SmartConnect Multi-Loop, 6 Module Addressable Panel
£918.75 (inc VAT: £1,102.50)
Summary
The SMART6 Multi-loop is a powerful and sophisticated Analogue Addressable Fire Alarm Control Panel that offers a variety of modular components which allow it to meet a wide variety of applications.
The graphical touch screen provides a clear, uncluttered and intuitive interface which results in the end user requiring minimal training.
The control panel has the capability to support complex cause and effect programming and a wide range of user controllable functions that make the panel suitable for a vast range of projects from multi-site commercial developments through to industrial applications.
It can operate as part of a networked system of up to 64 panel’s peer-to-peer, or a standalone panel. It has powerful programming options that allow configurable control over whether messages from specific panels are transmitted around the network or remain local.
Each system component has been specifically designed to operate as part of a Smart Multi-loop EN54 listed system providing assurance that the detectors, interfaces, sounders, and panel are all fully compatible with each other and that the full range of system functionality is supported by all devices.
Features
- Modular construction allows a panel to be specified using just the required modules.
- Up to 4 loop card modules.
- 4.3” colour touch screen display.
- Capacity for up to 6 intelligent modules
- Full system redundancy
- Connection to TCP/IP Module.
- Extensive Day/Night mode programming.
- Full cause and effect programming via front panel or the Smart configurator PC software.
- 8032 event log entries.
- using multiple zone monitor modules, the panel can be configured into a fully functioning conventional panel.
- 250 Fyreye MKII devices per loop
- 254 Addressable programmable zones
- Up to 64 panel peer-to-peer network.
- Positive Alarm Sequence.
- Alarm Verification
- Day/night (Building occupied/unoccupied) programming.
- Alarm circuit special application 24V mode.
- 400W Power Supply.
Video
Specifications
- Description: Intelligent Addressable Control Panel
- Standard: EN54-2 & EN54-4
- Mains AC Supply Voltage: 230V AC (+10% / -15%) / 120V AC (+10% / -15%)
- Mains AC Supply Frequency: 47-63 Hz
- Power Supply DC Rating: 30V DC, 400W
- Battery Voltage: 24VDC
- Battery Charge Current: 1.1A (max)
- Battery Capacity: 2 x 12Ah, 12VDC sealed lead acid (max)
- Alarm: (C,NO,NC) Contact rating: 125VAC @ 0.5A / 30VDC @ 1A
- Fault: Normally Energised (C,NO,NC) Contact rating: 125VAC @ 0.5A / 30VDC @ 1A
- Network: Maximum Network Size 64 Nodes
- Maximum Distance Between Nodes: 1KM
- Maximum Software Zones: 254 Zones
- Maximum Event Log: 8032 Events
- Software Programming: Touchscreen LCD or Smart Configurator PC software
- LCD: 4.3” Resistive touch screen. 480 x 272 pixel resolution
- LED Indicators: 1 Red (1 x Alarm), 1 Green (Power), 10 Yellow (1 x Sounder Active, 1 x Sounder Fault, 1 x Fault, 1 x Relay Delay, 1 x Controls Active, 1 x General Disablement, 1 x General Test, 1 x Sounder Disablement, 1 x Sounder Delay, 1 x System Fault).
- Button Controls: Stop Sounders, Silence Buzzer, Scroll Display, Reset, Start Sounders
- Dimensions H x W x D (mm): 535mm x 385mm x 150mm
- Weight: 9KG
- Cable Entries: 34
- Max Module Capacity: 6
- Operating Temperature: -5°C (23°F) to 49°C (120°F)
- Relative Humidity: 93% Non-Condensing
Downloads
- Datasheet (Adobe PDF)
- Installation Manual (Adobe PDF)
- Operational & Maintenance Manual (Adobe PDF)
- User Manual, Maintenance Guide & Log Book (Adobe PDF)
- Addressable Configuration (Adobe PDF)
- Conventional Configuration (Adobe PDF)
- Addressable System Layout (Adobe PDF)
Additional information
Weight | 9 kg |
---|---|
Max Loops | |
Protocol | |
System Type | |
Touchscreen |
Related Products
-
SmartConnect Mulit-Loop RS232 Printer Module
Zeta Alarms- Designed to EN54 requirements
- Use to interface to RS232 devices
- 5V aux output (ofr use with panel printer only)
- Extensive front unit indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
-
SmartConnect Multi-Loop 6 Way Conventional Zone Monitor
Zeta Alarms- Designed to EN54 Part 2
- 6 x Conventional Zones
- Each zone is monitored for open & short circuit
- Extensive front unit status indications (see table below)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Each zone input can be configured as either Alarm or Technical Alarm
-
SmartConnect Multi-Loop Card Module
Zeta Alarms- Designed to EN54 requirements
- Supports up to 250 addresses
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit status indications
- Time saving AUTO-LEARN facility
- 450mA max load (at 20 ohms loop resistance)
- Double address detection
-
SmartConnect Multi-Loop RS485 Network Module
Zeta Alarms- Designed to EN54 requirements
- Peer-to-peer networking
- Comprehensive cross network cause & effects
- Remote programming over the network
- The network can be configured with either a ring or bus topology
- Extensive front unit status indications (See datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (Cable supplied with unit)
-
SmartConnect Multi-Loop Alarm Circuit Module
Zeta Alarms- Can be configured as an alarm output or a power output
- 2 x output circuit (500mA each)
- Extensive front unit status indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Power limited
-
SmartConnect Multi-Loop TCP/IP Module
Zeta Alarms- Designed to EN54 requirements
- TCP-IP output via RJ45
- Zeta Remote monitoring via a desktop PC or smartphone via the cloud
- Remote control via the cloud
- Responsive web interface
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit indications
- Quick and simple to install
-
SmartConnect Multi-Loop Gas Detection Module
Zeta Alarms- Each SCM-4-20 module has 2 available circuits
- Each circuit will allow a single connection of a 4-20mA device
- Extensive front unit status indications
- Compatible with any Smart Connect Multiloop Panel
- Quick Connect Din Rail Mount
-
SmartConnect Multi-Loop Multi-Input Module
Zeta Alarms- Designed to EN54 Part 2
- Each input is monitored for open & short circuits
- Extensive front unit status indications (See Datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
- Each input can be configured as either Alarm or Supervisory
-
SmartConnect Multi-Loop Repeater
Zeta Alarms- 4.3” colour touch screen display
- 8032 event log entries
- Up to 64 panel peer-to-peer network
- 13 status LED indicators
- 5 function button controls
- Fully functioning repeater provides the ability to program a networked Smart Multi-loop control panel from the front screen
- Accommodates wiring lengths up to 1000 metres from the control panel for added design and install flexibility
- Network can we wired in either a bus or a ring topology if a redundant path is required
- 8 password protected access accounts available (1 admin level, 7 user level)
- Uncluttered and intuitive interface allows alarms, tech alarms, and fault events to be easily viewed
- Low power consumption
- Small enclosure
-
SmartConnect Multi-Loop Multi-Relay Output Module
Zeta Alarms- Designed to EN54 Part 2
- 3 x Form C relay outputs
- Each relay can be programmed to activate on Alarm, Technical Alarm, or Fault.
- Extensive front unit indications (see datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)