Gent Indoor Conventional Manual Call Point
£8.93 – £9.19
Summary
Gent indoor conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
Features
- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
Specifications
- Weight : 180g (130g Semi- flush)
- Current Rating : 2A (switching only)
- Operating Voltage : 30VDC maximum
- Dimensions mm : Semi-flush mounted 93 x 89 x 59.5 (H x W x D)
- Operating Temperature : -10°C to +55°C
- Relative Humidity : 93+ 3% non-condensing
- Ingress Protection (IP) Rating : IP24D
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 0.18 kg |
|---|---|
| Mounting | Surface, Flush |
| Environment | |
| Element | Resettable, Glass |
| Hazardous Applications | |
| Marine Applications | |
| Short Circuit Isolator | |
| System Type |