FFE
Know what you're looking for?
Showing all 34 results
-
100m Detector Head For Fireray 5000
FFE- 100m detector head for Fireray 5000 beam smoke detector.
- Supplied with 4 x prisms.
-
3 Prism Long Range Kit For Fireray Reflective Infrared Beam Detectors
FFE- Additional 3 prism kit to extend range of Fireray One to 120m.
-
50m Detector Head For Fireray 5000
FFE- 50m detector head for Fireray 5000 beam smoke detector.
- Supplied with a single prism.
-
Anti-Condensation Heater for Fireray 3000 Detector Head
FFE- Heater designed to reduce condensation on the lens of the Fireray 3000 head.
- 24V powered wutg 20W output.
-
Anti-Condensation Heater for Fireray 5000 Detector Head
FFE- Heater designed to reduce condensation on the lens of the Fireray 5000 head.
- 24V powered wutg 20W output.
-
Anti-Condensation Heater for Fireray One
FFE- Heater designed to reduce condensation on the lens of the Fireray One.
- 24V powered wutg 20W output.
-
Back Box for Fireray One
FFE- Surface mount back box for the Fireray One beam detector.
- Includes mounting holes for the 1100-000 protective wire cage.
-
End-to-End Detector Ceiling Mount for Fireray 3000
FFE- Ceiling mounting bracket for FFE end-to-end detector heads.
- Suitable for Fireray 3000.
-
FireRay 2000 – End to End Infrared Optical Beam Smoke Detector
FFEKey Features
- Separate transmitter and receiver units
- Coverage 10 - 100m
- Adjustable sensitivity levels
- Ground level control unit
- Automatic self check drift compensation: The system monitors long term degradation due to build up of dirt on the optical surfaces
- Small unobtrusive transmitter and receiver heads
- Complies with BS5839 part 5
- World-wide approvals including VdS and UL
-
-
Fireray 3000 End to End Infrared Optical Beam Smoke Detector
FFE- Allows for 2 detectors per system controller.
- Range 5 to 120 metres, configurable per set of detectors.
- Integral laser alignment in receiver.
- 2-wire interface between controller and receiver.
- Separate fire and fault relays per detector.
-
-
Fireray 3000 Exd Flameproof Optical Beam Smoke Detector
FFE- Separate transmitter and receiver unit certified to Exd.
- Allows for 2 detectors per system controller.
- Range 10 to 80 meters, (33ft to 262ft) configurable per set of detectors.
- Integral laser alignment in receiver.
-
-
Fireray 5000 Auto-Aligning Reflective Beam Smoke Detector With 50 or 100m Head
FFE- Allows for 2 x detectors per system controller.
- Each detector configurable from 8m to 100m.
- Separate fire and fault relays per detector.
- Integral laser alignment.
- Auto-align fast automatic beam alignment.
-
Fireray Commissioning And Maintenance Kit For Beam Detectors
FFE- Commissioning & maintenance kit for all Fireray beam detectors.
- Includes cleaning cloth.
-
Fireray Detector Adjustment Bracket
FFE- Adjustment bracket for use with Fireray One, End-to-End, Fireray 5000 and Fireray 3000.
- Provides 360° rotation plus up to 180° adjustment.
-
Fireray One Auto-Aligning Beam Detector
FFE- Integrated visible laser and auto-alignment for ultimate ease of alignment.
- Integrated user interface.
- Prevent nuisance alarms with Light Cancellation Technology™ which compensates for sunlight and artificial light sources.
- Building Movement Tracking™ continuously maintains alignment when buildings settle or flex due to temperature variations.
- Contamination Compensation to correct for gradual build-up of dust on optics.
- Clean detectors quickly and easily without affecting alignment.
- Low power consumption; can be powered from the loop.
- Prevent interference between beams with Dynamic Beam Phasing; install beams facing each other or in irregular configurations.
- Detection range of up to 120m.
-
Fireray Reflector Long Range Ceiling Mount
FFE- Long range ceiling mount for Fireray reflectors.
- Pre drilled ceiling plate for easy installation.
- For use with four reflectors.
-
Fireray Reflector Short Range Ceiling Mount
FFE- Short range ceiling mount for Fireray reflectors.
- Pre drilled ceiling plate for easy installation.
-
Four Prism Plate For Use With FFE Universal or Adjustment Bracket
FFE- Four prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
Obscuration Test Filter for FFE Fireray Beam Detectors
FFE- Replacment obsuration test filter for the Fireray range of beam detectors.
-
Prism For Fireray Reflective Infrared Beam Detectors
FFE- Replacement single reflective prism for use with the Fiureray range of reflective beam detectors from FFE.
-
Prism Heater For Fireray Reflective Prisms in White or Black
FFE- Ultra slim heating pad.
- Designed to prevent the build-up of condensation.
- For use in temperature controlled storage areas and cold environments.
-
Protective Cage for Fireray 5000 Controller
FFE- Protective cage for the Fireray 5000 beam controller.
-
Protective Cage for Fireray 5000 Detector Head
FFE- Protective cage for the Fireray 5000 beam detector.
-
Protective Cage for Fireray One
FFE- Protective cage for the Fireray One beam detector.
- Suitable for use with either 1260-000 back box or to a flat surface.
-
Reflective Detector Ceiling Mount for Fireray One or Fireray 5000
FFE- Ceiling mounting bracket for FFE reflective detector heads.
- Suitable for Fireray One or Fireray 5000.
-
Reflector Adjustment Bracket for 1 or 4 Prisms
FFE- Prism plate and adjustment bracket for 1 or 4 prisms.
-
Reflector Wall Bracket for Fireray Prisms in White or Black
FFE- Surface mount plate for Fireray prisms.
- Hole pattern suitable for either 1 or 4 prisms.
- Available in white or black.
-
Single Prism Plate For Use With FFE Universal or Adjustment Bracket
FFE- Single prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
Spare System Controller for Fireray 5000
FFE- Spare systems controller for the Fireray 5000 auto-aligning beam detector.
-
Universal Bracket For FFE Fireray 5000 Detector Head or Prism Plate
FFE- Universal bracket for Fireray 5000 detector head or prism plate.
- Bracket pivots for accurate alignment of beam detector and prisms.
-
Universal Ceiling Mount for Fireray 5000, 3000, Prism or Universal Bracket
FFE- Universal ceiling mount for the Fireray 5000, Fireray 3000, Fireray prism or Fireray universal bracket.
- Supplied with 2 x mounting plates and 1 x blank cover plate.