Uncategorised
Know what you're looking for?
Filter Products
Showing 151–200 of 374 results
-
Firebeam Xtra Replacement Controller
The Fire Beam CompanyEnter a brief description of your product here. This description will be displayed on product list pages.
-
FireChief Flamebuster Bracket Green (500ml) or Black (750ml)
FirechiefEnter a brief description of your product here. This description will be displayed on product list pages.
-
FireChief Hand Sanitiser Gel
Firechief- Fast drying
- No water needed
- Contains 70% Alcohol
- 5 Litre bottle with dispensing pump
- Produced in UK
-
FireRay 2000 – End to End Infrared Optical Beam Smoke Detector
FFEKey Features
- Separate transmitter and receiver units
- Coverage 10 - 100m
- Adjustable sensitivity levels
- Ground level control unit
- Automatic self check drift compensation: The system monitors long term degradation due to build up of dirt on the optical surfaces
- Small unobtrusive transmitter and receiver heads
- Complies with BS5839 part 5
- World-wide approvals including VdS and UL
Low Stock
-
Fireray Commissioning And Maintenance Kit For Beam Detectors
FFE- Commissioning & maintenance kit for all Fireray beam detectors.
- Includes cleaning cloth.
-
Fireray Detector Adjustment Bracket
FFE- Adjustment bracket for use with Fireray One, End-to-End, Fireray 5000 and Fireray 3000.
- Provides 360° rotation plus up to 180° adjustment.
-
Fireray Reflector Long Range Ceiling Mount
FFE- Long range ceiling mount for Fireray reflectors.
- Pre drilled ceiling plate for easy installation.
- For use with four reflectors.
-
Fireray Reflector Short Range Ceiling Mount
FFE- Short range ceiling mount for Fireray reflectors.
- Pre drilled ceiling plate for easy installation.
-
Flamezorb Fire Extinguishing Absorbent Compound
Flamezorb- Flamezorb has superior absorbent properties compared to traditional sand
- Each bag has the capacity to fill a 10 litre capacity fire bucket
- Lightweight (only 2kg per bag)
- Easy to clear up and dispose
- Conforms to BS476 Part 7 Class 2
-
Flush Mount Bezel For Zeta CP3 or ID2 Manual Call Points
Zeta Alarms- Bezel to flush mount Zeta CP3 call point
- Compatable with ZT-CP3. ZT-CP3/AD or ID2-MCP
-
Flush Mounting Bezel for SigTEL Compact Controllers
C-Tec- Allows SigTEL Master & Expansion Controllers to be semi-flush mounted
- Attractive slimline design
- Finished in mild steel
- Front face when in situ measures 456 W x 293 H mm
- Hole required to accommodate the bezel and the Controller is 412 W x 255 H x 50 D mm
-
Four Prism Plate For Use With FFE Universal or Adjustment Bracket
FFE- Four prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
Fulleon Mains Module, Deep Base
Fulleon- Wide input voltage
- Many compatible products
- Red or white finish
- Surface fixing or conduct box mounting
- Suits most AC mains supply without adjustment
- Provides 24V products with extra flexibility
- Matches product finish
- Compatible with most wiring systems
-
Fyreye Common Base
Zeta AlarmsThe Fyreye common base is used on systems that don't need to keep line integrity on head removal, and also on addressable systems.
Low Stock
-
Fyreye Deep Common Base
Zeta AlarmsDeep back box suitable for surface mount cable termination of cables with trunking, conduit or glands.
Low Stock
-
Fyreye Diode Base
Zeta AlarmsThe Fyreye diode base is used on systems that do need line integrity on head removal. This would include all conventional systems that mix detectors & call points on the same line.
Low Stock
-
Fyreye MKII Addressable Detector Base – Black
Zeta AlarmsEnter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye MKII Diode Base
Zeta Alarms- Low profile mounting base for Fyreye MKII range of conventional detectors.
- Diode fitted to provide line integrity.
- Available in shallow or deep formats.
-
Fyreye MKII Diode Base in Black
Zeta Alarms- Low profile mounting base for Fyreye MKII range of conventional detectors.
- Diode fitted to provide line integrity.
- Available in shallow or deep formats.
-
Fyreye MKII Isolator Base
Zeta AlarmsEnter a brief description of your product here. This description will be displayed on product list pages.
-
Gent Obscuration Test Card Kit For Beam Detector
Gent- Manufacturer: Gent by Honeywell
- Obscuration Test Card Kit
- For Use With Beam Detectors
-
Gent Square Replacement Glass (Pack of 10)
Gent- For use with the "Old Style" Square Gent Call Points
- Dimensions: 68 x 62 x 2mm
- Manufacturer: Gent by Honeywell
-
Gent Vigilon Call Point Cover
GentKey Features
- Manufacturer: Gent by Honeywell
- Designed for use with the Gent Vigilon Call Points
- Hinged Design For Access To Call Point Element
- Made from Polycarbonate Plastic
- Helps prevent accidental & malicious alarm activations
-
Gent XENS-SPARES Spares Pack For Xenex Panels
Gent- Spare pack for Gent Xenex panels.
- Includes EOLs, battery link, screws and fuses.
-
Graphite Intumescent Sleeve For Deedlock Double Magnet
CQR- Pair of intumescent sleeves which fit around the armature bolts of Deedlock double maget.
- Provides protection for 60 or 30 minute fire doors.
-
Graphite Intumescent Sleeve For Deedlock Single Magnet
CQR- Intumescent sleeve fits around the armature bolt of Deedlock single maget.
- Provides protection for 60 or 30 minute fire doors.
-
Haes 4 Way Sounder Circuit Extension Card
HaesEnter a brief description of your product here. This description will be displayed on product list pages.
-
Haes 8 Way Output Card For Conventional Panels
HaesKey Features
- 8 x switched -ve outputs
- 8 x volt free changeover relay outputs plus 8 x switch -ve outputs
- Common or zonal operation
- Link up to 4 cards
- Simple DIL switch configuration
-
Haes Excel-EN Network Card
Haes- Network up to 8 control panels
- Add up to 8 repeater panels to the network
- Card also includes 6 programmable switch -ve outputs
-
Haes Replacement Keyswitch Assembly For Esento Evoque, Excel, Eclipse Esprint & Fusion
HaesKey Features
- Replacement / spare key and lock
- Ideal for Haes fire alarm panel doors
- Old part number: SWK107WIRED
-
HobWatcher Automatic Hob Isolator System
Hoyles- Single compact unit for ease of installation
- Hob run timer preset at 10 minutes
- Protects vulnerable kitchen users
- Protects distracted kitchen users
- Reduces risk of kitchen fires
- Isolates a load of up to 7.5KW
- Visual power on indication
- Audible and visual power isolation warning
- Audible and visual Reset
- Selectable cooking times
- Option for extractor fan control
- Anti tamper features
- Dimensions 180(l)x100(h)x50(d)mm.
-
Hochiki CDX Conventional Mounting Base in Ivory or White
Hochiki- Integeral Remote Indicator Output
- Low Profile
- Rugged Design
- Accepts 2.5mm Cable
-
Hochiki CDX Conventional Photoelectric Smoke Detector
Hochiki- Removeable High Performance Chamber
- Remote Indicator Output
- Low Profile Design
- Available in White
Low Stock
-
Hochiki PL-2 Legacy Device Programming Lead Programming Lead (Jack Plug to Croc Clip)
Hochiki- Allows Hochiki TCH-B200 to program legacy ESP devices.
-
Hochiki PL-3 Additional Programming Lead 3 Way Connection
Hochiki- For use with Hochiki devices with square connector
- Allows connection of TCH-B200 programmer
-
Hochiki SI/CAP2 Base Sounder or Isolator Cover
Hochiki- Protects wiring terminals on isolator bases and base sounders
- Easy to fit
- Available in Ivory or White
-
Hochiki SR/Y Mounting Box for Hochiki Manual Call Points
Hochiki- For surface mounting of the HCP call points
- Standard red or Yellow
- 32mm deep
-
Hot Work Kit
Firechief- Includes 2kg ABC powder fire extinguisher (approved to BSEN3).
- Includes K40 1.2 x 1.8m high performance fire blanket.
- Plastic pocket for storage of Hot Work Permit forms.
- Rolls up into an easy to carry, easy to store bag ready to take onto site.
-
Howler Site Alert RF Heat Detector
HowlerKey Features
- Simple to configure and re-configure using dip switches
- Powered using easily sourced, low cost alkaling batteries
- Disconnection and battery status reflected by the site alert RF master unit
- Radio linked via the master unit to manual call points
- Can link to 31 units
- Radio frequency with 868 Mhz class 1 receiver
- Battery Operated - no mains power required
- Weatherproof design
-
Howler Site Alert RF Wireless Site Alarm
Howler- Wireless Linking - Up to 30 units can be linked – no trailing wires
- Weatherproof - Push on/push off switch operation
- Loud - 100dB at 1 metre.
-
Internal Printer Module Kit For Morley ZX Panels
Morley-IAS- Internal printer kit for Morley ZX5e panel
- Provides 40 character printer output
-
Intumescent for FD30 & FD60 Timber Fire Doors to suit AL900
CQR- Fire rated for use on 30 min timber doors to EN 1634 opening inward and outward – Fire Assessment Report No WF 419607 by Warrington Fire.
- Fire rated for use on 60 min timber doors to BS 476 (Report with GE Door Manufacturer).
-
KAC Call Point Cover Seal – Pack of 5
KACKey Features
- Call Point Cover Anti Tamper Seals
- For Use With The New Type KAC Call Points and Covers
- Pack of 5
-
KAC Plastic Resettable Element For Call Points
KAC- Compatible with the New Type KAC Call Points (See related products)
- Enables the call point to be reset after alarm is activated
- Yellow indicator on plastic element indicates to user that the call point has been activated.
-
KAC Spare Call Point Glass, Pack of 5
KACKey Features
- This glass is suitable for use in the following type Call Points:
- KAC
- Apollo
- Morely
- Fulleon
- Ziton
- Notifier
- Electro Detectors
- EMS
- System Sensor
- Nittan
- Dimensions (HxWxD): 40mm x 71mm x 1.5mm
-
Kentec Addressable Matrix Mimic Panel For Syncro AS or Taktis
Kentec- Up to 504 LED’s can be controlled from any Taktis Fire or Syncro AS panel.
- Full colour printing.
- Available in a range of standard enclosures to suit any applications.
- Bespoke sized units can be made upon request.
- Choice of Red, Green or Yellow LED’s.
- Available with or without controls.