Shop
This is where you can browse products in this store.
Know what you're looking for?
Filter Products
Showing 301–350 of 2241 results
-
Apollo Orbis Timesaver Detector Base With Diode
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Continuity link for voltage testing of zone wiring prior to commissioning
- Other devices continue to work during unauthorised removal of detectors
-
Apollo Orbis TimeSaver Sav-Wire Base
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Is used in 'Sav-Wire' systems
-
Apollo SA7800-870 Intelligent Test Set
ApolloKey Features
- Loop connection ports for individual addressing or fault finding
- Enables loop integrity and diagnostics testing during commissioning and maintenance
- View device information and control functionality modes
- Internal battery for portability. Can be charged with supplied mains charger
- Touch screen display
- Works with XP95, Discovery and CoreProtocol ranges
-
Apollo SC2900-001 Conventional Manual Call Point
Apollo- Resettable operating element.
- Easy access, front reset mechanism.
- Ergonomic reset key.
- EN54-11 certified.
- 170° viewable LED.
- Suitable for flush or surface mouting.
- Optional hinged cover.
-
Apollo Series 65 12V DC Relay Base
Apollo- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
- Can be used in fire and security systems
-
Apollo Series 65 Base Mounted UV Flame Detector
Apollo- Responds to stationary flames with no flicker
- Sensitive to UV radiation emitted by flames during combustion
- Compact flame detector which fits into Series 65 bases
- Zone-powered
-
Apollo Series 65 Conventional Heat Detector
Apollo- Series 65 conventional heat detector.
- Choice of 4 heat classes.
- Ideal for environments that are dirty or smoky under normal circumstances.
In Stock
£10.90 – £11.73 This product has multiple variants. The options may be chosen on the product page -
Apollo Series 65 Diode Base
Apollo- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 End-of-Line Relay Base
Apollo- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
Apollo Series 65 Ionisation Smoke Detector
ApolloThe Apollo Series 65 Ionisation Smoke Detector uses twin compensating chambers and an Americium 241 radioactive source to detect smoke.
-
Apollo Series 65 Optical Smoke Detector
ApolloThe Apollo Series 65 Optical Smoke Detector has a external LED for easy identification. 3 consecutive optical smoke detector sensor activations are required to trigger an alarm state. -
Apollo Series 65 or XP95 Base Cover
Apollo- Protects base when the detector is not in place.
- Aesthetically pleasing.
In Stock
£3.30 This product has multiple variants. The options may be chosen on the product page -
Apollo Series 65 Sav-wire Base
Apollo- Allows Series 65 conventional detection to work on Sav-Wire panels
- Detector locking mechanism
- Contains an earth connector
- Easy to wire
-
Apollo Series 65 Standard Base
Apollo- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 Standard Relay Base
Apollo- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
Apollo Stainless Steel Adjustable Mounting Bracket
ApolloEnter a brief description of your product here. This description will be displayed on product list pages.
-
Apollo Universal XPERT Address Card
Apollo- Allows the same card to be used on both, XPERT 7 & XPERT 8 bases.
- Includes 128th pip for CoreProtocol systems.
- Address pips have additional lead-in for a higher tolerance.
- Simplifies and speeds up installation and commissioning.
- Address remains the same, no matter how often the detectors are replaced.
In Stock
£0.25 – £6.25 This product has multiple variants. The options may be chosen on the product page -
Apollo Waterproof Base Cover
ApolloEnter a brief description of your product here. This description will be displayed on product list pages.
-
Apollo Weatherproof Multi-Tone Open-Area Sounder Visual Indicator with Isolator (Red)
Apollo- Choice of tones on standard device: Apollo, Slow Whoop, and DIN.
- IP66 rated.
- Two Volume settings 92dB(A) and 100dB(A).
- Synchronisation of 'alert' and 'evacuate' tones.
- Individual and group addressing.
- Built in isolator.
-
Apollo XP95 3 Channel Input/Output Unit
Apollo- Uses a single address.
- Allows independent monitoring of input channels.
- Allows independent control of output relays.
-
Apollo XP95 Addressable Call Point with Isolator
Apollo- EN54-11 Approved (EN54-17 Approved for Isolator version)
- E-Z fit connectors
- Front facing addressing without the need to detach the backbox
- A unique, ergonomically designed key for resetting and front cover removal
- Backward compatibility and retro-fit
- Resettable element
-
Apollo XP95 Addressable Output Unit
Apollo- The Output Unit provides a voltage free single pole, changeover relay output.
- It is a simplified version of the Input/Output Unit without circuitry for monitoring inputs.
-
Apollo XP95 Addressable VAD Sounder Base
Apollo- EN54-23 Approved VAD
- Two volume ranges 55-75dB(A) and 75-91dB(A)
- Visual indicator flash rate of once per second
- Synchronisation of 'alert' and 'evacuate' tones
- Synchronisation of visual indicator flash
- Individual and group addressing
- Unique acoustic and visual indicator self-test
- Built-in Isolator
-
Apollo XP95 Ancillary Base Sounder
Apollo- For use on an XP95/Discovery systems.
- Sound output of 85dB(A) at 1 metre.
- Current consumption of only 3mA.
- Loop-powered.
- Responds to signals from the associated detector – does not have an address of its own.
-
Apollo XP95 and Discovery Transparent Manual Call Point Hinged Cover
Apollo- Prevents Accidental Enable
- Fits XP95 and Discovery Call Points
-
Apollo XP95 Blanking Cap For Base Sounders
Apollo- Blanking cap for XP95 sounder or combined sounder & flasher bases.
- Suitable for applications where no detector is required.
- Available in either red or white.
In Stock
£2.55 – £2.60 This product has multiple variants. The options may be chosen on the product page -
Apollo XP95 DIN-Rail Dual Isolator
Apollo- Loop-powered
- Polarity sensitive
- Up to 20 detectors can be installed between isolators
- Allows fully isolated spurs
-
Apollo XP95 DIN-Rail Mains Switching Input / Output Unit
Apollo- It can report fault, switch open and switch closed levels
- Three visible LEDs
- Capable of switching up to 8A at 250V AC
- Fits a standard 35mm DIN-Rail
-
Apollo XP95 DIN-Rail Sounder Controller (5 Amperes)
Apollo- Allows sounders to be operated continuously or be pulsed, 1 second on, 1 second off
- May be synchronised with loop sounders
- An opto-coupled input is provided to monitor the state of the external power supply
- Features group addressing
- Will accept a load of up to 5A
-
Apollo XP95 Heat Detector
Apollo- Ideal in environments that are dirty or smoky under normal conditions
- Well-suited to warehouses, loading bays and car parks
- Unaffected by wind or atmospheric pressure
-
Apollo XP95 High Temperature Heat Detector
Apollo- Ideal in environments that are dirty or smoky under natural conditions
- Well suited for warehouses, loading bays and car-parks
- Unaffected by wind or atmospheric pressure
-
Apollo XP95 I.S MEDC Manual Call Point
Apollo- Robust design
- Waterproof
- Reports an alarm in under 0.2 seconds
-
Apollo XP95 I.S. Heat Detector
Apollo- Rate of rise and fixed temperature alarm point.
- Single thermistor technology.
- Transient voltage protection.
- Resettable operation.
- Lockable security fitting.
-
Apollo XP95 I.S. Ionisation Smoke Detector
Apollo- Detects superheating and flaming combustibles.
- Dual-chamber technology.
- Wind resistant smoke inlets.
- Transient voltage protection./li>
- Fine gauze insect protection.
- Lockable security fitting.
- Must be connected to a suitable safety barrier and protocol translator.
-
Apollo XP95 I.S. Manual Call Point
Apollo- Reports an alarm in under 0.2 seconds
- Waterproof
- IP67
- Designed for ‘explosive mixture’ atmosphere
Low Stock
£153.64 – £156.59 This product has multiple variants. The options may be chosen on the product page -
Apollo XP95 I.S. Mounting Base
Apollo- Wide cable entry
- Contains no electronic parts
- ‘One way only’ fit
- Low insertion force
- Large terminations
- Lockable security fitting
- White finish.
- Must be connected to a suitable safety barrier and protocol translator.
-
Apollo XP95 Input/Output Unit With Isolator
ApolloThe Apollo XP95 Input/Output Unit provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.
-
Apollo XP95 Integrated Base Sounder with Optional Isolator
Apollo- Two tones.
- Two volume ranges 55-75dB(A) and 75-91dB(A).
- Individual and group addressing.
- Unique acoustic self-test.
- Optional built-in isolator.
In Stock
£28.38 – £30.24 This product has multiple variants. The options may be chosen on the product page -
Apollo XP95 Integrated Sounder & Beacon Base with optional Isolator
ApolloAn integrated sounder base unit with additional synchronised beacon and an isolater. For use with Apollo XP95 detectors.
In Stock
£44.34 – £44.63 This product has multiple variants. The options may be chosen on the product page -
Apollo XP95 Intelligent Deep Base
ApolloCompatible with all Apollo XP95 detectors, the Intelligent Deep Base has extra depth to allow cable-insertion through the side of the base.
-
Apollo XP95 Intelligent Heater Base
ApolloThe Intelligent Heater Base protects your Apollo XP95 detectors from environmental factors like icing and condensation.
-
Apollo XP95 Intelligent Isolator
ApolloThe XP95 Intelligent Isolator can be used in addressable fire alarm system loops to prevent short-circuit disruptions.
-
Apollo XP95 Intelligent Isolator Base
ApolloThis base is required to add the Apollo XP95 Intelligent Isolator to your fire alarm system.
-
Apollo XP95 Intelligent Mounting Base in White or Black
Apollo- XPERT Addressing.
- One way fit of detector.
- Locking feature to prevent unauthorised detector removal.
In Stock
£2.09 – £6.25 This product has multiple variants. The options may be chosen on the product page -
Apollo XP95 Intelligent Open-Area Sounder
ApolloThe Apollo XP95 open-area sounder is a weatherproof (IP65), loop powered sounder with an output of up to 100dB.
In Stock
£33.80 – £36.75 This product has multiple variants. The options may be chosen on the product page -
Apollo XP95 Intelligent Open-Area Sounder Beacon With Red or Clear Lens
Apollo- Three tones on standard devices; Apollo, Slow Whoop and DIN – all of which comply with EN54–3:2001.
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of tones and flashes.
- Individual & group addressing.
- Built-in isolator (EN54 versions only).
- Wire-to-base for simple interchange of device.
- Device locking facility.
In Stock
£61.56 – £68.06 This product has multiple variants. The options may be chosen on the product page -
Apollo XP95 Intelligent Twin Switch Monitor
Apollo- Twin switch montor for Apollo intelligent systems.
- Improved design for ease of wiring meaning faster installation.
- Contains controllable isolator.
- Address range 1 - 254.
- Five pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems.
-
Apollo XP95 Ionisation Smoke Detector
ApolloThis robust ionisation smoke detector monitors the chemical composition of the air in its environment and will trigger an alarm when smoke enter the detector chamber.
-
Apollo XP95 Isolating Base
ApolloThe XP95 Isolating Base isolates short circuits in the addressable loop while allowing the associated detector to remain active.
-
Apollo XP95 Loop Powered VAD, White Body, White Flash, Ceiling Category
Apollo- Uses high intensity LED.
- EN 54-23 Compliant Category C VAD.
- Flash rate 0.5Hz.
- Fault signal if LED check failed.