Fireray One Auto-Aligning Beam Detector
£498.75 (inc VAT: £598.50)
Summary
With no specialist tools or knowledge needed for installation and operation, the Fireray One is a standalone beam detector that prioritises ease of installation. Using the Fireray One, it couldn’t be easier to bring the benefits of beam detection to your application;
- One Minute Auto-Alignment™ using the integrated user interface – just steer the laser onto the Reflector, then at the flick of a switch, it aligns itself. 8 times faster than previous detectors
- One person installation – everything can be done by one person
- One standalone product – no specialist tools required; minimal prior knowledge and training needed
Applications
Application | Challenge | The Fireray One |
---|---|---|
Small Warehouses | Cost effective protection | A standalone beam detector with all the bene ts of Fireray Re ective beam detection |
Simple installation | Single point of wiring and commissioning | |
New Buildings | Building Movement TrackingTM automatically compensates for natural building movement to continuously maintain alignment* |
Features
- Integrated visible laser and auto-alignment for ultimate ease of alignment.
- Integrated user interface.
- Prevent nuisance alarms with Light Cancellation Technology™ which compensates for sunlight and artificial light sources.
- Building Movement Tracking™ continuously maintains alignment when buildings settle or flex due to temperature variations.
- Contamination Compensation to correct for gradual build-up of dust on optics.
- Clean detectors quickly and easily without affecting alignment.
- Low power consumption; can be powered from the loop.
- Prevent interference between beams with Dynamic Beam Phasing; install beams facing each other or in irregular configurations.
- Detection range of up to 120m.
Video
FAQ
What is the minimum clearance required surrounding the beam on Fireray One?
The Fireray One needs a 1m diameter clearance along the whole of the length of it’s run. This applies to all Reflective Beams.
Specifications
- Detection Performance
- Detection Range :
- 0 to 50m
- 0 to 120m with Reflective Long Range Kit
- Alignment Method : Laser assisted, Auto-AlignmentTM. Manual alignment – optional setting
- Auto-Alignment Protocol : Background check, Box search, Adjust and Centre
- Building Movement Tracking : Compensates for natural shifts in alignment from building movement*
- Contamination Compensation : Compensates for gradual build-up of contamination on the optical surfaces
- Light Cancellation Technology : Compensates for high levels of sunlight and arti cial lighting
- Optical Wavelength – Smoke Detection : 850nm near infrared (invisible)
- Integrated Laser – Laser Alignment : 650nm visible. Class IIIa <5mW
- Dynamic Beam Phasing : Allows beam detectors to be mounted facing each other with the re ectors in the middle. Eliminates false alarms caused by crosstalk between beams.
- Signal Output : Individual Alarm and Fault relays (VFCO) 2A @ 30 VDC
- Programmable User Settings
- Alarm Response Threshold Levels :
- 25% (1.25dB) – Fastest response to smoke
- 35% (1.87dB) – Default value
- 55% (3.46dB) – High immunity to false alarms, slow response to smoke
- 85% (8.23dB) – Highest immunity to false alarms, slowest response to smoke
- Configured via the integrated user interface
- Delay to Alarm : 10 seconds, for momentary partial obstruction of the beam path
- Delay to Fault : 10 seconds, for momentary obstruction of the beam path
- User Features
- Integrated User Interface : Alignment mode switch, alignment directional buttons and con guration switches for alarm response threshold
- Alignment Status Indication : 2 Green LEDs and 1 Yellow LED
- System Status Indication :
- Normal operation – Green LED ashing every 10 seconds
- Alarm condition – Red LED ashing every 10 seconds
- Fault condition – Yellow LED ashing every 10 seconds for obscuration or every 5 seconds for contamination
- Cleaning : Flat front face with enclosed optics. Cleaning the optics does not affect alignment
- Design Parameters
- Separation Distance Between Detector and Reflector :
- 5 to 50m
- 50 to 120m with Re ective Long Range Kit
- Beam Path Clearance : 1m in diameter from centre line between Detector and Reflector
- Detector Dimensions : Width 130mm x Height 181mm x Depth 134mm (see diagram)
- Reflector Dimensions :
- Up to 50m separation distance – Single re ector 100mm x 100mm x 9mm
- Up to 120m separation distance – Four re ectors arranged in a square pattern 200mm x 200mm x 9mm
- Product Weight : Detector – 0.7kg; Re ector – 0.1kg
- Multi-Detector Arrangement : Dynamic Beam Phasing allows for Detectors to face each other with the re ectors in the middle
- Housing colour : White RAL9016, UV stable
- Electrical Specifications :
- Operating Voltage : 14 to 36 VDC
- Operating Current (Constant) All Operational Modes : All operational modes – 5mA; Fast alignment mode – 33mA
- Field Wiring :
- Cable Gauge And Type :
- 2 core, dedicated, 0.5 to 1.6mm (24 to 14 AWG)
- System compatible with reproof and non- reproof cable meeting local installation standards
- Cable Entry :
- 3 knock-out locations capable of accepting M20, 1⁄2″ or 3⁄4″ glands
- 4 drill-out locations capable of accepting glands up to 21mm diameter
- Test And Maintenance :
- Alarm Test : Optical alarm test using Commissioning and Maintenance Kit accessory
- Environmental Specifications :
- Operating Temperature : -20 to +55°C
- Storage Temperature : -40 to +85°C
- Relative Humidity (non-condensing or icing) : 0 to 93%
- IP Rating : IP55
- Housing Ammability Rating : UL94 V0 polycarbonate
- Optical Specifications :
- Fault Level / Rapid Obscuration : (âËâ ≤ 2 seconds): ≥85%
- Maximum Angular Alignment of Reflective Detector : ±4.5° (±70° with adjustment bracket accessory)
- Maximum Angular Misalignment of Reflective Detector : ±0.5°
- Maximum Angular Misalignment Of Reflective Detector : ±0.5°
Downloads
- Datasheet (Abobe PDF)
Related Products
-
3 Prism Long Range Kit For Fireray Reflective Infrared Beam Detectors
FFE- Additional 3 prism kit to extend range of Fireray One to 120m.
-
Fireray Detector Adjustment Bracket
FFE- Adjustment bracket for use with Fireray One, End-to-End, Fireray 5000 and Fireray 3000.
- Provides 360° rotation plus up to 180° adjustment.
-
Reflective Detector Ceiling Mount for Fireray One or Fireray 5000
FFE- Ceiling mounting bracket for FFE reflective detector heads.
- Suitable for Fireray One or Fireray 5000.
-
Prism For Fireray Reflective Infrared Beam Detectors
FFE- Replacement single reflective prism for use with the Fiureray range of reflective beam detectors from FFE.
-
Protective Cage for Fireray One
FFE- Protective cage for the Fireray One beam detector.
- Suitable for use with either 1260-000 back box or to a flat surface.
-
Fireray Commissioning And Maintenance Kit For Beam Detectors
FFE- Commissioning & maintenance kit for all Fireray beam detectors.
- Includes cleaning cloth.
-
Back Box for Fireray One
FFE- Surface mount back box for the Fireray One beam detector.
- Includes mounting holes for the 1100-000 protective wire cage.
-
Fireray Reflector Long Range Ceiling Mount
FFE- Long range ceiling mount for Fireray reflectors.
- Pre drilled ceiling plate for easy installation.
- For use with four reflectors.
-
Fireray Reflector Short Range Ceiling Mount
FFE- Short range ceiling mount for Fireray reflectors.
- Pre drilled ceiling plate for easy installation.
-
Anti-Condensation Heater for Fireray One
FFE- Heater designed to reduce condensation on the lens of the Fireray One.
- 24V powered wutg 20W output.
-
Obscuration Test Filter for FFE Fireray Beam Detectors
FFE- Replacment obsuration test filter for the Fireray range of beam detectors.
-
Prism Heater For Fireray Reflective Prisms in White or Black
FFE- Ultra slim heating pad.
- Designed to prevent the build-up of condensation.
- For use in temperature controlled storage areas and cold environments.
-
Reflector Adjustment Bracket for 1 or 4 Prisms
FFE- Prism plate and adjustment bracket for 1 or 4 prisms.