Indoor
Know what you're looking for?
Showing 251–300 of 308 results
-
Hochiki ESP Device Address Programmer
Hochiki- Recently been restyled to provide a more rugged yet light enclosure.
- Handheld programming tool for Hochiki ESP devices.
- Lightweight design.
- Battery operated with a capacity of 8,000 operations.
-
Hochiki ESP Dual Sounder Controller with SCI with DIN Rail Option
Hochiki- Single Loop Address
- Two Independant Sounder Circuits
- DIN Rail Version Available
- Auxillary Monitored Input
-
Hochiki ESP Dual Zone Monitor with SCI With DIN Rail Option
Hochiki- Single Loop Address
- Requires an Aux 24V Supply
- DIN Rail Version Available
- Intrinsically Safe Version Available
-
Hochiki ESP Mains Relay Controller With SCI With DIN Rail Option
Hochiki- Loop Powered
- Single Loop Address
- DIN Rail Option
- Aux Monitored Input
-
Hochiki ESP Powered Output Module
Hochiki- 24V Supply at Various Currents
- User Selectable Output
- Two Monitored Inputs
- Colour Coded Flying leads for easy installation
-
Hochiki ESP Single Input Module
Hochiki- Single Monitored Input
- Small Design
- Flying Leads for Easy Installation
- Approved by LPCB & VdS
-
Hochiki ESP Single Zone Monitor with SCI with DIN Option
Hochiki- Loop Powered
- Single Loop Address
- Remote LED Output
- DIN Rail Version Available
-
Hochiki Sav-Wire Manual Call Point
Hochiki- Designed for use on “Savwire” (two-wire) systems
- Approved to EN54-11:2001
- Terminals can accommodate up to a 2.5 mm² solid conductor
-
Hochiki SOC-E3N Conventional Photoelectric Smoke Sensor (Ivory or White)
Hochiki- Conventional Hochiki Photoelectric Smoke Sensor.
- Automatic Sensitivity Window Verification (ASWV) – Drift Compensation Technology.
- Easy to install.
- Backwards compatible with SLR range.
-
Hochiki YBO-BS Addressable Base Sounder (Ivory or White)
Hochiki- Loop Powered with Single Loop Address
- Variable Sound Output 50 ~ 98 dB(A) (+/-2 dB(A)) output at 1 metre
- 51 User-Selectable Tones (all tones EN54-3 compatible)
-
Hochiki YBO-BSB2 ESP Addressable Base Sounder Beacon
Hochiki- Hochiki ESP combined base sounder & VAD beacon.
- Variable Sound Output 50 ~ 98 dB(A) output at 1 metre.
- 'O' Rated Beacon to EN54-23.
- Available with Red or White LEDs.
- Available with White or Ivory case.
-
Identifire TriTone Conventional Sounder
Vimpex- Approved to EN54-3 by UL.
- 96 dB(A) output.
- 6 mA current consumption.
- Low profile and subtle design.
-
Identifire VID Conventional VID Beacon Only
Vimpex- Very bright VID beacon.
- Ideal for many general signalling applications.
- Can be grid mounted for industrial applications.
- Five different lens colours available.
-
KAC Conventional Indoor Manual Call Point
KAC- Unique ‘Plug & Play’ installation concept
- Total ‘Flex-Ability’ in the choice of operating element
-
KAC ENscape Sounder Conventional Sounder Shallow Base Only
KAC- Conventional sounder from KAC.
- Available with low profile or deep mounting base (IP65).
- 32 tones all approved to EN54-3.
-
LED Retrofit Emergency Light Replacement
Chrislec- Replacement LED retro fit emergency lighting unit
- Fits virtually any 8W emergency bulkhead (maintained or non-maintained)
- Average life of 50,000 hours
- EN60598.22 compliant
-
Menvier Surface Manual Callpoint C/W Backbox Optional Weatherproof (CX201, MBG914, FX201)
EatonKey Features
- High visibility status LED
- Standard and weatherproof versions available
- Wide range of accessories
- Heavy duty terminals
- Quick and simple to install
- Fast fit clip on front cover
- Single tool for test and access
-
Morley-IAS Addressable Manual Call Point with Optional Short Circuit Isolator
Morley-IAS- Addressable manual call point for DX Connexion panel range.
- Optional built-in short circuit isolator.
-
Nittan EVC-DP Evolution Conventional Dual Optical Detector
Nittan- Dual Optical Detector Reduces False Alarms.
- Omniview 360° LED.
- Internal Alarm Current Limiting Resistor.
- Wide Operational Voltage Range (16v-32v).
-
Nittan EVC-P Evolution Conventional Optical Detector
Nittan- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan Evolution Addressable Indoor Manual Call Point With Optional Short Circuit Isolator
Nittan- Resettable manual call point for Nittan Evolution protocol.
- IP24 rated housing, suitable for indoor applications.
- DIL switched addressed.
- Supplied with both surface backbox and flush mounting wall plate.
- Available with optional short circuit isolator.
-
Nittan Evolution Conventional Heat Detector
Nittan- 62°C or 92°C conventional heat detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan Evolution EV-AV2 Addressable Sounder Beacon or Sounder Beacon Base
Nittan- Available as Standalone Sounder Beacon or Sounder Beacon Base.
- Evolution FSK Protocol.
- EEPROM Addressed (Programmer).
- 12 Tones DIP Switch Selected (3 Approved Tones).
-
-
Nittan Evolution EV-SDR Addressable Sounder or Sounder Base
Nittan- Available as standalone sounder or sounder base
- 12 tones DIP switch selected (3 approved tones)
- Replaces EV-ABS sounder
-
Nittan Evolution High Output Sounder, Beacon or Combined
Nittan- Available as Sounder, Beacon (VAD) or Combined.
- IP65 rated.
- Evolution FSK Protocol.
- EEPROM Addressed (Programmer).
-
Orbis A1R Heat Detector
Apollo- TimeSaver Base designed for fast installation
- StartUp for fast commissioning
- FasTest reduces maintenance time
- Automatic drift compensation, with DirtAlert warning to easily identify dirty detectors
- Can be used for applications where smoke detectors are unsuitable
- Ideal in environments that are dirty or smoky under normal conditions
- Red flashing LED at StartUp confirms the device is operating
- SensAlert®, yellow flashing LED indicates faulty operation
- FasTest® takes just four seconds to test and confirm detectors are functioning correctly
- multisensor smoke detector for detecting fast-burning fires
- flashing LED option
- Warranty: 10 year
-
Orbis Marine BR Heat Detector with Flashing LED
Apollo- Approved for use in marine environments
- Modern, low-profile design
- TimeSaver® Base for fast installation
- Transient rejection for false alarm reduction
- High humidity tolerance at up to 98% RH
- Wide operating temperature -40°C to +70°C
-
Orbis Marine Heat Detector
ApolloThe Orbis Marine Heat Detector uses a single thermistor to sense the temperature around the detector. We have 6 detectors available from the Orbis Marine range designed to suit a variety of operating conditions.
-
Orbis Multisensor Detector
Apollo- Orbis conventional multisensor smoke detector.
- TimeSaver Base designed for fast installation.
- StartUp for fast commissioning.
- FasTest reduces maintenance time.
- Automatic drift compensation, with DirtAlert warning to easily identify dirty detectors.
-
Razor LED Emergency Exit Sign
Channel Safety Systems- Hanging emergnecy exit sign with versions available for Hanging, Hanging Recessed, Recessed or Wall/Ceiling Mounted
- 3 hour duration in emergency mode
- Longlife LED technology
- Push to test function (excluding wall mounted version)
- Hanging version offer adjustable heights and no visible power cable
- Meets the BS EN 60598-2-22 standard
-
Roshni Low Profile (RoLP) Conventional Fire Alarm Sounder
Fulleon- 102dB(A) sound output
- 32 tones (user selectable)
- Optional deep base
- Two stage alarm
- Automatic synchronisation
-
Solista LX – Wall Fire Visual Alarm Device (VAD)
Eaton- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Solista LX Conventional Ceiling Mounted VAD
Eaton- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Sonos Conventional Sounder & LED Beacon
Klaxon- Low current LED beacon.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65 (deep base units).
- Choice of lens colours.
- Sounder and beacon can be controlled separately.
- Tone and volume can be preset or adjusted off-base - 20dB.
- Separate connections for sounder & beacon.
-
Sonos Conventional Sounder in Red or White
Klaxon- Wide voltage range.
- Simple ‘First Fix’ installation.
- 32 tones.
- Tone and volume can be preset or adjusted off-base.
- Weatherproof to IP65 (deep base units).
- Synchronised alarm tones.
- Volume control - 20dB.
-
Sonos LED Beacon
Klaxon- High efficiency LED beacon consumes less than 5mA.
- Simple ‘First Fix’ installation (no second fix wiring).
- Weatherproof to IP65 (deep base units).
- Synchronised flash.
-
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
Klaxon- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD
Klaxon- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD Beacon with Sounder
Klaxon- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
-
StroBell Combined Fire Alarm Bell With White LED Beacon
Vimpex- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Familiar installation method
- Low current consumption
- Single point of installation minimises wiring andassociated costs
- Strobe synchronisation with no additional wiring (synchronisation not covered by approval
- Can be wired as a two stage alarm, with both bell and visual alarm on separate circuits (not approved in this configuration)
-
System Sensor Addressable Indoor Manual Call Point
System Sensor- Addressable System Sensor MCP
- Suitable for indoor applications
- Resettable element
- No short-circuit isolator
-
System Sensor BSO-PP-N00 & I00 Addressable Base Sounder with Optional Isolator
System Sensor- Addressable base sounder for System Sensor protocol.
- Available with optional short-circuit isolator.
-
System Sensor DSS-PC-N00 & I00 Addressable Base Sounder & VAD with Optional Isolator
System Sensor- High output LED technology ensures optimum light output and low power requirements.
- High efficiency piezo disk and horn profile generate powerful sound output.
- Features Advanced protocol controllable sound output, tone selection, group polling, independent sound or strobe function
- Automatic synchronization of sounder and strobe
- Large cable access
- Rear or surface cable entry
- Loop continuity spring
- Simple twist fit onto universal B501AP base (positive “poke yoke” engagement)
- Anti-tamper feature
- In-built isolation options
- Address tag for clear indication
- Single point of installation – saves time, cost & inventory
- Low current draw enables more devices on loop
- Adjustable volume control (on device or from panel)
- Rotary wheels for clear address indication
- Clear lens with red flash
-
Vale Self-Test LED Emergency Exit Sign In White, Brass or Chrome
Channel Safety Systems- Available in White, Brass or Chrome finish.
- Double sided legend, supplied as standard with arrow up only.
- Self-test operation as standard to BS EN 62034.
- Low running costs (8.5 W).
- 24 x 0.07W LEDs.
- Long life LED technology.
- Maintained or non-maintained 3 hour emergency backup (can be switched to non-maintained if required).
-
Vimpex Identifire IDBTS Base Sounder with Cover
VimpexKey Features
- 32 Tones
- EN 54-3 tested and fully approved in accordance with CPR
- Slimmest profile in the industry
- Low current consumption
- Omni-directional sound
- Front plate for stand-alone use available
- Four selectable volume levels
- Installer friendly terminals
- Ceiling or wall mounting
- Robust and easily connected ‘two in two out’ 2.5mm terminals
-
VXB & VTB Conventional Visual Alarm Device with Optional Sounder
Cranford Controls- Approved to EN54-3(Sounder) and EN54-23(VAD Beacon).
- White flash(C-2.4-8), red flash (C-2.4-7) options available.
- 32 selectable tones.
- Body colour options available – red or white.
- Deep base variants independently certified to IP65.
-
XP95 Category W EN 54-23 Visual Alarm Device with Red or White Body
Apollo- Uses high intensity LED (white flash only).
- EN 54-23 Compliant Category W. VAD.
- Coverage W-2.4-6.
- Automatic LED check when VAD activated.
-
Xtratone Conventional Combined Wall Sounder Beacon
Zeta Alarms- Complies with EN54 Part 3 Type A
- 102dB @ 1m sound output
- 22 Tone patterns (site selectable)
- Flush or surface fixing
- Housed in UL V0 flame retardant ABS
- 4 x 20mm cable entries (2 top, 2 bottom)
- First fix, wire to back box technology
- Flashing Rate 0.5Hz
-
Zeta CP3 Addressable Manual Call Point
Zeta Alarms- Available in both indoor & ourdoor (IP67) versions
- Supplied with back box for surface mounting