No
Know what you're looking for?
Showing 151–200 of 315 results
-
Fike Twinflex Hatari Sounder
Fike- Configurable sounder output level
- 100dBa maximum output
- Available in red or white
-
Fike Twinflex SoundPoint
Fike- 85dBa maximum output
- Three selectable sounder tones
- Available in red or white
-
Firebeam BLUE Auto-Aligning Beam Detector 7-70m, Expandable Up To 160m Range
The Fire Beam Company- Connect to Your chosen beam
- Commission your beam
- Motorised head unit.
- Change the beams modes
- Maintain your beam
- Adjust and diagnose your beam
- Perform a fire test
-
Fireray 3000 End to End Infrared Optical Beam Smoke Detector
FFE- Allows for 2 detectors per system controller.
- Range 5 to 120 metres, configurable per set of detectors.
- Integral laser alignment in receiver.
- 2-wire interface between controller and receiver.
- Separate fire and fault relays per detector.
-
Fireray 5000 Auto-Aligning Reflective Beam Smoke Detector With 50 or 100m Head
FFE- Allows for 2 x detectors per system controller.
- Each detector configurable from 8m to 100m.
- Separate fire and fault relays per detector.
- Integral laser alignment.
- Auto-align fast automatic beam alignment.
-
Fireray One Auto-Aligning Beam Detector
FFE- Integrated visible laser and auto-alignment for ultimate ease of alignment.
- Integrated user interface.
- Prevent nuisance alarms with Light Cancellation Technology™ which compensates for sunlight and artificial light sources.
- Building Movement Tracking™ continuously maintains alignment when buildings settle or flex due to temperature variations.
- Contamination Compensation to correct for gradual build-up of dust on optics.
- Clean detectors quickly and easily without affecting alignment.
- Low power consumption; can be powered from the loop.
- Prevent interference between beams with Dynamic Beam Phasing; install beams facing each other or in irregular configurations.
- Detection range of up to 120m.
-
Fulleon Askari Compact Conventional Sounder in Red or White
Fulleon- 32 tones (user selectable)
- Automatic synchronisation
- Two stage alarm
- Discrete design
- Available in Red or White
-
Fulleon Flashni Conventional Xenon Sounder Beacon
Fulleon- High output sounder beacon.
- 12V, 24V and mains module option.
- Choice of lens colour options.
- Automatic sounder synchronisation.
-
Fulleon RoLP LX Roshni Wall Sounder Flasher – Red
Fulleon- Ultra Low Current Consumption
- Up to 7.5M Coverage
- Switchable Flash Rate
- IP65 Protected
-
Fulleon Solista Conventional LED Beacon
Fulleon- Ultra low current.
- LED technology.
- High reliability.
- Long service life.
- Locking base.
- Compact size.
-
Fulleon SQG3 Base Sounder in White Housing
Fulleon- Conventional platform sounder.
- Supplied in white housing.
-
Fulleon Squashni Conventional Platform Sounder
Fulleon- Fixing platform for detector or beacons
- Low current consumption
- Blank cover for use as a stand alone sounder
- Reduced installation cost
- Colour matched to leading manufacturers detectors
- Tamper proof cap
-
Fulleon Symphoni Low Current Wall Sounder
Fulleon- Low 5mA current consumption.
- 100dB(A).
- Automatic synchronisation.
- Weatherproof option.
-
Fyreye Addressable High Temperature Heat Detector
Zeta AlarmsThe FEAH2000 is an analogue addressable Heat detector that works to the Zeta Addressable protocol. The measuring circuit is based on a single precision thermistor, whose characteristics change according to temperature in a deï¬ned manner.
-
Fyreye Addressable Rate Of Rise Heat Detector
Zeta AlarmsThe FEAH2000 is an analogue addressable Heat detector that works to the Zeta Addressable protocol. Change in characteristics is converted to an analogue value, and sent digitally back to the ï¬re alarm control panel.
-
Fyreye Extra Analogue Addressable Optical Smoke Detector
Zeta Alarms- Addressable optical detector for Zeta MK1 legacy addressable systems
- Twin LEDs to improve alarm indication
-
Fyreye MKII 12V Auto Reset Relay Base
Zeta AlarmsEnter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye MKII Addressable Fixed Heat (CS90) Detector
Zeta Alarms- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Compatible with all Fyreye MkII bases
- Addressed with dip switches or hand-held programmer
-
Fyreye MKII Combined Smoke and Heat Detector
Zeta Alarms- Conventional combined smoke & heat detector
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fixed Heat Detector
Zeta Alarms- Conventional fixed high-temperature heat detector
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector
Zeta Alarms- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
- Compatible with all Fyreye MkII bases
-
Fyreye MKII Conventional Optical Smoke Detector
Zeta Alarms- Conventional optical smoke detector
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
Zeta Alarms- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
-
Fyreye Relay Base
Zeta AlarmsThe Relay base is mainly used on 12V security systems to signal detector operation to the panel. They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).
-
Gent Addressable Manual Call Point
Gent- Resettable or break glass.
- Lift up protective covers.
- Keyswitch
- Weatherproof version (IP67) suitable for external areas
- Up to 200 per loop
- Integral short-circuit isolator
- Surface or Semi Flush options
-
Gent ES Detect Conventional Heat Detector
Gent- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
-
Gent ES Detect Conventional Standard Base With or Without Diode
Gent- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
Gent ES Optical Smoke Conventional Detector
Gent- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent Indoor Conventional Manual Call Point
Gent- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
-
Gent S-Quad Addressable Detector
Gent- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
-
Gent S-Quad Addressable Detector with Sounder
Gent- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice
Gent- Dual optical heat sensor
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent S-Quad Addressable Detector with Voice & VAD Beacon
Gent- Heat, dual angle optical scatter and carbon monoxide (CO)
- Certified sensitivity settings that suit certain environments/applications
- Short circuit Isolator in each device
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs
-
Gent Weatherproof Conventional Manual Call Point
Gent- Fully compliant with EN54, Part 11.
- Glass operating element.
- Weather proof IP67.
- Supplied with surface mount back box.
-
GST DB-01D Common Conventional Detector Diode Base
GST- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
GST DC-9101E Conventional Combination Smoke & Heat Detector
GST- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9102E Conventional Photoelectric Smoke Detector
GST- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
GST- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
-
GST I-9105R Reflective Infrared Beam Smoke Detector
GST- Wide operating voltage range.
- Large protection areas.
- Combination of transmitter & receiver in one housing allows easy optical alignment.
- Intelligent microprocessor based decision making on fire and fault statuses.
- Easy one person installation & operation due to simple calibration and setup processes.
-
Hochiki CDX Conventional Combined 60 Degree Heat Detector
Hochiki- Electronic Linear Heat Detection
- Remote Indicator Output
- Slimline Design
- Available in White
-
Hochiki CDX Conventional Mounting Base in Ivory or White
Hochiki- Integeral Remote Indicator Output
- Low Profile
- Rugged Design
- Accepts 2.5mm Cable
-
Hochiki Conventional Schottky Diode Base in Ivory or White
Hochiki- Integral remote indicator output
- In-line Schottky Diode for line continuity
- Low profile, only 8mm
-
Hochiki CHQ-AB ESP Addressable Beacon
Hochiki- High Intensity LED technology
- Choice of Red, Amber or Blue lens colour
- Approved by VdS
-
Hochiki CHQ-CB Addressable Loop Powered Ceiling VAD
Hochiki- Ceiling mouted certified VAD.
- Loop powered.
- Choice of 2 LED colours (red or white).
- Choice of 3 case colours (white, ivory or red).
-
Hochiki CHQ-WB Addressable Loop Powered Wall Beacon VAD
Hochiki- Wall mouted certified VAD.
- Loop powered.
- Choice of 2 LED colours (red or white).
- Choice of 3 case colours (white, ivory or red).
-
Hochiki CHQ-WS2 ESP Addressable Wall Sounder in Red or White
Hochiki- Loop powered adderssabel Hochiki sounder
- 51 User-Selectable Tones
- Available in Red or White
-
Hochiki CHQ-WSB2 ESP Addressable Wall Sounder Beacon in Red or White
Hochiki- Single Loop Address - addressed via the TCH-B200 Hand Held Programmer.
- Variable Sound Output 90 ~ 102 dB(A) (±2 dB(A)) output at 1 metre.
- Sounder and Beacon can operated independently*1.
- ‘O’ Rated Beacon to EN54-23.
- Available with Red or White LEDs.
- Available with Red or White case.
- Weatherproof Kit available.
-
Hochiki Conventional 2 Wire Base In Ivory or White
Hochiki- Sav-Wire detector mounting base
- Available in Ivory or White
-
Hochiki Conventional Beacon
Hochiki- High Intensity LED technology
- Colour-matched to existing Ivory and White detector and base ranges
- Fits standard CDX base (YBN-R/6)