Home Conventional Page 3
Conventional
Know what you're looking for?
Filter Products
Type
Output
Battery Charging
Maximum Batteries
Manufacturer
Apollo(23)
C-Tec(7)
Cranford Controls(5)
Eaton(9)
Fulleon(10)
Gent(5)
GST(4)
Hochiki(11)
KAC(2)
Klaxon(11)
Moyne Roberts(1)
Nittan(3)
Vimpex(10)
Zeta Alarms(15)
Ziton(1)
Technology
Resolution
Extinguisher Type
A Rating
Alarm In/Out
Anti-Fog
Audio In/Out
Auto Aligning
B Rating
Battery
Bluetooth Controller
Built-in Mic
Built-in Speaker
C Rating
Channels
Class A Holes
Class B Holes
Class C Holes
CO Testing
Codec
Colour
Black(5)
White(66)
Grey(1)
Ivory(7)
Red(37)
Red/Translucent(1)
Stainless Steel(1)
White/Translucent(1)
Yellow(1)
Detection Type
Flame(1)
Heat(16)
Multi-Sensor(6)
Smoke(12)
Device Type
Detector(30)
Bell(3)
Bell/VAD(1)
Sounder(18)
Sounder/VAD(9)
Sounder/VID(6)
VAD(4)
VID(10)
Voice Sounder(3)
Direction
Environment
Indoor(77)
Outdoor(36)
IR Range
F Rating
Face Detection
Fast Fix Base
First Aid
Hazardous Applications
No(109)
Yes(8)
Head Removal
Heat Testing
Interconnectable
Lens
Lines
Low Level Controller
Marine Applications
No(106)
Yes(11)
Material
Max HDD Capacity
Max Loops
Maximum Record Resolution
Minimum Distance
Monitor Outputs
Networkable
Optical Zoom
Photoluminescent
Pipework Diameter
PoE Ports
Power
Protocol
Range
Reach
Relay
Yes(4)
No(17)
Remote Control Test
Self-Test
Series
Short Circuit Isolator
No(32)
Yes(1)
Sign Type
Size
Smoke Testing
Stimulus Type
System Type
Touchscreen
Wireless Interlink
Warranty
Showing 101–117 of 117 results
-
Solista LX Conventional Ceiling Mounted VAD
Eaton- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
In Stock
£36.27 This product has multiple variants. The options may be chosen on the product page -
Sonos Conventional Sounder & LED Beacon
Klaxon- Low current LED beacon.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65 (deep base units).
- Choice of lens colours.
- Sounder and beacon can be controlled separately.
- Tone and volume can be preset or adjusted off-base - 20dB.
- Separate connections for sounder & beacon.
In Stock
£30.07 – £66.51 This product has multiple variants. The options may be chosen on the product page -
Sonos Conventional Sounder in Red or White
Klaxon- Wide voltage range.
- Simple ‘First Fix’ installation.
- 32 tones.
- Tone and volume can be preset or adjusted off-base.
- Weatherproof to IP65 (deep base units).
- Synchronised alarm tones.
- Volume control - 20dB.
In Stock
£14.61 – £33.52 This product has multiple variants. The options may be chosen on the product page -
Sonos High Power 5J Xenon Beacon
Klaxon- High output 5J xenon beacon.
- 10-60V DC or 110/230V AC.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65.
- Synchronised flash (DC version).
- Single/double flash (DC version).
- No surge current.
Low Stock
£34.22 This product has multiple variants. The options may be chosen on the product page -
Sonos LED Beacon
Klaxon- High efficiency LED beacon consumes less than 5mA.
- Simple ‘First Fix’ installation (no second fix wiring).
- Weatherproof to IP65 (deep base units).
- Synchronised flash.
In Stock
£20.52 – £21.78 This product has multiple variants. The options may be chosen on the product page -
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
Klaxon- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
In Stock
£45.35 – £50.63 This product has multiple variants. The options may be chosen on the product page -
Sonos Pulse Wall Mounted VAD
Klaxon- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
Low Stock
£45.35 – £46.61 This product has multiple variants. The options may be chosen on the product page -
Sonos Pulse Wall Mounted VAD Beacon with Sounder
Klaxon- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
Low Stock
£49.34 – £50.63 This product has multiple variants. The options may be chosen on the product page -
StroBell Combined Fire Alarm Bell With White LED Beacon
Vimpex- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Familiar installation method
- Low current consumption
- Single point of installation minimises wiring andassociated costs
- Strobe synchronisation with no additional wiring (synchronisation not covered by approval
- Can be wired as a two stage alarm, with both bell and visual alarm on separate circuits (not approved in this configuration)
-
Syrex Intrinsically Safe Sounder Beacon
Klaxon- Sounder Only, Beacon Only and Sounder Beacon Options Available
- Rated for Category 1
- Choice of Lens Options
- Weatherproof to IP65
In Stock
£106.30 – £241.60 This product has multiple variants. The options may be chosen on the product page -
Vimpex Identifire IDBTS Base Sounder with Cover
VimpexKey Features
- 32 Tones
- EN 54-3 tested and fully approved in accordance with CPR
- Slimmest profile in the industry
- Low current consumption
- Omni-directional sound
- Front plate for stand-alone use available
- Four selectable volume levels
- Installer friendly terminals
- Ceiling or wall mounting
- Robust and easily connected ‘two in two out’ 2.5mm terminals
-
VXB & VTB Conventional Visual Alarm Device with Optional Sounder
Cranford Controls- Approved to EN54-3(Sounder) and EN54-23(VAD Beacon).
- White flash(C-2.4-8), red flash (C-2.4-7) options available.
- 32 selectable tones.
- Body colour options available – red or white.
- Deep base variants independently certified to IP65.
In Stock
£39.52 – £47.28 This product has multiple variants. The options may be chosen on the product page -
Xtratone Conventional Combined Wall Sounder Beacon
Zeta Alarms- Complies with EN54 Part 3 Type A
- 102dB @ 1m sound output
- 22 Tone patterns (site selectable)
- Flush or surface fixing
- Housed in UL V0 flame retardant ABS
- 4 x 20mm cable entries (2 top, 2 bottom)
- First fix, wire to back box technology
- Flashing Rate 0.5Hz
Low Stock
£27.50 This product has multiple variants. The options may be chosen on the product page -
Zeta CP3 Conventional Manual Call Point
Zeta Alarms- EN54-11 approved conventional manual call point
- Surface mounted (includes back box) or flush mounted with optional bezel
- Positive activation that mimics the feel of breaking glass
- Simple key to reset operating element - no broken glass
-
Zeta CP4 Conventional Manual Call Point
Zeta Alarms- Very high visibility of the alarm condition
- High impact resistant ABS glass fiber material Fully patented
- Quick and easy installation
In Stock
£9.30 – £38.70 This product has multiple variants. The options may be chosen on the product page -
Zeta Securetone 2 Conventional Beacon
Zeta Alarms- Low consumption conventional beacon
- Low profile platform design which can be used standalone or with a detector
In Stock
£16.20 This product has multiple variants. The options may be chosen on the product page -
Ziton Z600 Series Conventional Heat Detector
Ziton- Aproved to EN54 Parts 5 and CPD Certified
- Low profile conventional design
- Head out continuity support
- Range of surface bases
- Plug in base with automatic locking
In Stock
£15.75 This product has multiple variants. The options may be chosen on the product page