Shopping Basket

0 Items

Subtotal £0.00

Advanced MxPro 5 – 1 Loop Panel



The MxPro 5 series control panels are supplied with a single loop driver card, 2 onboard sounder circuits, 20 programmable zonal LEDs with slide-in labels, and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED
indication for confirmation of operation.

The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution, high contrast, graphical LCD display and tactile keypad providing a simple ‘select & click’ programming aid for engineer configuration and end user

Powerful cause-and-effect programming coupled with dynamic zoning, and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad, or PC-NeT Configuration Software.

An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels. The suite incorporates a number of different programmes which include configuration, service, logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.

Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel, remote terminal, or network peripheral, such as ipGateway™, BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.

Key Features

  • 20 programmable zonal / 25 System LEDs.
  • Apollo, Argus Vega, Hochiki & Nittan Evolution protocol support.
  • Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.
  • Dedicated USB & RS232 Serial Port for direct PC or modem connection.
  • Installer friendly Auto-learn, Loop Detection and On-board Scope facility.
  • Graphical display configurable for virtually any language.
  • Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.
  • Integral P-Bus for system expansion via available option cards.
  • Ad-NeT peer-to-peer network with up to 2000 zones.
  • Approved to BS EN54 part 2, 4 and 13.


How Can I Change The Company Logo On MXPro 5 Screen?

This can only be changed with the use of the PC-NET-007 logo software and programming lead.

When adding a 50 or 100 zonal expansion card to a 4 loop panel, will these be in addition to the 20 onboard LEDs?

Yes, this is in addition to the 20.

Similarly does the MxPro 5 network support multiple panels each with different protocols?

Yes, panels on the network can each support different protocols.

Is there a limit the number of short-circuit isolators you can fit onto a MxPro 5 loop?

There are no limits to the amount of isolators installed on a MxPro5 loop. In some cases isolators are in every device, however, we recommend that an isolator should be at least installed every 20 devices and at the start/end of the zonal boundaries of the system (a single fault should not affect more than 1 zone as per your local code of practice, i.e. BS-5839-1) .


  • Base Technology : Dual flash-based processors with real-time clock, trace diagnostics, programmable languages and character
  • Display : White backlit 240 x 64 graphical LCD
  • LED Indicators : 22 red (1 x Fire, 1 x More Alarms, 20 x Zonal Programmable), 1 green (Power), 13 amber and 12 bi-colour
    (Fault & System)
  • Controls : Alpha numeric keypad permitting navigation, Reset, Mute, Silence, Resound, Evacuate, and 4 x Programmable push buttons
  • Protocol :
    • Apollo (XP95 / Discovery)
    • Argus Vega
    • Hochiki ESP
    • Nittan Evolution
  • Number of Fire Zones : 2000 (200 per individual panel)
  • Number of Loops : 1
  • Devices Per Loop : Protocol dependent
  • Loop Current : 500mA
  • On-Board Sounder Circuits : x 1 Amp programmable
  • On-Board Relays : 2 x 1 Amp 30v AC/DC programmable(10mA, 5v min) – expandable to 4 using Mxp-507
  • Auxiliary Supply : 1 x 24v 500mA
  • Programmable Input : 1 x monitored programmable input on-board
  • Programmable Key Switch Inputs : 1 x volt free input (standard enc.), 8 x inputs (M, L, D enc.)
  • Total Available Output Current : 3A maximum available for loop current + sounder outputs + auxiliary supply
  • Mains Supply : 200 – 240v 47-63 Hz AC (+10%, -15% tolerance) 1.0A Max
  • Battery Capacity :
    • Standard Enclosure : 24v 4 Ah internal (min), 24v, 7 Ah internal (max)
    • Medium Enclousre (M) : 24v, 12Ah internal (max)
    • Large Enclosure (L) : 24v, 18Ah internal (max)
    • Deep Enclosure (D) : 24v, 45Ah
  • Charger Current : 1A temperature compensated
  • Serial Port : 1 x on-board RS232 connection for PC, modem, IP, or portable printer
  • USB Interface : 1 x USB B type connection for PC communication
  • Programming : On-board keypad or PC running Windows tools
  • Event Log : 5000 event & diagnostic + 500 fire
  • Networking : Optional plug-in network card (Mxp-503 – standard, or Mxp-509 – fault-tolerant)
  • Printer (optional) : On-board (M, L, D enclosures only)
  • Enclosure / Colour : Steel IP30 / RAL7035
  • Cable Entry (20mm knockouts) :
    • Standard Enclosure : 13 x top & 8 x rear
    • Medium Enclousre (M) : 17 x top & 11 x rear
    • Large Enclosure (L) : 19 x top & 11 x rear
    • Deep Enclosure (D) : 30 x top, 11 rear & 3 bottom
  • Size H x W x D mm :
    • Standard Enclosure : 340 x 340 x 85
    • Medium Enclousre (M) : 340 x 430 x 115
    • Large Enclosure (L) : 470 x 450 x 115
    • Deep Enclosure (D) : 470 x 450 x 190
  • Metalwork Options : Flushing bezel, battery box, utility enclosure, termination enclosure and rack mount
  • Approvals : EN 54-2:1998, EN 54-4:1998 & EN 54-13:2005


Additional information

Weight 10 kg

Apollo or Hochiki, Argus Vega, Nittan Evolution

Max Loops

Enclosure Size

Small, Medium, Large, Deep


, , ,

System Type


Related Products