Shopping Basket

0 Items

Subtotal £0.00

VESDA-E VEU Highest Sensitivity Aspirating Smoke Detector

£3,888.60£4,610.40

SKU: de8c61650e23 Category: Brand:

Summary

The VEU series of aspirating smoke detectors are the premium detector of the VESDA-E range. An Ultra-wide sensitivity range; 15 times greater than VESDA VLP, and provision for more sampling holes provide an increased coverage in high airflow applications by at least 40%. Considerably longer linear pipe runs and extended branched pipe network configurations cater perfectly to applications with higher ceilings providing an increased coverage by up to 80% whilst allowing convenient detector mounting for ease of service and maintenance. A range of revolutionary new features provide unsurpassed detection performance, flexibility, field programmability, connectivity and reduced total cost of ownership.

Flair Detection Technology

Flair is the revolutionary detection chamber that forms the core of the VESDA-E VEU, providing higher stability and increased longevity. Direct imaging of the sampled particles using a CMOS imager combined with multiple photo-diodes allows better detection and fewer nuisance alarms.

Installation, Commissioning and Operation

VESDA-E VEU features a robust IP40-rated enclosure and is equipped with a powerful aspirator that provides a total pipe length of 800 m (2,625 ft). Out of box operation is made possible with AutoConfig which allows airflow normalisation and AutoLearn Smoke and Flow to be initiated from within the detector. VEU is fully supported by the ASPIRE and Xtralis VSC software applications which facilitate ease of pipe network design, system commissioning and maintenance.

VESDAnet

VESDA devices communicate on VESDAnet which provides a robust bi-directional communication network allowing continued redundant operation even during single point wiring failures. VESDAnet enables primary reporting, centralized configuration, control, maintenance and monitoring.

Ethernet and WiFi connectivity

VESDA-E detectors offer Ethernet and WiFi connectivity as standard features. The detector can be added to a corporate network, allowing WiFi enabled tablet devices and laptops installed with Xtralis configuration software to connect wirelessly to the detector via the network.

Backward Compatibility

VESDA-E VEU is fully compatible with existing VESDA installations. The detector occupies the same mounting footprint, pipe, conduit and electrical connector positioning as VESDA VLP. VEU is also compatible with existing VESDAnet installations allowing monitoring of both VESDA-E and legacy detectors via the latest iVESDA application.

Applications

  • Accommodation (Apartments, Hotels, Shops and Offices)
  • Correctional Facilities
  • Clean Rooms
  • Cold Storage
  • Cultural/Heritage
  • Data & Telecom
  • Education
  • Hospitals & Healthcare
  • Insurance
  • Marine
  • Nuclear Facilities
  • Offices
  • Oil & Gas
  • Portable Switch Rooms
  • Power Generation
  • Records Storage
  • Retail
  • Transportation
  • Wind Power Generation
  • Warehousing
  • And more…

Features

  • Flair detection technology delivers reliable very early warning in a wide range of environments with minimal nuisance alarms.
  • Multi stage filtration and optical protection with clean air barriers ensures lifetime detection performance.
  • Four alarm levels and an ultra wide sensitivity range deliver optimum protection for the widest range of applications.
  • Intuitive LCD icon display provides instant status information for immediate response.
  • Flow fault thresholds per port accommodate varying airflow conditions.
  • Smart on-board filter retains dust count and remaining filter life for predictable maintenance.
  • Extensive event log (20,000 events) for event analysis and system diagnostics.
  • AutoLearnTM smoke and flow for reliable and rapid commissioning.
  • Referencing to accommodate external environmental conditions to minimise nuisance alarms.
  • Backward compatible with VLP and VESDAnet.
  • Remote monitoring with iVESDA for system review and proactive maintenance.
  • Ethernet for connectivity with Xtralis software for configuration, secondary monitoring and maintenance.
  • Industry first. Aspirating detector secondary monitoring and maintenance via WiFi.
  • USB for PC configuration, and firmware upgrade using a memory stick.
  • Two programmable GPIs (1 monitored) for flexible remote control.
  • Field replaceable sub-assemblies enable faster service and maximum uptime.

Specifications

  • Supply Voltage : 18-30 VDC (24 V Nominal)
  • Power Consumption
    • VEU-A00 : 
      • Aspirator Setting : 1
        • Power (Quiescent) : 7.0 W
        • Power (In Alarm) : 7.8 W
      • Aspirator Setting : 5
        • Power (Quiescent) : 8.8 W
        • Power (In Alarm) : 9.6 W
      • Aspirator Setting : 10
        • Power (Quiescent) : 14.7 W
        • Power (In Alarm) : 15.5 W
    • VEU-A10 :
      • Aspirator Setting : 1
        • Power (Quiescent) : 8.2 W
        • Power (In Alarm) : 10.4 W
      • Aspirator Setting : 5
        • Power (Quiescent) : 10.0 W
        • Power (In Alarm) : 11.6 W
      • Aspirator Setting : 10
        • Power (Quiescent) : 15.8 W
        • Power (In Alarm) : 16.6 W
  • Dimensions (WHD) : 350 mm x 225 mm x 135 mm (13.8 in x 8.9 in x 5.3 in)
  • Weight
    • VEU-A00 : 4.83 kg (10.6 lbs)
    • VEU-A10 : 4.9 kg (10.8 lbs)
  • Operating Conditions
    • Ambient : 0°C to 39°C (32°F to 102°F)
    • Sampled Air : -20°C to 60°C (-4°F to 140°F)
    • Tested to :
      • -20°C to 55°C (-4°F to 131°F)
      • UL: -20°C to 50°C (-4°F to 122°F)
    • Humidity : 5% to 95% RH, non-condensing
  • Area Coverage : 6,500 m2 (69,965 sq.ft)
  • Min Airflow Per Pipe : 15 l/m
  • Pipe Lengths Depending On Number Of Pipes In Use
    • 1 Pipe : 160 m (524 ft)
    • 2 Pipe : 150 m (492 ft)
    • 3 Pipe : 130 m (426 ft)
    • 4 Pipe : 100 m (328 ft)
  • Maximum Pipe Lengths : Total Pipe Length (with branches): 800 m (2625 ft)
  • StaX : PSU, Auto Pipe Clean
  • No Of Holes (A/B/C) : 80/80/100
  • Computer Design Tool : ASPIRE
  • Pipe
    • Inlet: External diameter 25 mm or 1.05 in (3/4 in IPS)
    • Exhaust: External diameter 25 mm or 1.05 in (3/4 in IPS) via adaptor
  • Relays : 7 programmable relays (latching or non-latching states) Contacts rated 2 A @ 30 VDC (Resistive)
  • IP Rating : IP40
  • Cable Access : 4 x 26 mm (1.02 in) cable entries
  • Cable Termination : Screw Terminal blocks 0.2–2.5 sq mm (24–14 AWG)
  • Dynamic Range : 0.0002%/m (0.00006% obs/ft) to 20% obs/m (6.25% obs/ft)
  • Sensitivity Range : 0.001% – 20.0% obs/m (0.0003 to 6.25% obs/ft)
  • Threshold Setting Range
    • Alert : 0.001%-2.0% obs/m (0.0003%-0.625% obs/ft)
    • Action : 0.001%-2.0% obs/m (0.0003%-0.625% obs/ft)
    • Fire1 : 0.001%-2.0% obs/m (0.0003%-0.625% obs/ft)
    • Fire2 : 0.001%-20.0% obs/m (0.0003%-6.25% obs/ft)
  • Software Features
    • Event log : Up to 20,000 events
    • Smoke level, user actions, alarms and faults with time and date stamp
    • AutoLearn : Detector learns Alarm Thresholds and Flow Fault thresholds by monitoring the environment.

Downloads

Additional information

Weight 4.93 kg
Display

No, Yes

Related Products