Indoor
Know what you're looking for?
Showing 101–150 of 308 results
-
Apollo XP95 Integrated Sounder & Beacon Base with optional Isolator
ApolloAn integrated sounder base unit with additional synchronised beacon and an isolater. For use with Apollo XP95 detectors.
-
Apollo XP95 Loop Powered VAD, White Body, White Flash, Ceiling Category
Apollo- Uses high intensity LED.
- EN 54-23 Compliant Category C VAD.
- Flash rate 0.5Hz.
- Fault signal if LED check failed.
-
Apollo XP95 Loop-Powered Visual Indicator Base with Isolator
Apollo- Visual indicator flash rate of once per second
- Synchronisation of visual indicator flash
- Individual and group addressing
- Unique visual indicator self-test
- Loop-powered
- Built-in Isolator
-
Apollo XP95 Multi-tone Open Area Indoor Sounder
Apollo- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of ‘alert’ and ‘evacuate’ tones.
- Individual & group addressing.
- Three tones on standard devices; Apollo, slow whoop and DIN – all of which comply with EN54–3:2001.
-
Apollo XP95 Open-Area Sounder & Beacon, Red Body, Red Lens
Apollo- Choice of tones on standard device: Apollo, Slow Whoop and DIN.
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of 'alert' and 'evacuate' tones.
-
Apollo XP95 VAD Base with Isolator
ApolloKey Features
- EN 54-23 Certified Category O VAD
- 0.5Hz Flash Rate (white)
- Synchronisation of VAD flash
- Individual & group addressing
- Unique VAD self-test
- Loop-powered
- Built-in isolator
-
Askari Flange Sounder in Red or White
Fulleon- Easily fitted within or on control cabinets.
- Easily fitted to most surfaces.
- Can be used in exposed locations.
-
Azelio Surface LED Emergency Downlight With Both Open Area & Escape Route Lenses
Channel Safety Systems- Suitable for both Open Area & Escape Routes.
- Excellent luminaire spacings of up to 15m for corridor version.
- Remote-control testing option.
-
-
Banshee Excel Flashdome LED Beacon With Optional IP66 Base
Vimpex- Ultra-efficient LEDs.
- Very low current consumption.
- Sleek, low-profile design.
- Compatible with other Excel Sounders and Sounder Beacons and accessories.
- Uses same bases as Banshee - simple push and twist bayonet mounting with locking screw.
-
Banshee Excel Lite CHL IP66 Sounder & LED Beacon
Vimpex- IP66 or weathproof rated (Deep Base option only)
- Very low consumption conventional sounder/flasher
- Easy to install
- Choice of 3 volume levels
-
Infinity ID2 Manual Call Point
Zeta Alarms- Manual call point for the Infinity ID2 system
- Indoor or outdoor (IP67) version available
- Visible warning flag confirms activation
-
Zeta ZP4 Addressable Manual Call Point
Zeta Alarms- Indoor call point compatible with Zeta addressable panels
- Supplied with backbox for surface mount installations (optional flush mount bezel available)
- Very high visibility of the alarm condition
-
Fyreye MKII Sandwich Sounder & Flasher Base
Zeta Alarms- Plug & play (no wiring, just fit to base)
- Multiple programmable tones
-
Xtratone MKII Addressable Sounder in Red or White
Zeta Alarms- Indoor MKII addressable sounder compatable with Zeta control panels.
- 102dB @ 1m sound output.
- Available in Red or White.
-
Xtratone MKII Addressable Combined Sounder & Beacon in Red or White
Zeta Alarms- Indoor MKII addressable combined sounder & beacon compatable with Zeta control panels.
- 102dB @ 1m sound output.
- Flush or surface fixing.
-
C-Tec ActiV 96dB Conventional Base Sounder
C-Tec- Third-party certified to EN54-3 (Sounders)
- Impressive 96dB(A) sound output @ 1m
- 31 selectable primary and secondary tone pairs and two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA
- Alarm Current at 18Vdc = 3.8mA
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
-
C-Tec ActiV Conventional Base Sounder VAD (C-3-8.5)
C-Tec- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs)
- Provides 'C-3-8.5' light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area)
- Impressive 96dB(A) sound output @ 1m
- Includes 31 selectable primary tones and an optional secondary tone
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
-
C-Tec BF431A/CX/W Addressable XP95 Compatible 96dB Base Sounder
C-Tec- Impressive 96dB(A) sound output @ 1m.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- Onboard short-circuit loop isolator.
-
CAST Optical Smoke Detector
C-Tec- A high-quality smoke detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels
- Smart algorithms help reduce false alarms
- Onboard short circuit loop isolator
-
CAST CA402 Programmable Heat Detector
C-Tec- A high quality programmable heat detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector
- Onboard short circuit loop isolator
-
CAST CA414 Programmable Multi-Sensor Fire Detector
C-Tec- A high-quality programmable multi-sensor detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels
- Onboard programmable heat & smoke sensors make it deal for detecting a wide range of fires whilst also reducing false alarms
- Multiple sensitivity/sensor settings
-
CAST Sounder Base
C-Tec- Impressive 92dB(A) sound output at 1m
- Onboard short-circuit loop isolator
- 4 selectable volume levels and 31 selectable tones
-
CAST Voice Sounder Base
C-Tec- Superb sound intelligibility
- Onboard short-circuit loop isolator
- Four selectable volume levels
-
CAST C Class VAD Base
C-Tec- C-3-8 rated light distribution for effective coverage
- Onboard short-circuit loop isolator
- 7mA typical alarm current at 27-40V DC
-
CAST Sounder & C Class VAD Base
C-Tec- 92dB(A) sound output at 1m
- Onboard short-circuit loop isolator
- C-3-8 rated light distribution for effective coverage
-
CAST Compact Wall Sounder
C-Tec- LPCB certified to EN54-3 & 17
- Impressive 96dB(A) sound output
- Onboard short-circuit loop isolator
-
CAST Wall Sounder & White VAD
C-Tec- LPCB certified to EN54-3, 17 & 23
- Impressive 103dB(A) sound output
- Onboard short-circuit loop isolator
-
CAST Wall Voice Sounder & White VAD
C-Tec- Superb sound intelligibility
- Onboard short-circuit loop isolator
- Four selectable volume levels
-
CAST Wall Sounder
C-Tec- Impressive 100dB(A) sound output at 1m
- Onboard short-circuit loop isolator
- 4 selectable volume levels and 31 selectable tones
-
CAST Wall Voice Sounder
C-Tec- Superb sound intelligibility
- Onboard short-circuit loop isolator
- Four selectable volume levels
-
CAST O Class VAD Base
C-Tec- O-R-3-2.5-18 rated light distribution for corridor coverage
- Onboard short-circuit loop isolator
- 7mA typical alarm current at 27-40V DC
-
CAST Sounder & O Class VAD Base
C-Tec- 92dB(A) sound output at 1m
- Onboard short-circuit loop isolator
- O-R-3-2.5-18 rated light distribution for corridor coverage
-
C-Tec Hi-Output XP95 Wall Sounder
C-TecKey Features
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
- Impressive 103dB(A) sound output @ 1m
- Onboard short-circuit loop isolator
- 550µA quiescent current./li>
- 5mA alarm current @24V DC (sounder on max)
- Group addressing facility allows multiple devices to be operated simultaneously
- 7 selectable volume levels and up to 15 selectable tone pairs
- IP21C (Type A) rated.
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
-
C-TEC Surface Mounting No Break Fire Call Point
C-Tec- Cable termination: 5-2.5mm 2
- Maximum voltage: 30Vd.c
- Current rating: 2 Amps
- IP rating: IP24D
- Material: PC/ABS
- Weight: 160g
- Dimensions: 89x93x59mm
- Colour: Red
-
CCP-E-IS Conventional Manual Call Point
Hochiki- Supports Either Frangible Glass Element Or Non Frangible Plastic Element
- Terminals Can Accommodate Up to 2.5mm² Solid Conductor
- Approved EN54.12
- Rugged Design
- ICECx Certification
-
Ceilo 5W LED Emergecy Downlight (Maintained or Non-Maintained) – Self-Test or DALI Version
Channel Safety Systems- Recessed LED emergency downlight
- Long life LED technology
- Maintained or non-maintained operation
- Simple installation
- Self-test and DALI versions available
- Self-test verion facilitates auto monthly and annual self test function
- Meets BS EN 60598-2-22 and other relevant standards
-
ClamBell EN54-3 Approved Fire Alarm Bell
Vimpex- Permanently fitted gong.
- Specifically designed weatherproof back box.
- Slick and modern looking.
- Fully customised pad printed branding.
- Strobell EN-23 VAD option which integrates ClamBell and VAD for unique combined unit will be available soon.
-
Conventional Symphoni LX Wall Sounder Beacons
Eaton- Ultra low current consumption.
- Up to 7.5m coverage volume (switchable to 2.5m).
- Coverage switch to 2.5m.
- Available as weatherproof (IP66) version.
-
Eaton FXN922 Selectable Multi-Mode Conventional Detector
Eaton- 5 modes in 1 detector
- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
-
Cooper Intelligent Addressable Sounder Base
Eaton- Integral short circuit isolator
- Integral sensor mounting base
- Can be used with a sensor as a sounder base or stand-alone as a sounder
- Cover plate (optional)
- Quick and simple to install
- Integral short circuit isolator
- First fix base
- Selectable tones controlled by the panel
- Adjustable volume controlled by the panel
- Single point connection for sensor and sounder (saving on both time and installation costs)
- Can be used with a sensor or stand alone
- Easy to maintain/service
-
CQR DP3 Grade 3 Double Push Hold Up Device
CQR- Versatile security device suitable for Grade 3 installations
- Latching/non-latching options with selectable open/closed settings
- Key resettable functionality for added convenience
-
CQR EPA-NG Grade 3 Electronic Hold Up Device
CQR- Single relay output for efficient functionality
- Two-button operation for ease of use
- LED indicator for clear status indication
-
CQR FC508 Grade 2 Flush Magnetic Contact
CQR- Reliable Grade 2 magnetic contact for commercial and residential use
- Microswitch tamper for added security
- Operates with a 23mm gap to ensure effective protection
-
CQR FC508 Grade 3 Flush Magnetic Contact
CQR- Screw terminal block for easy connectivity
- Microswitch tamper for added security
- Selectable end-of-line resistor for flexibility in installation
-
CQR JB707 5 Way Junction Box with Microswitch Tamper
CQR- Five screw terminals for easy connections
- Two tamper options for enhanced security
- Compact size of 80 x 25 x 20mm for versatile installation opportunities
-
CQR JB737 24 Way Junction Box with Microswitch Tamper
CQR- Features 24 way screw terminals for extensive connectivity options
- Includes a microswitch tamper for immediate alert on unauthorised access
- Available in white or brown to suit different installation environments
-
CQR Piccolo Sounder with Red or Blue Lens
CQR- Low profile design for discreet installation
- ≈112dB(A) sound output for effective alerts
- Selectable alternating or continuous tone for flexibility
-
CQR RS002 Heavy Duty Roller Shutter Magnetic Contact
CQR- High-quality alloy finish for durability
- Double pole configuration for enhanced security
- Meets EN50131-2-6 Grade 2 standards for reliability
-
CQR RS007 Heavy Duty Roller Shutter Magnetic Contact
CQR- High-quality alloy finish for durability
- Selectable resistors for versatile compatibility
- Meets EN50131 Grade 2 and Grade 3 standards for reliable security assurance