No
Know what you're looking for?
Showing 1–50 of 289 results
-
Nittan Evolution H2 Addressable Heat Detector with Short Circuit Isolator
Nittan- Heat category P (A1R/A2S/BS/CS)
- Integral -ve short circuit isolator
- Evolution FSK protocol
- EEPROM addressed with programmer
-
Nittan Evolution PY Addressable Optical Smoke Detector
Nittan- Replaces EV-P from September 2024
- Improvements to smoke sensing chamber
- Orange LED, which significantly improves response across the fire spectrum
- Chamber construction is also designed to minimise the effect of dirt/dust contamination
-
Nittan Evolution PY Addressable Optical Smoke Detector with Short Circuit Isolator
Nittan- Integral -ve short circuit isolator
- Improvements to smoke sensing chamber
- Orange LED, which significantly improves response across the fire spectrum
- Chamber construction is also designed to minimise the effect of dirt/dust contamination
-
Nittan Evolution PYH Addressable Optical & Heat Multi-Sensor Detector
Nittan- Replaces EV-PH from September 2024
- Orange optic LED and PY type Chamber
- 3 sensitivity settings
- Heat category A1R
-
Nittan Evolution PYH Addressable Optical & Heat Multi-Sensor Detector with Short Circuit Isolator
Nittan- Orange optic LED and PY type chamber
- 5 sensitivity settings
- Heat category P (A1R/A2S/BS/CS)
- Integral -ve short circuit isolator
-
Fire-Cryer Solo Voice Base Sounder with Single Fixed Message
Vimpex- No special wiring, easily retro-fitted
- Fully synchronised
- Uses rocking armature technology for highly intelligible speech
-
-
System Sensor 10-70m Reflective Optical Beam Smoke Detector
System Sensor- Unique servo-operated test filter
- Combined transmitter and receiver unit
- Range 10 – 70 meters, 70-100 meters with long range kit
- 4 x fixed sensitivity/threshold levels
-
System Sensor Addressable Waterproof Call Point with Isolator
System Sensor- Sealed to IP67
- Integral short circuit isolator
- Unique ‘Plug & Play’ installation concept
-
ActiV Conventional Heat Smoke Detector
C-Tec- Third-party certified to EN54-5 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
- Wide 6-33V DC operating voltage
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility
- Sophisticated onboard detection algorithms help reduce false alarms by rejecting momentary abnormal readings
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases (all bases include an integrated detector/base locking mechanism and ID tag)
- Class A2 fixed heat, class B fixed heat, optical and multi-sensor variants also available
-
ActiV Conventional Multi-Sensor Fire Detector
C-Tec- A high-quality combined optical + heat multi-sensor offering outstanding detection performance at a very competitive price
- Third-party certified to EN54-5 & 7 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
- Wide 6-33V DC operating voltage
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility
- Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases (all bases include an integrated detector/base locking mechanism and ID tag)
- Class A1 fixed heat, class B fixed heat, class A1R rate-of-rise and optical variants also available
-
ActiV Conventional Optical Smoke Detector
C-Tec- A high-quality optical smoke detector offering outstanding detection performance at a very competitive price.
- Manufactured by C-TEC in the UK.
- Third-party certified to EN54-7 by Intertek.
- Wide 6-33V DC operating voltage.
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
- Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels allowing a greater than 8 year life-span.
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.
-
ActiV Mounting Base
C-Tec- Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors
- Easy to fit with lots of working space
- Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors
- Integrated detector/base locking mechanism, head removal tool and ID tag
- Simple ‘click and twist’ design
- Remote LED terminals for the optional connection to a BF318 Remote indicator
- Bright tin plated steel terminals can accept fire rated cable of up to 2.5mm in diameter
- C4408D diode and C4408 non-diode bases available*
- Compatible with C-TEC’s entire range of ActiV conventional smoke and heat detectors
-
Agrippa Acoustic Digital Pillow Alarm
Geofire- No installation.
- Portable device.
- Listen and learn technology.
- Flashing red LED visual warning.
-
Agrippa Deaf Alert Home Pillow Fire Alarm
Geofire- Easy to install and set up.
- Fail-safe dual power supply.
- Smoke alarm included.
- Vibrating pad to alert the deaf, hard of hearing, children, heavy sleepers or people on medication in the event of a fire.
-
Apollo 55000-274 XP95 Multi-Tone Weatherproof Open-Area Sounder
Apollo- Updated to include choice of tones: Apollo, slow whoop and DIN.
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of tones.
- Individual and group addressing.
- Loop Powered.
- IP66 rated.
-
Apollo 58000-305 Discovery CO & Heat Multisensor Detector
Apollo- Responds to smouldering and flaming fires.
- Less susceptible to false alarms caused by steam and dust.
- Five response modes.
- Remote test feature.
-
Apollo Addressable Weatherproof Manual Call Point with Optional Isolator
Apollo- IP67 rated (suitable for installation outside)
- Compatible with XP95 or Discovery systems
- EN54-11 approved
- Optional version with isolator available
- E-Z fit connectors
-
Apollo AlarmSense Manual Call Point
Apollo- Resettable operating element.
- Easy access, front reset mechanism.
- Suitable for semi-flush or surface mounting.
-
Apollo Discovery 58000-005 Open-Area Combined Sounder & VID
Apollo- 15 tone pairs.
- Individual control of the sounder and visual indicator.
- Volume and tone settings can be selected from the control panel.
- Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc.
- Soft start option, ideal for hospitals and nursing homes.
- Group and global control for increased response time.
-
Apollo Discovery 58000-300 Carbon Monoxide Detector
Apollo- Early warnign of carbon based smouldering fires.
- Resistance to false alarms in areas with high levels of steam and other airborne particles.
- Ideal for protecting small volume sleeping risk areas.
- Resitance to contamination in dirty and dusty conditions.
- Excellent supplement to fire detection systems to improve detection of smouldering hydrocarbon fires.
-
Apollo Discovery Heat Detector
Apollo- Ideal in environments that are dirty or smoky under normal conditions
- Well-suited to warehouses, loading bays and car parks
- Unaffected by wind or atmospheric pressure
- Five response modes
- Remote test feature
-
Apollo Discovery Manual Call Point with Isolator
Apollo- Plug and Play’ terminal connections for fast wiring
- Continuity link for wiring test before commissioning
- Reports an alarm in under 0.2 seconds
- Resettable element
-
Apollo Discovery Marine Heat Detector
Apollo- Approved for use in the marine environment
- Five response modes for environmental adaptation
- Day/night switching for increased flexibility
- Drift compensation for false alarm reduction
- User programmability for data
- XPERT card addressing for increased security
- Ideal in environments that are dirty or smoky
- Unaffected by wind or atmospheric pressure
- Remote test feature
-
Apollo Discovery Marine Multisensor Detector
Apollo- Ideal for a wide range of applications.
- Enhanced false alarm management.
- Unaffected by wind or atmospheric pressure.
- Well suited to sensitive environments.
- Five EN54 approved response modes.
- Heat only and optical only options.
- Remote test feature.
-
Apollo Discovery Marine Optical Smoke Detector
Apollo- Responds well to slow-burning, smouldering fires
- Suitable for bedrooms and escape routes
- Unaffected by wind or atmospheric pressure
- Remote test feature
- Rejection of transient signals
-
Apollo Discovery Multisensor Detector
ApolloKey Features
- Ideal for a wide range of applications
- Enhanced false alarm management
- Recommended, in specific modes, for hotel bedrooms and hospital wards
- Unaffected by wind or atmospheric pressure
- Well-suited to sensitive environments
- Five EN 54 approved response modes
- Heat only and optical only options
- Remote test feature
-
Apollo Discovery Optical Smoke Detector
ApolloKey Features
- Responds well to slow-burning smouldering fires
- Well suited for bedrooms and escape routes
- Unaffected by wind or atmospheric pressure
- Five response modes
- Remote test feature
-
Apollo Discovery Sounder & VAD Base, White Flash, Open Category, Isolator
Apollo- EN54-23 category 'O' VAD beacon (white flash).
- Two-tone EN54-3 sounder.
- Multiple selectable volume.
- Works on XP95, Discovery & CoreProtocol.
-
Apollo Discovery Weatherproof Manual Call Point, Isolator, KAC Style
Apollo- Suitable for weatherproof applications.
- Discovery & XP95 compatible.
- KAC style enclosure.
-
Apollo Intelligent Manual Call Point (Red)
Apollo- Resettable operating element
- Easy access, front reset mechanism
- E-Z fit connector system for installation
- Ergonomic reset key
- EN 54-11 & EN 54-17 Certified (Red version only)
- 170° viewable LED
- Continuity link for cable insulation testing
- Suitable for semi flush or surface mounting
-
Apollo Loop Powered Beacon
ApolloKey Features
- High intensity LEDs
- More reliable than xenon visual indicators
- Automatic LED check
- Lockable
- Wide angle of visibility
- Enables DDA compliance
- Synchronised flash
- Can be used with Discovery or XP95
-
Apollo Orbis Conventional Optical Smoke Detector
Apollo- Orbis Optical Smoke Detector
- Responds well to slow-burning, smouldering fires
- Good performance in both black and white smoke
- Transient rejection algorithms reduce false alarms
- Automatic drift compensation with DirtAlert, a yellow flashing LED, to easily identify dirty detectors
- Red flashing LED at StartUp confirms that the device is operating.
- SensAlert, yellow flashing LED, indicates faulty operation
- FasTest takes just 4 seconds to test and confirm detectors are functioning correctly
- FasTest® takes just four seconds to test and confirm detectors are functioning correctly
- DustDefy system prevents dust ingress while maintaining airflow
-
Apollo Orbis Timesaver Detector Base With Diode
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Continuity link for voltage testing of zone wiring prior to commissioning
- Other devices continue to work during unauthorised removal of detectors
-
Apollo Orbis TimeSaver Sav-Wire Base
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Is used in 'Sav-Wire' systems
-
Apollo SC2900-001 Conventional Manual Call Point
Apollo- Resettable operating element.
- Easy access, front reset mechanism.
- Ergonomic reset key.
- EN54-11 certified.
- 170° viewable LED.
- Suitable for flush or surface mouting.
- Optional hinged cover.
-
Apollo Series 65 12V DC Relay Base
Apollo- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
- Can be used in fire and security systems
-
Apollo Series 65 Conventional Heat Detector
Apollo- Series 65 conventional heat detector.
- Choice of 4 heat classes.
- Ideal for environments that are dirty or smoky under normal circumstances.
-
Apollo Series 65 Diode Base
Apollo- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 End-of-Line Relay Base
Apollo- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
Apollo Series 65 Optical Smoke Detector
ApolloThe Apollo Series 65 Optical Smoke Detector has a external LED for easy identification. 3 consecutive optical smoke detector sensor activations are required to trigger an alarm state. -
Apollo Series 65 Sav-wire Base
Apollo- Allows Series 65 conventional detection to work on Sav-Wire panels
- Detector locking mechanism
- Contains an earth connector
- Easy to wire
-
Apollo Series 65 Standard Base
Apollo- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 Standard Relay Base
Apollo- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
Apollo Weatherproof Multi-Tone Open-Area Sounder Visual Indicator with Isolator (Red)
Apollo- Choice of tones on standard device: Apollo, Slow Whoop, and DIN.
- IP66 rated.
- Two Volume settings 92dB(A) and 100dB(A).
- Synchronisation of 'alert' and 'evacuate' tones.
- Individual and group addressing.
- Built in isolator.
-
Apollo XP95 Addressable Call Point with Isolator
Apollo- EN54-11 Approved (EN54-17 Approved for Isolator version)
- E-Z fit connectors
- Front facing addressing without the need to detach the backbox
- A unique, ergonomically designed key for resetting and front cover removal
- Backward compatibility and retro-fit
- Resettable element
-
Apollo XP95 Addressable VAD Sounder Base
Apollo- EN54-23 Approved VAD
- Two volume ranges 55-75dB(A) and 75-91dB(A)
- Visual indicator flash rate of once per second
- Synchronisation of 'alert' and 'evacuate' tones
- Synchronisation of visual indicator flash
- Individual and group addressing
- Unique acoustic and visual indicator self-test
- Built-in Isolator
-
Apollo XP95 Ancillary Base Sounder
Apollo- For use on an XP95/Discovery systems.
- Sound output of 85dB(A) at 1 metre.
- Current consumption of only 3mA.
- Loop-powered.
- Responds to signals from the associated detector – does not have an address of its own.
-
Apollo XP95 Heat Detector
Apollo- Ideal in environments that are dirty or smoky under normal conditions
- Well-suited to warehouses, loading bays and car parks
- Unaffected by wind or atmospheric pressure
-
Apollo XP95 High Temperature Heat Detector
Apollo- Ideal in environments that are dirty or smoky under natural conditions
- Well suited for warehouses, loading bays and car-parks
- Unaffected by wind or atmospheric pressure