No
Know what you're looking for?
Filter Products
Manufacturer
Apollo(61)
C-Tec(9)
Cranford Conrols(2)
Cranford Controls(3)
Eaton(18)
Fike(14)
Fireco(1)
Fulleon(10)
Gent(7)
Geofire(2)
GST(4)
Hochiki(23)
KAC(2)
Klaxon(10)
Morley-IAS(3)
Moyne Roberts(1)
Nittan(19)
Notifier(1)
System Sensor(7)
Vimpex(9)
Zeta Alarms(36)
Ziton(11)
Type
Technology
Resolution
A Rating
Alarm In/Out
Anti-Fog
Audio In/Out
Auto Aligning
B Rating
Battery
Bluetooth Controller
Built-in Mic
Built-in Speaker
C Rating
Channels
Class A Holes
Class B Holes
Class C Holes
CO Testing
Codec
Colour
Black(12)
White(135)
Grey(1)
Ivory(10)
Red(65)
Red/Translucent(2)
Stainless Steel(1)
Translucent(4)
White/Translucent(2)
Yellow(1)
Detection Type
CO(1)
Heat(28)
Multi-Sensor(15)
Multi-Sensor & CO(2)
Smoke(24)
Device Type
Detector(67)
Bell(3)
Bell/VAD(1)
Manual Call Point(2)
Pillow Alarm(3)
Sounder(42)
Sounder/Beacon(1)
Sounder/VAD(17)
Sounder/VID(17)
VAD(11)
VID(15)
Voice Sounder(2)
Direction
Environment
Indoor(135)
Indoor/Outdoor(2)
Outdoor(63)
IR Range
Extinguisher Type
F Rating
Face Detection
Fast Fix Base
First Aid
Hazardous Applications
No(185)
Yes(10)
Head Removal
Heat Testing
Interconnectable
Lens
Lines
Low Level Controller
Marine Applications
Material
Max HDD Capacity
Max Loops
Maximum Record Resolution
Minimum Distance
Monitor Outputs
Networkable
Optical Zoom
Photoluminescent
Pipework Diameter
PoE Ports
Power
Protocol
Zeta Standard(1)
Core(2)
Discovery(5)
Eaton(3)
ESP(9)
Evolutiom(1)
Evolution(8)
Fike(6)
GENT by Honeywell(1)
Morley-IAS(2)
NOTIFIER by Honeywell(1)
Protocol 800(2)
Sensortec(1)
Series 200 Advanced(5)
Sita(1)
XP95(18)
XP95/Discovery(4)
XP95/Discovery/Core(2)
Zata Standard(2)
Zeta MKI(1)
Zeta MKII(10)
Zeta MKII/Zeta MKI(1)
ZP7(5)
Range
Reach
Relay
Yes(5)
No(37)
Remote Control Test
Self-Test
Series
Short Circuit Isolator
No(96)
Yes(46)
Sign Type
Size
Smoke Testing
Stimulus Type
System Type
Conventional(102)
2-Wire(12)
Acoustic(3)
Addressable(136)
Addressable/Conventional(1)
Touchscreen
Wireless Interlink
Showing 201–250 of 254 results
-
Notifier NFXI-OPT Opal Addressable Smoke Detector
Notifier- Built in short circuit isolation.
- New advanced Opal protocol allows mapping of the loop for precise fault location using isolators.
- Tri colour LED offering red, green and amber colours.
- Rotary decade address switches.
-
Orbis A1R Heat Detector
Apollo- TimeSaver Base designed for fast installation
- StartUp for fast commissioning
- FasTest reduces maintenance time
- Automatic drift compensation, with DirtAlert warning to easily identify dirty detectors
- Can be used for applications where smoke detectors are unsuitable
- Ideal in environments that are dirty or smoky under normal conditions
- Red flashing LED at StartUp confirms the device is operating
- SensAlert®, yellow flashing LED indicates faulty operation
- FasTest® takes just four seconds to test and confirm detectors are functioning correctly
- multisensor smoke detector for detecting fast-burning fires
- flashing LED option
- Warranty: 10 year
-
Orbis Intrinsically Safe (IS) TimeSaver Base
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
-
Orbis Multisensor Detector
Apollo- Orbis conventional multisensor smoke detector.
- TimeSaver Base designed for fast installation.
- StartUp for fast commissioning.
- FasTest reduces maintenance time.
- Automatic drift compensation, with DirtAlert warning to easily identify dirty detectors.
-
Orbis TimeSaver Base with Continuity Switch
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Product Depth - 20mm
- Product Diameter - 100mm
-
Roshni Low Profile (RoLP) Conventional Fire Alarm Sounder
Fulleon- 102dB(A) sound output
- 32 tones (user selectable)
- Optional deep base
- Two stage alarm
- Automatic synchronisation
-
Rotary Fire Alarm Bell
Moyne RobertsRotary Fire Alarm Bell
With a tried and tested robust design, this hand operated fire bell is suitable for use in hazardous locations or areas without a power supply. The bell has a pre-drilled flange for easy fitting, an aluminium base plate and red dome.
- Suitable for internal and external use
- Sound output: 60dB at up to 35m
- Quick and simple to install
-
Sita ASD Addressable Multipoint Detector With Optional Sounder And Strobe
Fike- Multi-mode detector offering 6 detection modes.
- Available with integral sounder and strobe.
- Compatiable with all Fike addressable panels including the CIE-A-200.
-
Solista LX – Wall Fire Visual Alarm Device (VAD)
Eaton- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Solista LX Conventional Ceiling Mounted VAD
Eaton- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Sonos Conventional Sounder & LED Beacon
Klaxon- Low current LED beacon.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65 (deep base units).
- Choice of lens colours.
- Sounder and beacon can be controlled separately.
- Tone and volume can be preset or adjusted off-base - 20dB.
- Separate connections for sounder & beacon.
-
Sonos Conventional Sounder in Red or White
Klaxon- Wide voltage range.
- Simple ‘First Fix’ installation.
- 32 tones.
- Tone and volume can be preset or adjusted off-base.
- Weatherproof to IP65 (deep base units).
- Synchronised alarm tones.
- Volume control - 20dB.
-
Sonos High Power 5J Xenon Beacon
Klaxon- High output 5J xenon beacon.
- 10-60V DC or 110/230V AC.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65.
- Synchronised flash (DC version).
- Single/double flash (DC version).
- No surge current.
-
Sonos LED Beacon
Klaxon- High efficiency LED beacon consumes less than 5mA.
- Simple ‘First Fix’ installation (no second fix wiring).
- Weatherproof to IP65 (deep base units).
- Synchronised flash.
-
Sonos Open Area Beacon with Isolator
Apollo- For use with XP95 & Discovery systems
- Self-test fault monitoring
- IP65 rated
- Individual and group addressing
- Sycronisation of flashes
- Comes with Isolating Base as standard
- Loop-powered
- Red and clear lens options
-
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
Klaxon- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD
Klaxon- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD Beacon with Sounder
Klaxon- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
-
Soteria SA5000-400 Heat Detector
Apollo- Soteria heat detectors with heat clasifications A1R, A2R, A2S, BR, BS, CR or CS.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
Soteria SA5000-600 Optical Smoke Detector
Apollo- Enhanced reliability of smoke detection.
- Reduction in false alarms.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
StroBell Combined Fire Alarm Bell With White LED Beacon
Vimpex- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Familiar installation method
- Low current consumption
- Single point of installation minimises wiring andassociated costs
- Strobe synchronisation with no additional wiring (synchronisation not covered by approval
- Can be wired as a two stage alarm, with both bell and visual alarm on separate circuits (not approved in this configuration)
-
Syrex Intrinsically Safe Sounder Beacon
Klaxon- Sounder Only, Beacon Only and Sounder Beacon Options Available
- Rated for Category 1
- Choice of Lens Options
- Weatherproof to IP65
-
System Sensor 22051TE-26 Low Profile Addressable Multi-Sensor
System Sensor- System Sensor two sensor multi-criteria fire detector incorporating photoelectric and thermal sensing elements.
- New mechanical platform with revolutionary chamber.
-
System Sensor 52051 Low Profile Addressable Heat Sensor
System Sensor- Low profile System Sensor addressable heat detector.
- 58°C fixed temperature and rate of rise (Class A1R), 58°C fixed (Class A1S) and 78°C fixed (Class BS) available.
-
System Sensor Addressable Indoor Manual Call Point
System Sensor- Addressable System Sensor MCP
- Suitable for indoor applications
- Resettable element
- No short-circuit isolator
-
System Sensor B501AP Addressable Mounting Base
System Sensor- System Sensor addressble sensor base with SEMS screw connections and address identification label.
-
System Sensor BSO-PP-N00 & I00 Addressable Base Sounder with Optional Isolator
System Sensor- Addressable base sounder for System Sensor protocol.
- Available with optional short-circuit isolator.
-
System Sensor DSS-PC-N00 & I00 Addressable Base Sounder & VAD with Optional Isolator
System Sensor- High output LED technology ensures optimum light output and low power requirements.
- High efficiency piezo disk and horn profile generate powerful sound output.
- Features Advanced protocol controllable sound output, tone selection, group polling, independent sound or strobe function
- Automatic synchronization of sounder and strobe
- Large cable access
- Rear or surface cable entry
- Loop continuity spring
- Simple twist fit onto universal B501AP base (positive “poke yoke” engagement)
- Anti-tamper feature
- In-built isolation options
- Address tag for clear indication
- Single point of installation – saves time, cost & inventory
- Low current draw enables more devices on loop
- Adjustable volume control (on device or from panel)
- Rotary wheels for clear address indication
- Clear lens with red flash
-
System Sensor Low Profile Addressable Optical Smoke Sensor
System Sensor- Low profile System Sensor optical smoke detector.
- Revolutionary chamber offering improved false alarm immunity.
-
Vimpex Identifire IDBTS Base Sounder with Cover
VimpexKey Features
- 32 Tones
- EN 54-3 tested and fully approved in accordance with CPR
- Slimmest profile in the industry
- Low current consumption
- Omni-directional sound
- Front plate for stand-alone use available
- Four selectable volume levels
- Installer friendly terminals
- Ceiling or wall mounting
- Robust and easily connected ‘two in two out’ 2.5mm terminals
-
VXB & VTB Conventional Visual Alarm Device with Optional Sounder
Cranford Controls- Approved to EN54-3(Sounder) and EN54-23(VAD Beacon).
- White flash(C-2.4-8), red flash (C-2.4-7) options available.
- 32 selectable tones.
- Body colour options available – red or white.
- Deep base variants independently certified to IP65.
-
XP95 Category W EN 54-23 Visual Alarm Device with Red or White Body
Apollo- Uses high intensity LED (white flash only).
- EN 54-23 Compliant Category W. VAD.
- Coverage W-2.4-6.
- Automatic LED check when VAD activated.
-
XPERT 8 SA5000-200 Intelligent Mounting Base
Apollo- Compatibility with Soteria, Discovery and XP95 detectors.
- Isolated and Non-isolated devices supported.
- Isolated wiper - maintains loop connectivity during temporary removal of devices.
- Supplied with XPERT 8 Card for CoreProtocol®.
- ‘E-Z Fit’ allows for simple mounting of the detector base after wiring.
- Base mark allows for LED detector alignment.
-
Xtratone Conventional Combined Wall Sounder Beacon
Zeta Alarms- Complies with EN54 Part 3 Type A
- 102dB @ 1m sound output
- 22 Tone patterns (site selectable)
- Flush or surface fixing
- Housed in UL V0 flame retardant ABS
- 4 x 20mm cable entries (2 top, 2 bottom)
- First fix, wire to back box technology
- Flashing Rate 0.5Hz
-
YBN-R/3 Hochiki ESP Sensor Mounting Base in Ivory, White or Black
Hochiki- Common mounting base for Hochiki ESP range of detectors
- Available in Ivory, White or Black
-
YBO-R/SCI Hochiki ESP Short Circuit Sounder Mounting Base in Red or White
Hochiki- Features short circuit isolator
- Designed for use with Hochiki ESP CHQ-WS2 and CHQ-WSB sounders
- Available in Red or White
-
Zeta CP3 Addressable Manual Call Point
Zeta Alarms- Available in both indoor & ourdoor (IP67) versions
- Supplied with back box for surface mounting
Low Stock
-
Zeta CP3 Conventional Manual Call Point
Zeta Alarms- EN54-11 approved conventional manual call point
- Surface mounted (includes back box) or flush mounted with optional bezel
- Positive activation that mimics the feel of breaking glass
- Simple key to reset operating element - no broken glass
Low Stock
-
Zeta CP4 Conventional Surface or Flush Manual Call Point
Zeta Alarms- EN54-11 approved.
- Very high visibility of the alarm condition.
- New efficient and reliable mechanism.
- High impact resistant ABS glass fiber material Fully patented.
- Quick and Easy Installation.
-
Zeta Mark 1 Addressable Common Sounder Flasher Base c/w Isolator
Zeta AlarmsThe CSB sounder base has been designed to achieve a higher number of units to be accomodated on the loop. A maximum of 64 units are now loop powered accross the whole range of Zeta Analogue Addressable panels.
-
Ziton Addressable Base Sounder in Polar White
Ziton- Detector and sounder from a single wiring point – minimising installation costs
- Powered directly from the ZP loop
- Up to 60 detectors with sounders directly on the loop
- Separate addresses selectable for detector and sounder
- High efficiency sound gun transducer
- Compatible with all ZP loop devices
- Laser alignment aid in the receiver head
- Wide range of international sound types and frequencies
- EN54:3 approved and CPR certified
-
Ziton SPB-2 Addressable Sounder Base in Red or White
Ziton- Pluggable base for ZP755 sounder.
- First fix facility.
- Ease of installation.
- Large wiring terminals.
-
Ziton SPB-2P Plugable Base for ZP755 Sounder in White
Ziton- Ease of installation
- First fix facility
- Large wiring terinals
-
Ziton Z600 Series Conventional Heat Detector
Ziton- Aproved to EN54 Parts 5 and CPD Certified
- Low profile conventional design
- Head out continuity support
- Range of surface bases
- Plug in base with automatic locking
-
Ziton ZP7 Weatherproof Addressable Manual Call Point
Ziton- IP67 rating for outdoor applications
- Resettable or frangible operating elements
- Single maintenance tool
- Plug in loop connection
-
Ziton ZP7-SB1-P Standard Base for ZP7 Detectors
Ziton- Common to all ZP7 series detectors.
- Automatic locking option.
- Address identification label.
- Easy to install.
-
Ziton ZP720-3P ZP7 Addressable Heat Detector
Ziton- Analogue sensing - reduces false and unwanted alarms.
- Addressable - system knows the status and location of every sensor.
- Automatic self test.
- EN54 Part 5 approved and CPD certified.