Uncategorised
Know what you're looking for?
Filter Products
Manufacturer
ACT Meters(4)
Advanced(32)
AES Global(7)
Aico(1)
Apollo(19)
BLE Lighting & Power(1)
Britania Fire(1)
Brittannia Fire(1)
C-Tec(24)
Channel Safety Systems(6)
Chrislec(2)
Click(1)
CQR(12)
Deedlock(1)
Dycon(2)
Eaton(8)
Electrium(1)
Electro Detectors(7)
EMS(15)
Evacuator(5)
FFE(30)
Fike(17)
Firechief(4)
Flamezorb(1)
Fulleon(2)
Gent(4)
Haes(4)
Hochiki(8)
Honeywell(2)
Howler(2)
Hoyles(1)
KAC(5)
Kenable(1)
Kentec(33)
Lube Tech(1)
Manufacturer(1)
Morley-IAS(12)
Safety Signs(1)
SDALS(1)
Specialized Security Products(1)
STI(3)
STP(3)
Synaps Technology(2)
TG Products(1)
The Fire Beam Company(10)
Vesda(7)
Vox Ignis(20)
Xtralis(6)
Zeta Alarms(38)
Ziton(3)
Type
Technology
Resolution
A Rating
Alarm In/Out
Anti-Fog
Audio In/Out
Auto Aligning
B Rating
Battery
Bluetooth Controller
Built-in Mic
Built-in Speaker
C Rating
Channels
Class A Holes
Class B Holes
Class C Holes
CO Testing
Codec
Colour
Detection Type
Device Type
Assist Call Cancel(1)
Sounder Strobe(1)
Direction
Environment
IR Range
Extinguisher Type
F Rating
Face Detection
Fast Fix Base
First Aid
Hazardous Applications
Head Removal
Heat Testing
Interconnectable
Lens
Lines
Low Level Controller
Marine Applications
Material
Max HDD Capacity
Max Loops
Maximum Record Resolution
Minimum Distance
Monitor Outputs
Networkable
Optical Zoom
Photoluminescent
Pipework Diameter
PoE Ports
Power
Protocol
Range
Reach
Relay
Remote Control Test
Self-Test
Series
Short Circuit Isolator
Sign Type
Size
Smoke Testing
Stimulus Type
System Type
Touchscreen
Wireless Interlink
Showing 301–350 of 374 results
-
Sigma Extinguishing Hold Off Unit with Green or Red Button
Kentec- Shrouded push button to prevent inadvertent operation.
- Activation resistor included.
- Compatible with all Sigma XT and Sigma XT+ models.
- Robust steel surface mount enclosure.
- Flush mount collar available.
-
Sigma SI Status Control Indicator
Kentec- Certified compliant with BS EN12094-1 when used with Sigma XT control equipment.
- High brightness LEDs.
- Detailed indication of the status of the control panel.
- Monitored data connection.
- Countdown timer shows time remaining until release.
- Manual only and Automatic & Manual mode select keyswitch option.
- Four wire connection (data and power).
- Protected dual action manual release switch option.
- Option for zonal fire and common fault indication with buzzer.
- Robust, high quality enclosure.
- Easy access to terminals.
- Remote Auto/Manual door interlock input (monitored).
- Remote Hold input (monitored).
- Internal fault diagnosis indicators.
- Weatherproof IP65 versions available.
- Internal buzzer.
-
Sigma XT Extinguishant Extract Key Switch
Kentec- Common ‘901’ keyswitch.
- Key trapped in operated position.
- Compatible with all Sigma XT and Sigma XT+ models.
- Robust steel surface mount enclosure.
- Flush mount collar available (part nmber M10FCLGT).
-
SigTEL Disable Refuge System Anti-Tamper Stainless Steel Enclosure
C-Tec- An attractive flush-mounting tamper-resistant cabinet for housing an ECU-4 or ECU-8 master controller
- Helps ensure controllers remain operational at all times by reducing the risk of vandalism
-
SigTEL Disable Refuge System Network Communication Card
C-Tec- An optional system expansion device
- Allows up to 14 ECU-4, 8, 16 or 8NT SigTEL controllers to be interlinked
- Allows systems of up to 224 lines (14 x ECU-16 controllers) to be easily set-up
- Any ECU-4, ECU-8 or ECU-16 can take control of the system at any time by the input of a special code
- Note that for networked systems that do not require multiple control points, controllers without handsets are available (ECU-8NT)
- IMPORTANT: To network a controller that has an optional ECU-224 desk controller fitted use an ECU723 interface/network card instead of an ECU722 (the ECU723 is due for release Nov 2019)
-
SigTEL Line Tester
C-Tec- Allows cable faults to be checked and cleared prior to equipment connection
- Includes all of the test cables and connectors you need
-
SigTEL Programming Configurator
C-Tec- Facilitates quick and easy editing of outstation/extension names via a Windows-compatible PC
- Includes a software CD, configurator and mini USB to master controller connection lead
-
SigTEL Weather Resistant Enclosure ForType B Outstations
C-Tec- An attractive IP66 rated enclosure designed for use with a SigTEL EVC302GF or EVC302F flush mounting disabled refuge controller.
- Includes a handle and mounting plate.
-
Simplicity Plus Addressable Fully Functional Repeater Panel
Zeta Alarms- Compatible with all Simplicity Plus Panels
- Certified to EN54 parts 2 & 4
- Sleek Metal Design
-
Single Prism Plate For Use With FFE Universal or Adjustment Bracket
FFE- Single prism plate for FFE prisms.
- For use the FFE Universal Bracket or Adjustment Bracket.
-
SmartCell 6V, 4Ah Sealed Lead Acid Battery for SmartCell Control Panel
EMS- Specifically designed for use with the SmartCell control panel
- 6V voltage and 4Ah capacity
- Ensures uninterrupted power supply for the control panel
-
SmartCell Call Point Breakable Tag, Pack of 50
EMS- Pack of 50 breakable tags for SmartCell wireless call points
- Designed to work seamlessly with SmartCell wireless systems
- Compact physical dimensions of 8 x 51.5 x 0.5 mm (W x H x D) for easy installation and use
-
SmartCell Call Point Key, Pack of 10
EMSEnter a brief description of your prod
- Pack of 10 call point keys for SmartCell wireless systems
- Designed to work seamlessly with SmartCell wireless call points
- Compact dimensions of 22 x 60 x 7 mm (W x H x D) for easy handling and storage
Low Stock
-
SmartCell Panel Communications Module
EMS- Provides remote connection option for SMS/email updates
- For internal connection within the SmartCell control panel
- Includes GSM antenna and SIM card
- Requires SC-94-0001-99 SmartCell remote services annual contract
-
SmartConnect Mulit-Loop RS232 Printer Module
Zeta Alarms- Designed to EN54 requirements
- Use to interface to RS232 devices
- 5V aux output (ofr use with panel printer only)
- Extensive front unit indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
-
SmartConnect Multi-Loop 6 Way Conventional Zone Monitor
Zeta Alarms- Designed to EN54 Part 2
- 6 x Conventional Zones
- Each zone is monitored for open & short circuit
- Extensive front unit status indications (see table below)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Each zone input can be configured as either Alarm or Technical Alarm
-
SmartConnect Multi-Loop Alarm Circuit Module
Zeta Alarms- Can be configured as an alarm output or a power output
- 2 x output circuit (500mA each)
- Extensive front unit status indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Power limited
-
SmartConnect Multi-Loop Card Module
Zeta Alarms- Designed to EN54 requirements
- Supports up to 250 addresses
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit status indications
- Time saving AUTO-LEARN facility
- 450mA max load (at 20 ohms loop resistance)
- Double address detection
-
SmartConnect Multi-Loop Gas Detection Module
Zeta Alarms- Each SCM-4-20 module has 2 available circuits
- Each circuit will allow a single connection of a 4-20mA device
- Extensive front unit status indications
- Compatible with any Smart Connect Multiloop Panel
- Quick Connect Din Rail Mount
-
SmartConnect Multi-Loop Multi-Input Module
Zeta Alarms- Designed to EN54 Part 2
- Each input is monitored for open & short circuits
- Extensive front unit status indications (See Datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
- Each input can be configured as either Alarm or Supervisory
-
SmartConnect Multi-Loop Multi-Relay Output Module
Zeta Alarms- Designed to EN54 Part 2
- 3 x Form C relay outputs
- Each relay can be programmed to activate on Alarm, Technical Alarm, or Fault.
- Extensive front unit indications (see datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
-
SmartConnect Multi-Loop Repeater
Zeta Alarms- 4.3” colour touch screen display
- 8032 event log entries
- Up to 64 panel peer-to-peer network
- 13 status LED indicators
- 5 function button controls
- Fully functioning repeater provides the ability to program a networked Smart Multi-loop control panel from the front screen
- Accommodates wiring lengths up to 1000 metres from the control panel for added design and install flexibility
- Network can we wired in either a bus or a ring topology if a redundant path is required
- 8 password protected access accounts available (1 admin level, 7 user level)
- Uncluttered and intuitive interface allows alarms, tech alarms, and fault events to be easily viewed
- Low power consumption
- Small enclosure
-
SmartConnect Multi-Loop RS485 Network Module
Zeta Alarms- Designed to EN54 requirements
- Peer-to-peer networking
- Comprehensive cross network cause & effects
- Remote programming over the network
- The network can be configured with either a ring or bus topology
- Extensive front unit status indications (See datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (Cable supplied with unit)
-
SmartConnect Multi-Loop TCP/IP Module
Zeta Alarms- Designed to EN54 requirements
- TCP-IP output via RJ45
- Zeta Remote monitoring via a desktop PC or smartphone via the cloud
- Remote control via the cloud
- Responsive web interface
- “Heartbeat LED” that shows communication between the module and the motherboard
- Extensive front unit indications
- Quick and simple to install
-
Sounder Active EOL For Advanced MxPro 5
Advanced- For use with EN54-13 Compliance.
- Supports device removal.
- For use with all MxPro 5 series control panels.
-
Spare Ceramic Tube for the Redlam Panic Bolt, Pack of 20
TG Products- Replacement ceramic tubes
- Ceramtubes™ are designed to produce no sharp edges when smashed
- Ceramtube™ Dimensions: L127mm x D17mm
- Available in packs of 20 or individually
-
Spare Controls Enable Key for Fike TwinflexPro & TwinflexPro 2 Panels, Single Key
Fike- Spare controls enabled key for Fike TwinflexPro & TwinflexPro2 panels.
- Sold individually.
-
Spare Fob/Card for APX19 Standalone Mifare Proximity Reader
CQREnter a brief description of your product here. This description will be displayed on product list pages.
-
Spare Glass for Eaton Fulleon CX Manual Call Point, Pack of 10
Eaton- Spare glass for CX manual call points.
- Sold in pack of 10.
-
Spare System Controller for Fireray 5000
FFE- Spare systems controller for the Fireray 5000 auto-aligning beam detector.
-
STI Integral Call Point Protective Cover
STI- Basic call point protection.
- Complies with BS5839-1:2017.
-
STI Stopper Service & Silence Pin
STIEnter a brief description of your product here. This description will be displayed on product list pages.
-
STP EM300ABP Armature Back Plate for Slim Maglocks
STP- Aluminium.
- 2 required for double maglocks.
- Surface mount.
- Used to avoid drilling through the door.
-
STP Z & L Bracket For Weatherproof Standard Maglock
STP- Z&L bracket to suit the extrenal STP-EXM12-24 magnet
-
Sycall Reset/Test Key – Set of 10
Synaps TechnologyEnter a brief description of your product here. This description will be displayed on product list pages.
-
SyCALL SY-FMP01 Flush Mounting Plate, Single or Pack of 10
Synaps Technology- Bezel to flush mount SyCALL manual call points.
- Sold in packs of 10.
- Sold Individually.
-
Taktis Vision EMS FireCell Network Repeater Panel
EMS- Robust, full colour, 7” 800 x 480 touch screen graphical display.
- Full indication of all information displayed at the fire control panel.
- Automatic display brightness adjustment.
- Silenceable internal sounder.
-
Low Stock
-
TwinflexPro Goody Bag
Fike- Replacement goody bag for TwinflexPro panels
- Contains spare fuses, battery connectors, etc.
- Compatable with 505-0002, 505-0004 & 505-0008
-
TwinflexPro2 505-0007 Conventional Expansion Card
Fike- Expand TwinflePro2 panel with 4 conventional zones.
- Compatible with Apollo, Hochiki, Nittan or System Sensor conventional detectors.
- Compatible with TwinflexPro2 4 zone panel only.
-
Universal Bracket For FFE Fireray 5000 Detector Head or Prism Plate
FFE- Universal bracket for Fireray 5000 detector head or prism plate.
- Bracket pivots for accurate alignment of beam detector and prisms.
-
Universal Ceiling Mount for Fireray 5000, 3000, Prism or Universal Bracket
FFE- Universal ceiling mount for the Fireray 5000, Fireray 3000, Fireray prism or Fireray universal bracket.
- Supplied with 2 x mounting plates and 1 x blank cover plate.
-
USB A to B Cable Lead, 5m in Black
Kenable- USB lead suiable for program,ming many fire panels.
- 5m in length.
-
VESDA High Level Interface HLI
Vesda- Direct access and monitoring of VESDAnet system
- Seamless data transfer from your VESDAnet to your PC
- Easily configured using Xtralis configuring and monitoring software packages
- Designed for small or large networks
- VHX-0210 includes modem support for remote notification & interrogation
-
Vesda VEA Sampling Points
Vesda- Two different types, standard and surface mount.
- Available in black or white.
- Full supervision.
- Automated cleaning by the detector.
-
Vesda Xtralis 9 Pin Serial Lead
VesdaEnter a brief description of your product here. This description will be displayed on product list pages. -
Vesda Xtralis Refrigerated Storage Sampling Kit
Vesda- Enables the ASD pipe to be installed, inspected and maintained outside the Refrigerated Storage facility hence enabling fire contractors to work in ambient conditions most of the time.
- Suited for facilities with and without ceiling cavities
- Eliminates the need for expensive HDPE (high density polyethylene) pipe inside the Refrigerated Storage facility
- Eliminates the need for costly access equipment hire for on-going service/maintenance
- Eliminates the need for heat tracing
- Less prone to blockage due to icing
- Provides a generally more robust ASD installation for these unique environments
- Provides considerably improved aesthetics
- Minimizes the need for “Back Flush” systems
- Offers all round cost savings