Detector
Know what you're looking for?
Showing 1–50 of 87 results
-
Nittan Evolution H2 Addressable Heat Detector with Short Circuit Isolator
Nittan- Heat category P (A1R/A2S/BS/CS)
- Integral -ve short circuit isolator
- Evolution FSK protocol
- EEPROM addressed with programmer
-
Nittan Evolution PY Addressable Optical Smoke Detector
Nittan- Replaces EV-P from September 2024
- Improvements to smoke sensing chamber
- Orange LED, which significantly improves response across the fire spectrum
- Chamber construction is also designed to minimise the effect of dirt/dust contamination
-
Nittan Evolution PY Addressable Optical Smoke Detector with Short Circuit Isolator
Nittan- Integral -ve short circuit isolator
- Improvements to smoke sensing chamber
- Orange LED, which significantly improves response across the fire spectrum
- Chamber construction is also designed to minimise the effect of dirt/dust contamination
-
Nittan Evolution PYH Addressable Optical & Heat Multi-Sensor Detector
Nittan- Replaces EV-PH from September 2024
- Orange optic LED and PY type Chamber
- 3 sensitivity settings
- Heat category A1R
-
Nittan Evolution PYH Addressable Optical & Heat Multi-Sensor Detector with Short Circuit Isolator
Nittan- Orange optic LED and PY type chamber
- 5 sensitivity settings
- Heat category P (A1R/A2S/BS/CS)
- Integral -ve short circuit isolator
-
ALN-EN Hochiki ESP Photoelectric Smoke Sensor (Ivory or White)
Hochiki- Removable, High Performance chamber
- Twin LEDs allow 360° viewing – green when polling, turn red in fire
- Availble in Ivory or White finish
-
ATJ-EN Hochiki ESP Analogue Heat Sensor (Ivory or White)
Hochiki- Incorporates Fixed Temperature and Rate Of Rise Heat elements
- Electronically addressed
- Available in Ivory or White
-
ACC-EN Hochiki ESP Multi-Sensor Photoelectric and Heat (Ivory or White)
Hochiki- User selectable modes
- Incorporates Optical & Heat elements
- Availble in Ivory or White finish
-
ACB-EW Hochiki ESP Weatherproof Heat Sensor
Hochiki- IP67 Rated
- Incorporates Fixed Temperature and Rate Of Rise Heat elements
- Supplied with fixing base
-
ActiV Conventional Heat Smoke Detector
C-Tec- Third-party certified to EN54-5 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
- Wide 6-33V DC operating voltage
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility
- Sophisticated onboard detection algorithms help reduce false alarms by rejecting momentary abnormal readings
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases (all bases include an integrated detector/base locking mechanism and ID tag)
- Class A2 fixed heat, class B fixed heat, optical and multi-sensor variants also available
-
ActiV Conventional Multi-Sensor Fire Detector
C-Tec- A high-quality combined optical + heat multi-sensor offering outstanding detection performance at a very competitive price
- Third-party certified to EN54-5 & 7 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
- Wide 6-33V DC operating voltage
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility
- Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases (all bases include an integrated detector/base locking mechanism and ID tag)
- Class A1 fixed heat, class B fixed heat, class A1R rate-of-rise and optical variants also available
-
ActiV Conventional Optical Smoke Detector
C-Tec- A high-quality optical smoke detector offering outstanding detection performance at a very competitive price.
- Manufactured by C-TEC in the UK.
- Third-party certified to EN54-7 by Intertek.
- Wide 6-33V DC operating voltage.
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
- Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels allowing a greater than 8 year life-span.
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.
-
Apollo 58000-305 Discovery CO & Heat Multisensor Detector
Apollo- Responds to smouldering and flaming fires.
- Less susceptible to false alarms caused by steam and dust.
- Five response modes.
- Remote test feature.
-
Apollo Discovery 58000-300 Carbon Monoxide Detector
Apollo- Early warnign of carbon based smouldering fires.
- Resistance to false alarms in areas with high levels of steam and other airborne particles.
- Ideal for protecting small volume sleeping risk areas.
- Resitance to contamination in dirty and dusty conditions.
- Excellent supplement to fire detection systems to improve detection of smouldering hydrocarbon fires.
-
Apollo Discovery Heat Detector
Apollo- Ideal in environments that are dirty or smoky under normal conditions
- Well-suited to warehouses, loading bays and car parks
- Unaffected by wind or atmospheric pressure
- Five response modes
- Remote test feature
-
Apollo Discovery Multisensor Detector
ApolloKey Features
- Ideal for a wide range of applications
- Enhanced false alarm management
- Recommended, in specific modes, for hotel bedrooms and hospital wards
- Unaffected by wind or atmospheric pressure
- Well-suited to sensitive environments
- Five EN 54 approved response modes
- Heat only and optical only options
- Remote test feature
-
Apollo Discovery Optical Smoke Detector
ApolloKey Features
- Responds well to slow-burning smouldering fires
- Well suited for bedrooms and escape routes
- Unaffected by wind or atmospheric pressure
- Five response modes
- Remote test feature
-
Apollo Orbis Conventional Optical Smoke Detector
Apollo- Orbis Optical Smoke Detector
- Responds well to slow-burning, smouldering fires
- Good performance in both black and white smoke
- Transient rejection algorithms reduce false alarms
- Automatic drift compensation with DirtAlert, a yellow flashing LED, to easily identify dirty detectors
- Red flashing LED at StartUp confirms that the device is operating.
- SensAlert, yellow flashing LED, indicates faulty operation
- FasTest takes just 4 seconds to test and confirm detectors are functioning correctly
- FasTest® takes just four seconds to test and confirm detectors are functioning correctly
- DustDefy system prevents dust ingress while maintaining airflow
-
Apollo Series 65 Conventional Heat Detector
Apollo- Series 65 conventional heat detector.
- Choice of 4 heat classes.
- Ideal for environments that are dirty or smoky under normal circumstances.
-
Apollo Series 65 Optical Smoke Detector
ApolloThe Apollo Series 65 Optical Smoke Detector has a external LED for easy identification. 3 consecutive optical smoke detector sensor activations are required to trigger an alarm state. -
Apollo XP95 Heat Detector
Apollo- Ideal in environments that are dirty or smoky under normal conditions
- Well-suited to warehouses, loading bays and car parks
- Unaffected by wind or atmospheric pressure
-
Apollo XP95 High Temperature Heat Detector
Apollo- Ideal in environments that are dirty or smoky under natural conditions
- Well suited for warehouses, loading bays and car-parks
- Unaffected by wind or atmospheric pressure
-
Apollo XP95 Multisensor Detector
Apollo- Sensitive to a wide range of fires
- Well suited for environments such as hotel bedrooms
- Unaffected by wind or atmospheric pressure
-
Apollo XP95 Optical Smoke Detector in White or Black
Apollo- Alarm flag for fast alarm reporting.
- Alarm address for fast location of alarm.
- XPERT 7 Card addressing.
- Electronics-free base.
- Easy installation.
- Elegant design.
- XP95, Discovery and CoreProtocol compatible.
- Responds well to slowburning, smouldering fires.
- Well-suited to bedrooms and escape routes.
- Unaffected by wind or atmospheric pressure.
-
Fyreye MKII Addressable Optical Smoke Detector
Zeta Alarms- 8 LEDs for improved, 360° visibility
- Remote LED output
- Addressed with dip switches or hand-held programmer
-
Fyreye MKII Addressable Rate of Rise Heat Detector
Zeta Alarms- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
-
Fyreye MKII Addressable Fixed Heat Detector
Zeta Alarms- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
-
Fyreye MKII Addressable Combined Smoke & Heat Detector
Zeta Alarms- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
-
Eaton FXN922 Selectable Multi-Mode Conventional Detector
Eaton- 5 modes in 1 detector
- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
-
Eaton Conventional Enhanced Optical Smoke Detector
Eaton- LPCB 3rd party approved / CPD approved
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
- New enhanced detectors feature Dual LEDs
- 1 x Receiver - receives the beam of infrared light
- Drift compensation and Chamber monitoring (Optical & Photo-Thermal)
- Part Codes - MPD821, CPD321, FXN533
-
Eaton Conventional Heat Detector
Eaton- Rate of rise, fixed at 77°C or fixed at 92°C models available.
- 360° visibility LED using lightpipe technology.
- Aesthetically pleasing.
- Quick and simple to install.
-
Eaton Cooper CAH330 Addressable Heat Sensor
Eaton- Addressable heat sensor.
- Soft addressed.
- Integral short circuit isolator.
- Single address.
- Wide range of sensor types.
- 360° visibility LED using lightpipe technology.
- Drift compensation.
- Aesthetically pleasing.
- Quick and simple to install.
- Single “multi-mode” heat sensor.
- Wide viewing angle for increased LED visibility.
- Common mounting base.
- Positive “lock” indication.
- Discreet design for incorporation into any decor.
- Easy to maintain/service.
-
Eaton Cooper CAP320 Addressable Optical Sensor
Eaton- Addressable optical sensor.
- Soft addressed.
- Integral short circuit isolator.
- Single address.
- Wide range of sensor types.
- 360° visibility LED using lightpipe technology.
- Drift compensation.
- Aesthetically pleasing.
- Quick and simple to install.
- Single “multi-mode” heat sensor.
- Wide viewing angle for increased LED visibility.
- Common mounting base.
- Positive “lock” indication.
- Discreet design for incorporation into any decor.
- Easy to maintain/service.
-
Eaton Cooper CAPT340 Addressable Photo Thermal Dual Sensor
Eaton- Addressable photo thermal ‘Dual’ sensor.
- Soft addressed.
- Integral short circuit isolator.
- Single address.
- Wide range of sensor types.
- 360° visibility LED using lightpipe technology.
- Drift compensation.
- Aesthetically pleasing.
- Quick and simple to install.
- Single “multi-mode” heat sensor.
- Wide viewing angle for increased LED visibility.
- Common mounting base.
- Positive “lock” indication.
- Discreet design for incorporation into any decor.
- Easy to maintain/service.
-
ESP FIREbeam XTRA Analogue Addressable Beam Smoke Detector
Hochiki- 7-70 m standard detection range.
- Extensions kits available to enhance detection range up to 160m.
- Fully compatible with the Hochiki ESP analogue addressable protocol.
-
Fyreye Addressable High Temperature Heat Detector
Zeta AlarmsThe FEAH2000 is an analogue addressable Heat detector that works to the Zeta Addressable protocol. The measuring circuit is based on a single precision thermistor, whose characteristics change according to temperature in a deï¬ned manner.
-
Fyreye Addressable Rate Of Rise Heat Detector
Zeta AlarmsThe FEAH2000 is an analogue addressable Heat detector that works to the Zeta Addressable protocol. Change in characteristics is converted to an analogue value, and sent digitally back to the ï¬re alarm control panel.
-
Fyreye Extra Analogue Addressable Optical Smoke Detector
Zeta Alarms- Addressable optical detector for Zeta MK1 legacy addressable systems
- Twin LEDs to improve alarm indication
-
Fyreye MKII Addressable Fixed Heat (CS90) Detector
Zeta Alarms- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Compatible with all Fyreye MkII bases
- Addressed with dip switches or hand-held programmer
-
Fyreye MKII Combined Smoke and Heat Detector
Zeta Alarms- Conventional combined smoke & heat detector
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fixed Heat Detector
Zeta Alarms- Conventional fixed high-temperature heat detector
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector
Zeta Alarms- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
- Compatible with all Fyreye MkII bases
-
Fyreye MKII Conventional Optical Smoke Detector
Zeta Alarms- Conventional optical smoke detector
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
Zeta Alarms- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
Gent ES Detect Conventional Heat Detector
Gent- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
-
Gent ES Optical Smoke Conventional Detector
Gent- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent S-Quad Addressable Detector
Gent- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
-
Gent S-Quad Addressable Detector with Sounder
Gent- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice
Gent- Dual optical heat sensor
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice & VAD Beacon
Gent- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs