a floor pressure mat (QT644), bed exit mat (QT633) or chair exit mat (QT634).
Onboard battery/isolation circuit ensures compliance with all relevant UK medical directives. Connects to Quantec via the ancillary input on a Quantec master call point or a QT630 dementia care controller. Can be programmed to generate a ‘standard’, ’help required’ or ‘emergency’ call on activation via a QT423 configurator at the master call point.
Key Features
- Includes a battery test button and low battery/enuresis active indicators
- Supplied on a double gang plate typically located at floor level
- Requires a PP3 battery
Specifications
- Alarm current: 20mA
- Max battery size and type: Requires a PP3 battery (not supplied)
- Indicators: Enuresis Active (Flashes red every four seconds when the QT635 Bed Wet Sensor detects moisture); Low Battery (Flashes amber every four seconds when the battery is low)
- Controls: TEST button (Press to confirm the enuresis circuitry is working (Enuresis Active indicator will illuminate red).
- Connections: N-; L+; Fault; Enuresis; Bed Exit – see main instructions for wiring details
- Onboard 6.35mm Remote Jack Socket: Yes (x2). One for a Bed Wet Sensor (QT635) and one for a floor pressure mat (QT644), bed exit mat (QT633) or chair exit mat (QT634).
- Product dimensions (mm): 146 W x 87 H x 33 D mm. Mount on a 35mm deep back box
- Construction & finish: Plastic
- IP Rating: IP20
- Weight: 130g
- Operating conditions/temperature: -5°C to +40°C. Max relative humidity: 95%.
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 1 kg |
|---|