No
Know what you're looking for?
Filter Products
Manufacturer
Apollo(72)
C-Tec(9)
Cranford Conrols(2)
Cranford Controls(3)
Eaton(18)
FFE(3)
Fike(14)
Fireco(1)
Fulleon(10)
Gent(7)
Geofire(2)
GST(5)
Hochiki(25)
KAC(2)
Klaxon(9)
Morley-IAS(3)
Moyne Roberts(1)
Nittan(19)
Notifier(1)
System Sensor(7)
The Fire Beam Company(2)
Vimpex(8)
Zeta Alarms(34)
Ziton(11)
Type
Reflective(7)
End-to-End(1)
Technology
Resolution
A Rating
Alarm In/Out
Anti-Fog
No(8)
Yes(2)
Audio In/Out
Auto Aligning
Yes(6)
No(2)
B Rating
Battery
Bluetooth Controller
No(7)
Yes(1)
Built-in Mic
Built-in Speaker
C Rating
Channels
Class A Holes
Class B Holes
Class C Holes
CO Testing
Codec
Colour
Black(12)
White(143)
Grey(1)
Ivory(12)
Red(63)
Red/Translucent(2)
Translucent(4)
White/Translucent(2)
Yellow(1)
Detection Type
CO(1)
Flame(1)
Heat(32)
Multi-Sensor(17)
Multi-Sensor & CO(2)
Smoke(27)
Device Type
Detector(69)
Bell(2)
Bell/VAD(1)
Manual Call Point(2)
Pillow Alarm(3)
Sounder(41)
Sounder/Beacon(1)
Sounder/VAD(17)
Sounder/VID(16)
VAD(11)
VID(13)
Voice Sounder(2)
Direction
Environment
Indoor(138)
Indoor/Outdoor(2)
Outdoor(59)
IR Range
Extinguisher Type
F Rating
Face Detection
Fast Fix Base
First Aid
Hazardous Applications
Head Removal
Heat Testing
Interconnectable
Lens
Lines
Low Level Controller
Yes(5)
No(3)
Marine Applications
No(185)
Yes(17)
Material
Max HDD Capacity
Max Loops
Maximum Record Resolution
Minimum Distance
7m(3)
5m(2)
8m(3)
Monitor Outputs
Networkable
Optical Zoom
Photoluminescent
Pipework Diameter
PoE Ports
Power
Protocol
Zeta Standard(1)
Core(2)
Discovery(8)
Eaton(3)
ESP(9)
Evolutiom(1)
Evolution(8)
Fike(6)
GENT by Honeywell(1)
Morley-IAS(2)
NOTIFIER by Honeywell(1)
Protocol 800(2)
Sensortec(1)
Series 200 Advanced(5)
Sita(1)
XP95(18)
XP95/Discovery(4)
XP95/Discovery/Core(2)
Zata Standard(2)
Zeta MKI(1)
Zeta MKII(10)
Zeta MKII/Zeta MKI(1)
ZP7(5)
Range
160m(3)
100m(3)
120m(2)
50m(1)
Reach
Relay
Yes(6)
No(36)
Remote Control Test
Self-Test
Series
Short Circuit Isolator
No(94)
Yes(48)
Sign Type
Size
Smoke Testing
Stimulus Type
System Type
Conventional(105)
2-Wire(12)
Acoustic(3)
Addressable(140)
Addressable/Conventional(1)
Touchscreen
Wireless Interlink
Showing 51–100 of 269 results
-
Apollo XP95 Isolating Base
ApolloThe XP95 Isolating Base isolates short circuits in the addressable loop while allowing the associated detector to remain active.
-
Apollo XP95 Loop Powered VAD, White Body, White Flash, Ceiling Category
Apollo- Uses high intensity LED.
- EN 54-23 Compliant Category C VAD.
- Flash rate 0.5Hz.
- Fault signal if LED check failed.
-
Apollo XP95 Loop-Powered Visual Indicator Base with Isolator
Apollo- Visual indicator flash rate of once per second
- Synchronisation of visual indicator flash
- Individual and group addressing
- Unique visual indicator self-test
- Loop-powered
- Built-in Isolator
-
Apollo XP95 Multi-tone Open Area Indoor Sounder
Apollo- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of ‘alert’ and ‘evacuate’ tones.
- Individual & group addressing.
- Three tones on standard devices; Apollo, slow whoop and DIN – all of which comply with EN54–3:2001.
-
Apollo XP95 Multisensor Detector
Apollo- Sensitive to a wide range of fires
- Well suited for environments such as hotel bedrooms
- Unaffected by wind or atmospheric pressure
-
Apollo XP95 Open-Area Sounder & Beacon, Red Body, Red Lens
Apollo- Choice of tones on standard device: Apollo, Slow Whoop and DIN.
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of 'alert' and 'evacuate' tones.
-
Apollo XP95 Optical Smoke Detector in White or Black
Apollo- Alarm flag for fast alarm reporting.
- Alarm address for fast location of alarm.
- XPERT 7 Card addressing.
- Electronics-free base.
- Easy installation.
- Elegant design.
- XP95, Discovery and CoreProtocol compatible.
- Responds well to slowburning, smouldering fires.
- Well-suited to bedrooms and escape routes.
- Unaffected by wind or atmospheric pressure.
-
Apollo XP95 VAD Base with Isolator
ApolloKey Features
- EN 54-23 Certified Category O VAD
- 0.5Hz Flash Rate (white)
- Synchronisation of VAD flash
- Individual & group addressing
- Unique VAD self-test
- Loop-powered
- Built-in isolator
-
Askari Flange Sounder in Red or White
Fulleon- Easily fitted within or on control cabinets.
- Easily fitted to most surfaces.
- Can be used in exposed locations.
-
Banshee Excel Flashdome LED Beacon With Optional IP66 Base
Vimpex- Ultra-efficient LEDs.
- Very low current consumption.
- Sleek, low-profile design.
- Compatible with other Excel Sounders and Sounder Beacons and accessories.
- Uses same bases as Banshee - simple push and twist bayonet mounting with locking screw.
-
Banshee Excel Lite CHL IP66 Sounder & LED Beacon
Vimpex- IP66 or weathproof rated (Deep Base option only)
- Very low consumption conventional sounder/flasher
- Easy to install
- Choice of 3 volume levels
-
Infinity ID2 Manual Call Point
Zeta Alarms- Manual call point for the Infinity ID2 system
- Indoor or outdoor (IP67) version available
- Visible warning flag confirms activation
-
Fyreye MKII Addressable Optical Smoke Detector
Zeta Alarms- 8 LEDs for improved, 360° visibility
- Remote LED output
- Addressed with dip switches or hand-held programmer
-
Fyreye MKII Addressable Rate of Rise Heat Detector
Zeta Alarms- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
-
Fyreye MKII Addressable Fixed Heat Detector
Zeta Alarms- Designed to meet EN54 requirement
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
-
Fyreye MKII Addressable Combined Smoke & Heat Detector
Zeta Alarms- Designed to meet EN54 requirement
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Addressed with dip switches or hand-held programmer
-
Fyreye MKII Addressable Detector Base
Zeta AlarmsThe MkII range of detectors can be mounted on 3 different bases, a shallow base (MKII-CB), a deep base (MKII-CB/D) and an isolator base (MKII-IB).
-
Zeta ZP4 Addressable Manual Call Point
Zeta Alarms- Indoor call point compatible with Zeta addressable panels.
- Supplied with backbox for surface mount installations (optional flush mount bezel available).
- Very high visibility of the alarm condition.
- New efficient and reliable mechanism.
- High impact resistant ABS glass fibre material.
- Approved to EN 54-11.
-
Fyreye MKII Sandwich Sounder & Flasher Base
Zeta Alarms- Plug & play (no wiring, just fit to base)
- Multiple programmable tones
-
Xtratone MKII Addressable Sounder in Red or White
Zeta Alarms- Indoor MKII addressable sounder compatable with Zeta control panels.
- 102dB @ 1m sound output.
- Available in Red or White.
-
Xtratone MKII Addressable Combined Sounder & Beacon in Red or White
Zeta Alarms- Indoor MKII addressable combined sounder & beacon compatable with Zeta control panels.
- 102dB @ 1m sound output.
- Flush or surface fixing.
-
Raptor MKII Addressable Weatherproof Sounder in Red or White
Zeta Alarms- IP65 weatherproof sounder.
- Compatible with the Zeta MKII addressable protocol.
- Available in red or white.
-
Raptor MKII Addressable Weatherproof Combined Sounder & Beacon in Red or White
Zeta Alarms- IP65 weatherproof sounder/beacon.
- Compatible with the Zeta MKII addressable protocol.
- Available in red or white.
-
C-Tec ActiV 96dB Conventional Base Sounder
C-Tec- Third-party certified to EN54-3 (Sounders)
- Impressive 96dB(A) sound output @ 1m
- 31 selectable primary and secondary tone pairs and two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA
- Alarm Current at 18Vdc = 3.8mA
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
-
C-Tec ActiV Conventional Base Sounder VAD (C-3-8.5)
C-Tec- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs)
- Provides 'C-3-8.5' light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area)
- Impressive 96dB(A) sound output @ 1m
- Includes 31 selectable primary tones and an optional secondary tone
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- Supplied with a BF431QCP quick connect plate and detector spur wires
- IP21C rated
-
C-Tec BF431A/CX/W Addressable XP95 Compatible 96dB Base Sounder
C-Tec- Impressive 96dB(A) sound output @ 1m.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- Onboard short-circuit loop isolator.
-
C-Tec Hi-Output XP95 Wall Sounder
C-TecKey Features
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
- Impressive 103dB(A) sound output @ 1m
- Onboard short-circuit loop isolator
- 550µA quiescent current./li>
- 5mA alarm current @24V DC (sounder on max)
- Group addressing facility allows multiple devices to be operated simultaneously
- 7 selectable volume levels and up to 15 selectable tone pairs
- IP21C (Type A) rated.
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
-
C-TEC Surface Mounting No Break Fire Call Point
C-Tec- Cable termination: 5-2.5mm 2
- Maximum voltage: 30Vd.c
- Current rating: 2 Amps
- IP rating: IP24D
- Material: PC/ABS
- Weight: 160g
- Dimensions: 89x93x59mm
- Colour: Red
-
ClamBell EN54-3 Approved Fire Alarm Bell
Vimpex- Permanently fitted gong.
- Specifically designed weatherproof back box.
- Slick and modern looking.
- Fully customised pad printed branding.
- Strobell EN-23 VAD option which integrates ClamBell and VAD for unique combined unit will be available soon.
-
Conventional Raptor Sounder Beacon White Flasher
Zeta Alarms- Complies with EN54 Pt 3 Type B & EN54 Pt 23.
- 107dB +/- 3dB @ 1m sound output.
- 22 Tone patterns (site selectable).
- Suitable for surface mounting only.
- Housed in UL V0 flame retardant ABS.
- 3 x 20mm cable entries (2 top, 1 bottom).
- First fix, wire to back box technology.
- IP65 Rating.
- Flashing rate 0.5Hz
-
Conventional Raptor Weatherproof Sounder
Zeta Alarms- Complies with EN54 Part 3 Type B.
- 107dB +/- 3dB @ 1m sound output.
- 22 Tone patterns (site selectable).
- Suitable for surface mounting only.
- Housed in UL V0 flame retardant ABS.
- 3 x 20mm cable entries (2 top, 1 bottom).
- First fix, wire to back box technology.
- IP65 Rating.
-
Conventional Symphoni LX Wall Sounder Beacons
Eaton- Ultra low current consumption.
- Up to 7.5m coverage volume (switchable to 2.5m).
- Coverage switch to 2.5m.
- Available as weatherproof (IP66) version.
-
Cooper Fire 5 in 1 Multi Sensor (Selectable)
Eaton- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
- 360° viewable LED design
- 5 modes in 1 detector
- Unobtrusive design
- Common mounting base
- Improved system integrity
-
Cooper Intelligent Addressable Sounder Base
Eaton- Integral short circuit isolator
- Integral sensor mounting base
- Can be used with a sensor as a sounder base or stand-alone as a sounder
- Cover plate (optional)
- Quick and simple to install
- Integral short circuit isolator
- First fix base
- Selectable tones controlled by the panel
- Adjustable volume controlled by the panel
- Single point connection for sensor and sounder (saving on both time and installation costs)
- Can be used with a sensor or stand alone
- Easy to maintain/service
-
Cranford Controls VocAlarm Voice Enhanced Sounder in Red
Cranford Conrols- Offers 32 electronic tones and high-quality digitized speech messages for clear communication
- Supports a two-stage alarm with an override or second tone and message for enhanced safety
- Available in various body styles, colors, and base options for flexible installation in different environments
-
Cranford Controls VocAlarm Voice Enhanced Sounder in White
Cranford Conrols- Offers 32 electronic tones and high-quality digitized speech messages stored on a micro SD card
- Provides an option for a two-stage alarm with an override or second tone and message
- Available in various styles and colors to suit different installation requirements, with shallow or deep bases for enhanced IP rating
-
Cranford Controls VTB Spatial Sounder & Beacon
Cranford Controls- 32 tones plus a selectable override tone.
- Shallow base IP43 and deep base IP65 versions available.
- Switch selectable beacon only feature.
- Unique twist and lock bayonet mounting system.
-
Cranford Controls VTG 24V Spatial Wall Sounder
Cranford ControlsKey Features
- Fully approved to EN54-3 by LPCB and VdS.
- 32 tones plus a selectable override tone.
- Shallow base IP21C and deep base IP33C versions available.
- Designed to work with both conventional and two-wire (SAV-WIRE ) systems.
- Unique twist and lock bayonet mounting system.
- Removable cover on deep base for surface wiring.
- Features base locking system as standard.
-
CXL Universal Call Point
Fulleon- Choice of Glass or Plastic Elements
- Changeover Contacts
- Flag on Re-Settable Element
- 470/680 Ohm Resistors
-
Discovery Marine Manual Call Point
Apollo- Flashing LED option to indicate polling (Discovery systems only)
- ‘Plug and Play’ terminal connections for fast wiring
- Continuity link for wiring test before commissioning
- Reports an alarm in under 0.2 seconds
- Resettable element
-
Discovery Marine Manual Call Point with Isolator
Apollo- Flashing LED option to indicate polling (Discovery systems only)
- ‘Plug and Play’ terminal connections for fast wiring
- Continuity link for wiring test before commissioning
- Reports an alarm in under 0.2 seconds
- Resettable element
-
Discovery Marine Waterproof Manual Call Point with Isolator
Apollo- ‘Plug and Play’ terminal connections for fast wiring
- Continuity link for wiring test before commissioning
- Reports an alarm in under 0.2 seconds
- Resettable element
-
Eaton Base Sounder VAD
Eaton- Certified to latest standard EN 54-23
- First fix base
- Fixing platform for most popular detectors
- Tamper proof cap for standalone use (supplied separately)
- For use with or without a detector
-
Eaton BiWire Ultra Manual Call Point
Eaton- Robust Construction
- Fast Fit Clip on Front Cover
- IP22 and IP66 Options
- Compatible with BiWire Accessories
-
Eaton CAB300 Intelligent Addressable Standard Base
Eaton- First fix base.
- Loop integrity switch.
- Multiple cable entry points.
-
Eaton CAS381 Intelligent Addressable Indoor or Weatherproof Wall Sounder
Eaton- Two models available; Internal or Weatherproof.
- Integral short circuit Isolator.
- High efficiency design.
- Simple clip fixing assembly.
- Low current consumption.
- Adjustable volume controlled by the panel.
-
Eaton Conventional Enhanced Optical Smoke Detector
Eaton- LPCB 3rd party approved / CPD approved
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
- New enhanced detectors feature Dual LEDs
- 1 x Receiver - receives the beam of infrared light
- Drift compensation and Chamber monitoring (Optical & Photo-Thermal)
- Part Codes - MPD821, CPD321, FXN533
-
Eaton Conventional Heat Detector
Eaton- Rate of rise, fixed at 77°C or fixed at 92°C models available.
- 360° visibility LED using lightpipe technology.
- Aesthetically pleasing.
- Quick and simple to install.