Fire Alarms
Fire alarms are a critical life safety system and an essential part of protecting your home or business. They can help to detect dangerous circumstances involving fire and provide warning. There are various types of fire alarm systems available that will suit different types of property, so it’s important to choose the right one for your needs. We have a selection below that will suit all budgets and requirements. Our range includes both wired and wireless options, which means they can be installed in any type of property without requiring complicated wiring work or expensive installation costs. If you need more information about our products, please get in touch with us today! We’re happy to answer any questions you may have about our fire detection range.
Know what you're looking for?
Showing 51–100 of 1154 results
-
ACT 1414 24V Spike Suppressor
ACT Meters- Protects fire alarm system from induced AC and nearby lightning
- Decouples induced AC from every alarm cable connected to the control panel
- Clamps the 24VDC supply against spikes
-
ACT 230MSF 230V EMI RFI Mains Filter
ACT Meters- Protects against EMI/RFI and nearby lightning via the 230VAC mains supply.
- Clamps induced mains spikes.
- Suppresses radio frequency interference.
- Protects equipment on a continuous basis.
-
ACT 2323 230V Mainspike Suppressor
ACT Meters- Provides up to 4,500 Amp continuous spike protection across live, neutral and Earth.
- Protects against nearby lightning causing false alarms and system malfunctions.
- Protects all security and fire alarm panels, CCTV cameras, access control equipment and security lighting.
-
ACT 6000 Alarm Engineers Autoranging Digital Multimeter
ACT Meters- Fully autoranging.
- Both AC and DC voltage measurement.
- Three ranges are provided for current measurement of either AC or DC current.
- Simple operation.
-
ACT 612 6V or 12V Intelligent Battery Tester
ACT Meters- Test SLA, GEL & FLOODED.
- For 6V & 12V battery models.
- Simple Operation.
- DC Voltage and Ah Capacity Results.
- When to Recharge or Replace.
-
ACT CPS3 Fire Alarm Control Panel Suppression Kit
ACT Meters- Protects metal fire alarm control panels from EMI, RFI and nearby lightning.
- Recommended to fit this kit as standard on all take-overs.
-
ActiV Conventional Heat Smoke Detector
C-Tec- Third-party certified to EN54-5 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
- Wide 6-33V DC operating voltage
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility
- Sophisticated onboard detection algorithms help reduce false alarms by rejecting momentary abnormal readings
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases (all bases include an integrated detector/base locking mechanism and ID tag)
- Class A2 fixed heat, class B fixed heat, optical and multi-sensor variants also available
-
ActiV Conventional Multi-Sensor Fire Detector
C-Tec- A high-quality combined optical + heat multi-sensor offering outstanding detection performance at a very competitive price
- Third-party certified to EN54-5 & 7 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
- Wide 6-33V DC operating voltage
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility
- Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases (all bases include an integrated detector/base locking mechanism and ID tag)
- Class A1 fixed heat, class B fixed heat, class A1R rate-of-rise and optical variants also available
-
ActiV Conventional Optical Smoke Detector
C-Tec- A high-quality optical smoke detector offering outstanding detection performance at a very competitive price.
- Manufactured by C-TEC in the UK.
- Third-party certified to EN54-7 by Intertek.
- Wide 6-33V DC operating voltage.
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
- Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels allowing a greater than 8 year life-span.
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.
-
ActiV Mounting Base
C-Tec- Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors
- Easy to fit with lots of working space
- Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors
- Integrated detector/base locking mechanism, head removal tool and ID tag
- Simple ‘click and twist’ design
- Remote LED terminals for the optional connection to a BF318 Remote indicator
- Bright tin plated steel terminals can accept fire rated cable of up to 2.5mm in diameter
- C4408D diode and C4408 non-diode bases available*
- Compatible with C-TEC’s entire range of ActiV conventional smoke and heat detectors
-
ActiV Relay Base with Diode
C-Tec- Includes a 1A @ 24 VDC relay controlled by detector’s remote LED output
- Ideal for switching CCTV, security and door retaining systems
- Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors
- Easy to fit with lots of working space
- Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors
- Integrated detector/base locking mechanism, head removal tool and ID tag
- Simple ‘click and twist’ design
- Remote LED terminals for the optional connection to a BF318 Remote indicator
- C4408R non-diode relay base also available for use on systems that do not require head out monitoring
-
Addressable Maxitone Sounder Red or White
Zeta Alarms- Available in Red Or White
- 2 Available Tones
- Addressable
- IP65 Ingress Protection
Low Stock
-
Addressable Remote Indicator (10 Address)
Zeta AlarmsOn modern addressable fire alarm systems, the remote output of a detector may often be unavailable because it is used for another purpose, to drive a sounder base, or a relay base for example
Low Stock
-
Addressable Remote Indicator LED (1 Address)
Zeta AlarmsOn modern addressable fire alarm systems, the remote output of a detector may often be unavailable because it is used for another purpose, to drive a sounder base, or a relay base for example
Low Stock
-
ADP324-FR 24V DC Power Supply Unit
CQR- 24V DC 1A nominal output.
- Attractive, tough steel housing.
- Easily visible, green LED to indicate mains/operational status.
- Tough, powder coated, 1.5 mm steel construction, painted white (RAL9003).
- CE marked.
- Opto-Relay output for remote signaling of faults.
- Anti-surge protection.
- When used for powering for fire system magnetic door retainers each requiring 24V DC 50mA, a single D2401-AA can drive 16 units or 8 x double doors.
- Ample provision for cabling.
- Fitted with 12mm, 16mm & 20mm knockouts, plus a 25 x 12mm trunking knockout.
- Hinged/pivoted lid, secured by a single screw for faster fitting and servicing
- Rounded corners to avoid dust traps and dirt build-ups.
- Can be fitted horizontally or vertically.
-
Advanced 1.5A, 3A or 5A Boxed Power Supply With Battery Charging
Advanced- Approved EN54-4.
- Power and fault indication.
- 3 Year Warranty.
-
Advanced MxPro 5 Document Enclosure
Advanced- Designed for IP30 protection.
- AC terminal block and leads.
- Internal labelling.
- Hinge pins.
-
Advanced Spare Access Enable Key (Singular)
AdvancedEnter a brief description of your product here. This description will be displayed on product list pages.
Low Stock
-
Agrippa Acoustic Digital Pillow Alarm
Geofire- No installation.
- Portable device.
- Listen and learn technology.
- Flashing red LED visual warning.
-
Agrippa Chain Keeper
Geofire- Bridge a gap between door and magnet.
- One metre in length.
- Flexible.
- Can be cut to desired size.
-
Agrippa Deaf Alert Home Pillow Fire Alarm
Geofire- Easy to install and set up.
- Fail-safe dual power supply.
- Smoke alarm included.
- Vibrating pad to alert the deaf, hard of hearing, children, heavy sleepers or people on medication in the event of a fire.
-
Agrippa Door Holder Extension Bracket
Geofire- Swivel bracket to allow mounting in any plane.
- Supplied with fixings to suit door holder.
- Available in three lengths to suit specific location.
-
Agrippa Floor Mounting Bracket Kit
GeofireKey Features
- Dual orientation for door holder to face either way
- Supplied with fixings to suit door holder
- Sheet steel construction
- Powder coated white RAL9016
-
Agrippa Sound Activated Magnetic Fire Door Holder
Geofire- Battery powered and wire-free door holder.
- Listens and learns the sound of your specific fire alarm providing greater reliability.
- Hygenically and discreetly installed at the top of the door.
- LED display and low battery warning.
-
Agrippa Wire-Free Fire Door Closer
Geofire- Battery powered and wire free.
- Will not hold in the event of a battery power cut.
- Installed at the top of the door in place of a traditional closer.
- Daily time release option to close all fire doors at night.
- Red button opn unit to manually close fire doors.
-
Aico Ei168RC RadioLINK Base
Aico- Mains powered base with rechargeable lithium cell back up.
- Add this to the 140RC series alarms for RadioLINK wireless interconnection.
- Compatible with other Aico wireless interconnection products.
- Eliminates tricky wiring runs.
- Saves time, mess and
- Makes it easier to add in new alarms and accessories.
-
Aico Ei3000MRF SmartLINK Module
Aico- Powered from alarm head.
- Interconnect up to 12 alarms and devices wirelessly.
- Real-time configurable notifications.
- Full visibility of your connected SmartLINK systems.
- Forecast alarm replacements and maintenance.
- Remote Alarm Learn entry.
- Transmits, receives and repeats RF specific data.
- RF mesh architecture.
- Unique House Coding feature.
- RF Data Download.
-
Aico Ei3014 Heat Alarm
Aico- Contains a fast response thermistor heat sensor.
- Mains powered with 10 year rechargeable lithium cell back-up.
- Compatible with SmartLINK interconnection and monitoring technology.
- AudioLINK data extraction technology.
- easi-fit base.
- 10 year life.
-
Aico Ei603RF RadioLINK+ Battery Heat Alarm
Aico- Battery powered with a sealed in lithium battery.
- Easy to fit – twist on base and multi-fixings.
- 10 year life.
- Uses built-in RadioLINK+ technology for interconnection and data extraction.
- Connects wirelessly with all other Aico wireless interconnection products.
-
AlarmSense Alarm Relay
Apollo- Enables devices such as visual indicators, pillow/bed alarms and radio vibrating or paging devices to be connected to AlarmSense system
- Ensures DDA compliance
-
AlarmSense AlarmSense Heat Detector
Apollo- Can be used for applications where smoke detectors are unsuitable
- Two types available; fixed heat (CS) or rate-of-rise (A1R)
-
AlarmSense Base
Apollo- Standard AlarmSense base
- Detects the removal of a detector head and reports a fault
-
AlarmSense Open-Area Sounder
Apollo- IP65 rated
- Apollo tone - synchronised with AlarmSense sounders and sounder visual indicator bases
-
AlarmSense Open-Area Sounder Visual Indicator
Apollo- Synchronised flashing red LED on sounder visual indicators and visual indicators
- IP65 rated
- Apollo tone - synchronised with AlarmSense sounders and sounder visual indicator bases
-
AlarmSense Optical Smoke Detector
Apollo- Responds well to slow-burning, smouldering fires
- Well suited for bedrooms and escape routes
-
AlarmSense Sounder Base
Apollo- Compatable with complete range of AlarmSense detectors
- High and low volume ranges
-
AlarmSense Sounder Visual Indicators Base
Apollo- Audio and flasher base
- Sounder range between 70dB(A) and 87dB(A)
-
AOV System Logbook
Docs Store- Complete log book for smoke control or AOV systems.
- Logs essential details of your system.
-
Apollo 45681-204 Conduit Box
Apollo- Easy to install.
- Aesthetically pleasing.
- Colour matched to detector and base.
-
Apollo 45681-218 Deckhead Mounting Box Accessory Kit
Apollo- Deckhead mounting box accessory kit.
- Extension Sleeve and the Adaptor Ring for Deckhead Mounting Box.
-
Apollo 45681-233 Backplate
Apollo- Protects against water ingress.
- Improved performance.
- Fits Series 65, XP95, Orbis and Discovery bases.
-
Apollo 45681-238 Series 90 to XP95 Base Adapter
Apollo- Enables an existing range to be updated with ease.
- Eliminates the need for re-wiring.
-
Apollo 55000-274 XP95 Multi-Tone Weatherproof Open-Area Sounder
Apollo- Updated to include choice of tones: Apollo, slow whoop and DIN.
- Two volume settings 92dB(A) and 100dB(A).
- Synchronisation of tones.
- Individual and group addressing.
- Loop Powered.
- IP66 rated.
-
Apollo 58000-305 Discovery CO & Heat Multisensor Detector
Apollo- Responds to smouldering and flaming fires.
- Less susceptible to false alarms caused by steam and dust.
- Five response modes.
- Remote test feature.