Shop
This is where you can browse products in this store.
Know what you're looking for?
Filter Products
Showing 1451–1500 of 2241 results
-
KAC Conventional Indoor Manual Call Point
KAC- Unique ‘Plug & Play’ installation concept
- Total ‘Flex-Ability’ in the choice of operating element
In Stock
£8.45 This product has multiple variants. The options may be chosen on the product page -
KAC ENscape Sounder Conventional Sounder Shallow Base Only
KAC- Conventional sounder from KAC.
- Available with low profile or deep mounting base (IP65).
- 32 tones all approved to EN54-3.
In Stock
£21.36 This product has multiple variants. The options may be chosen on the product page -
KAC Green Door Release Manual Call Point
KAC- Green Emergency Exit Call Point
- Quick Installation Time
- Normally open and Normally Closed Contact
- Simple, effective Design
-
KAC Indoor Single Pole Keyswitch
KAC- Indoor keyswitch with single pole relay.
- Option of 2 or 3 position keyswitch.
- Option for key to be trapper or un-trapped.
In Stock
£29.16 This product has multiple variants. The options may be chosen on the product page -
KAC Plastic Resettable Element For Call Points
KAC- Compatible with the New Type KAC Call Points (See related products)
- Enables the call point to be reset after alarm is activated
- Yellow indicator on plastic element indicates to user that the call point has been activated.
-
KAC SC087 Spare Keys for 3 Position Keyswitch, Pack of 6
KAC- Replacment keys for KAC 3 position keyswitches.
- Sold in packs of 6.
-
KAC Spare Call Point Glass, Pack of 5
KACKey Features
- This glass is suitable for use in the following type Call Points:
- KAC
- Apollo
- Morely
- Fulleon
- Ziton
- Notifier
- Electro Detectors
- EMS
- System Sensor
- Nittan
- Dimensions (HxWxD): 40mm x 71mm x 1.5mm
-
KAC Weatherproof Green Door Release Manual Call Point
KAC- Sealed to IP67.
- Unique ‘Plug & Play’ installation concept.
- Total ‘Flex-Ability’ in the choice of operating element.
- Anti-Tamper facility.
- Enhanced aesthetics and compact design.
-
Keep Locked Shut Sign
Safety SignsMandatory signs are to advise and inform visitors and staff in what they must do insure a safer environment for themselves and others around them.
In Stock
£0.79 – £1.39 This product has multiple variants. The options may be chosen on the product page -
Kentec Addressable Matrix Mimic Panel For Syncro AS or Taktis
Kentec- Up to 504 LED’s can be controlled from any Taktis Fire or Syncro AS panel.
- Full colour printing.
- Available in a range of standard enclosures to suit any applications.
- Bespoke sized units can be made upon request.
- Choice of Red, Green or Yellow LED’s.
- Available with or without controls.
Low Stock
£724.52 – £2,442.69 This product has multiple variants. The options may be chosen on the product page -
Kentec and Hochiki Conventional 2, 4, or 8 Zone Fire Alarm Kit
Various- Premium Conventional Fire Alarm Kit
- 6 Total Detectors and Bases
- 2 Manual Call Points
- 2 Wall Sounders
- Premium Look and Design
Low Stock
£327.20 – £362.50 This product has multiple variants. The options may be chosen on the product page -
Kentec B1828 Replacement 2 Position Controls Enabled Keyswitch
Kentec- Kentec 2 position controls enabled keyswitch.
- Replacment for Syncro and Sigma range of panels.
-
Kentec Battery Box – Sigma CP/Syncro AS Styling
KentecKey Features
- Fully welded, all steel construction
- Tough epoxy powder coated finish
- Key lockable
- Wide range of styles and sizes
- Up to 65Ah batteries can be fitted
- Fully enclosed and robust construction
In Stock
£76.41 – £147.98 This product has multiple variants. The options may be chosen on the product page -
Kentec Boxed Sigma XT Ancillary PCB 0.75 A PSU: Surface
Kentec- Two-wire serial connection
- Up to 7 per system
- 230V AC or 24V DC powered versions
- Volt free relay outputs for fire and extinguishing system status
- Relay operated LED indicators
-
Kentec Boxed Sigma XT Ancillary PCB Boxed: Surface
Kentec- Two-wire serial connection
- Up to 7 per system
- 230V AC or 24V DC powered versions
- Volt free relay outputs for fire and extinguishing system status
- Relay operated LED indicators
-
Kentec Conventional Fire Alarm Panel Door Lock Assembly Including Key
KentecKey Features
- Replacement / spare key fand lock for Kentec and other fire alarm panels
- For use on panel part codes ending in: M1, M2, L2, H2, F2, M3, H3, D3, M4
- Stainless Steel Mini Camlock
- Replacement Barrel & Key For Kentec Panel Cabinets
- Dimensions: 8mm x 20mm
-
Kentec Conventional Panel Enable Key
KentecEnter a brief description of your product here. This description will be displayed on product list pages.
-
Kentec Economy Software Download Lead
Kentec- Software Lead for Syncro, Syncro AS, Solo, and Solex Panels
-
Kentec Extinguishant Module Including PCB and Plate
KentecEnter a brief description of your product here. This description will be displayed on product list pages.
-
Kentec Fire Alarm Documents Box
Kentec- Matches design & colour scheme for standard Sigma CP/XT and Syncro AS control panel ranges.
- Easy to install.
- Key Lockable.
- Designed for versatility.
- Choice of small or large capacity enclosure.
In Stock
£63.74 – £81.38 This product has multiple variants. The options may be chosen on the product page -
Kentec K551A Syncro Loop Controller Board : Apollo Protocol
KentecEnter a brief description of your product here. This description will be displayed on product list pages.
-
Kentec K768P2 Syncro AS Printer Enclosure
Kentec- Matches design & colour scheme for standard Sigma CP/XT & Syncro AS control panel ranges.
- Compatible with Syncro & Taktis fire panels.
- Easy to install.
- Front loading printer for quick and easy paper changes.
-
Kentec LCMU Line Continuity Monitoring Unit
Kentec- LCMU for Kentec Sigma panels.
- Easy to install.
- No additional wiring point.
-
Kentec Main / Reserve Duty Extinguishant Key Switch Unit
Kentec- Common ‘901’ keyswitch
- Key unretained
- Compatible with Sigma XT and Sigma XT+ models
- Robust steel enclosure
- Surface or single gang flush mounted
-
Kentec Sigma CP Ancillary PCB
KentecEnter a brief description of your product here. This description will be displayed on product list pages.
-
Kentec Sigma CP Conventional 2, 4 or 8 Zone Panel
Kentec- Fully certified to BS EN54-2 and BS EN54-4
- 2, 4 or 8 version zones
- Surface and Flush Mounting Options
- Installer friendly
In Stock
£204.96 – £259.16 This product has multiple variants. The options may be chosen on the product page -
Kentec Sigma CP Sav-Wire Two-Wire Fire Alarm Panel
Kentec- 1.2mm Mild Steel Construction
- Fully Certified to EN54-2
- Fully Programmable Using Simple Menu Options
- Available in 2, 4 or 8 Zones
In Stock
£231.92 – £272.80 This product has multiple variants. The options may be chosen on the product page -
Kentec Sigma CP Sounder PCB
Kentec- Two wire serial connections.
- Up to 7 sounder boards per system.
- 230V AC or 24V DC powered versions.
- Zoned, 2-stage or common alarm
- All outputs monitored for open and short circuit faults
- Individual open and short circuit fault indicators
- Fully monitored by main control panel
- Class change input facility
- Up to 8 outputs with 0.5A available from each
- Can be connected to serial bus with Ancillary boards and repeaters
- Boxed units in enclosure to match Sigma CP control panels
- Power fault input for monitoring remote power supplies
-
Kentec Sigma CP-A AlarmSense 2, 4 or 8 Zone Panel
Kentec- Apollo AlarmSense 2-wire control panel
- Available in 2, 4 or 8 zone sizes
- Available in Surface or Flush Mounting Options
- Auxillary power supply
In Stock
£215.13 – £272.80 This product has multiple variants. The options may be chosen on the product page -
Kentec Sigma CP-R Conventional 2-8 Zone Repeater Panel
Kentec- Two-Wire Serial Connection
- Up to 7 Panels Per System
- Full Control Over Main Panel
- 1.2mm Mild Steel Construction
In Stock
£139.32 – £258.23 This product has multiple variants. The options may be chosen on the product page -
Kentec Sigma XT Ancillary Card
Kentec- Two-wire serial connection
- Up to 7 per system
- 230V AC or 24V DC powered versions
- Volt free relay outputs for fire and extinguishing system status
- Serial connection to status units
- Relay operated LED indicators
-
Kentec Sigma XT+ Extinguishant Coincidence Unit 1 Area to EN12094-1 (Surface)
Kentec- Approved to EN12094-1, EN54-2 and EN54-4
- Dual extinguishant outputs
- First and second stage sounder outputs
- First and second stages relay contacts
- Serial connection to status units
- Discharge countdown time indicator
-
Kentec Sigma XT+ System Abort Button Unit
Kentec- Large mushroom head pushbutton
- Twist to release latching action
- Compatible with all Sigma XT+ models
- Robust steel surface mounted enclosure
- Flush mount collar available
-
Kentec Syncro 4 Way Conventional Detection Zone Module
Kentec- 4 Monitored Detection Zone Inputs
- 2 Monitored Sounder Outputs
- Direct Replacement for Conventional Control Panel for integration in to an addressable System
-
Kentec Syncro 6 Way Sounder Extender Board
Kentec- 6 Individually Fised and Monitored Sounder Outputs
- Fault and Operated Indications
- Common Footprint to other Syncro I/O
- Compatible with Syncro AS Panels
-
Kentec Syncro 8 Way Extender Board
Kentec- 8 Volt Free Changeover Relay Contacts
- Common Footprint to Other Syncro I/O
- Compatible with Syncro AS Panels
-
Kentec Syncro AS 1 or 2 Loop Analogue Addressable Panel With 16 Zonal LEDs
Kentec- 16 Zonal LED Indicators
- Available in 1 or 2 Loops
- Apollo, Argus Vega and Hochiki ESP Protocols
- Flush and Surface Options
- Key Enable Options
In Stock
£500.96 – £782.49 This product has multiple variants. The options may be chosen on the product page -
Kentec Syncro AS I/O Expansion Board Enclosure with optional PSU
Kentec- Matching design & colour scheme for Kentec new style control panel range.
- Easy to install.
- Incorporates Kentec's 'Quick Fit' lid & equipment chassis.
- Front panel mounted status LED indication.
- Space for 3.2Ah batteries.
- Choice of power supplies.
Low Stock
£90.19 – £285.06 This product has multiple variants. The options may be chosen on the product page -
Kentec Syncro AS Lite 1 Loop Addressable Panel
Kentec- 16 Zonal LED Indicators
- Large Graphic Display
- Supports Apollo, Argus Vega, and Hochiki Protocols
- Compact and Stylish Enclosure
In Stock
£397.46 – £447.13 This product has multiple variants. The options may be chosen on the product page -
Kentec Syncro AS Loop 2 Expansion Card
Kentec- Loop 2 Expansion Card
- Available in Apollo, AV, and Hochiki Protocol
In Stock
£269.11 This product has multiple variants. The options may be chosen on the product page -
Kentec Syncro AS or Taktis Addressable Programmable LED Indication Panel
Kentec- 24 programmable LEDs.
- Up to 16 x 24 way Addressable Ident can be connected to each fire panel.
- Programmable flashing or steady states.
- Red, yellow or green indications/ options.
- Common Fire, Fault and Disabled indication.
- Customisable label identification tags.
-
Kentec Syncro Fault Tolerant Network Interface Card
Kentec- High Integrity Protocol
- Simple 2-wire Loop Connection
- Repeaters Share Network Connection
- Flexible Configuration Option
-
Kentec Syncro I/O 16 Channel I/O Board
Kentec- 16 Channels
- Simple two-wire Connection to Control Panel
- Full Cause and Effects
- Compatible with Syncro AS Panels
-
Kentec Syncro Si Addressable Extinguishant Status Unit
Kentec- Reduced installation costs
- Loop powered & wired directly onto either detection loop
- Optional mode select keyswitch
- Protected dual action manual release switch option
- Robust, high quality enclosure
- Only compatible with Apollo protocol Syncro XTand Syncro XT+ control Panels
- Weatherproof version available
Low Stock
£102.31 – £185.26 This product has multiple variants. The options may be chosen on the product page