Fire Alarm Detectors
- Point detection for conventional, twin-wire & addressable systems.
- Specialist solutions including aspiration, beam and flame detection.
Know what you're looking for?
Showing 151–200 of 310 results
-
GST DB-01D Common Conventional Detector Diode Base
GST- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
GST DC-9101E Conventional Combination Smoke & Heat Detector
GST- Combined optical smoke and A2R class heat detector.
- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9102E Conventional Photoelectric Smoke Detector
GST- Supports drift compensation to enable good environmental adaptability.
- Self-diagnostic.
- Local test activation with reed switch.
- Chamber contamination checking.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
-
GST DC-9103E Conventional Rate-of-Rise & Fixed Temperature Heat Detector
GST- Self-diagnostic.
- Local test activation with reed switch.
- All round LED visibility (360° viewing angle) avoids time spent on specific detector orientation.
- Configurable polling LED support.
- Remote indicator output.
- 3 Programmable operating levels (A1R, A2S and BS).
-
GST I-9105R Reflective Infrared Beam Smoke Detector
GST- Wide operating voltage range.
- Large protection areas.
- Combination of transmitter & receiver in one housing allows easy optical alignment.
- Intelligent microprocessor based decision making on fire and fault statuses.
- Easy one person installation & operation due to simple calibration and setup processes.
Low Stock
-
Hochiki ACD-EN ESP Multi Sensor With CO Detection (Ivory or White)
Hochiki- Low profile
- Heat , Optical and CO sensing elements
- CO Alarm (COHb) facility
- 10 year CO sensor life
- Programmable fire threshold level
-
Hochiki CDX Conventional Combined 60 Degree Heat Detector
Hochiki- Electronic Linear Heat Detection
- Remote Indicator Output
- Slimline Design
- Available in White
-
Hochiki Conventional 2 Wire Base In Ivory or White
Hochiki- Sav-Wire detector mounting base
- Available in Ivory or White
-
Hochiki Conventional Weatherproof 60 Degree Heat Detector in Ivory
Hochiki- Waterproof design - rated to IP67
- Low profile shape
- Utilises a bi-metallic strip to sense temperature change
- No mounting base required
- No standby current
- Approved by LPCB & VdS
-
Hochiki DCD-AE3M / DCD-CE3M Marine Approved Combined Heat Detector
Hochiki- Electronic linear heat detection
- Fixed 60°C and 90°C versions available
- Wide voltage range (9.5 ~ 30 V dc)
- Approved by LPCB
- Approved to MED by GL
- GL Type approval
-
Hochiki DIN Mounting Box Small or Large
Hochiki- Designed to house up to 6 Hochiki DIN Modules
- Quick-release screws
- Polyurethane gasket provides IP66 protection
- Corrosion free, resistant to most alkaline and acid
- Temperature resistance to +70 deg C, Impact resistant, and Non-flammable
- 32 knock-outs
- Supplied with DIN Rail and fixings
- IP66
-
Hochiki DRD-E Conventional Flame Detector
Hochiki- Class 1 performance as defined in BS EN54-10:2002 (range up to 25m).
- Single IR technology.
- Robust and slim design.
- Low current consumption.
- Easy to install.
- Fits any of the CDX Range of mounting bases.
- Twin LEDs for 360° view.
- Approved by LPCB & VdS.
-
Hochiki ESP Short Circuit Isolator Base in Ivory or White
Hochiki- Features integral SCI
- Compatable with Hochiki ESP sensors
- Available in Ivory or White
-
Hochiki FIRElink-100 2 Pipe Aspirating Smoke Detector with Docking Station
Hochiki- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Two sampling pipes up to 100 m (aggregate) in length (still air).
-
Hochiki FIRElink-25 1 Pipe Aspirating Smoke Detector with Docking Station
Hochiki- Ultra small, low cost aspirating smoke detector for easy and discreet installation.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Single sampling pipe up to 50 m in length (still air).
-
Hochiki FIRElink-400 4 Pipe Aspirating Smoke Detector
Hochiki- Volt-free Fire-1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.
- High sensitivity provided by laser based forward light scatter for reliable early warning.
- Four sampling pipes up to 200m (aggregate) in length (still air).
-
Hochiki Marine Conventional Photoelectric Smoke Detector
Hochiki- Removable, high performance chamber.
- Automatic Sensitivity Window Verification (ASWV) – drift compensation technology.
- Remote indicator output.
- Wide voltage range (12 ~ 30 V dc).
- Low profile design with one piece outer cover.
- Single fire LED - 360° viewing.
- Range of mounting bases.
- Approved by LPCB & DNV-GL.
-
Hochiki SLR-E3NM Marine Approved Photoelectric Smoke Detector
Hochiki- Removable, High Performance chamber
- Wide voltage range (9.5 ~ 30 V dc)
- One master base
- Approved to MED by GL
- Approved by LPCB
Low Stock
-
Hochiki SMB Adaptor Plate
Hochiki- Provides multiple fixing options for the CHQ module range
- Easy to install within the SMB-1 enclosure
- Pre-drilled with correct fixing holes
-
Hochiki SOC-E-IS Intrinsically Safe Conventional Smoke Sensor (Ivory or White)
Hochiki- Hochiki CDX intrinsically safe detector.
- Supported by a range of barriers .
- Suitable for installation in areas at Category 1 (inc all lower categories).
- Available in Ivory or White.
-
Hochiki SOC-E3N Conventional Photoelectric Smoke Sensor (Ivory or White)
Hochiki- Conventional Hochiki Photoelectric Smoke Sensor.
- Automatic Sensitivity Window Verification (ASWV) – Drift Compensation Technology.
- Easy to install.
- Backwards compatible with SLR range.
-
Hochiki YBN-R/6M Marine Approved Standard Base
Hochiki- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
Honeywell FS20X Dual IR & UV Flame Detector
Honeywell- Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions.
- Wide operating temperature range.
- Arc welding immunity.
- False alarm rejection.
-
Honeywell Replacement Filter Element for LF-AD Filter
HoneywellEnter a brief description of your product here. This description will be displayed on product list pages.
-
ICAM IAS / ILS Coarse Filter Replacement Filter Element, Pack of 10
ICAM by Xtralis- Replacement coarse filter for ICAM IAS or ILA units.
- Sold in packs of 10.
- Available in Black or White.
-
ICAM IAS / ILS Fine Filter Replacement Element, Pack of 10
ICAM by Xtralis- Replacement fine filter for ICAM IAS or ILA units.
- Sold in packs of 10.
-
ICAM IAS Single Or Dual Channel Air-Sampling Smoke Detector
ICAM by Xtralis- Single or Dual channel fire detection.
- Multiple configuration options.
- Multiple detection strategies.
- 100m (328 ft) per sampling pipe.
Low Stock
-
ICAM ILS Single Or Dual Channel Air-Sampling Smoke Detector
ICAM by Xtralis- Single or dual channel smoke detection.
- Laser air-sampling smoke detection.
- Up to 18 holes per channel (Class C).
- Multiple detection strategies.
- 100m (328 ft) per sampling pipe.
Low Stock
-
Intelligent Auto-Aligning Beam Detector
Apollo- Loop Powered and compatible with XP95, Discovery and CoreProtocol
- Incorporates a bi directional short-circuit isolator
- Automatic drift compensation
- Automatic reset
- Ground level Controller
- Automatic alignment compensation for building movement
- Laser assisted alignment for quick installation
- Allows for 2 detector heads per controller
- Up to 100m range
- Pre-alarm threshold
- EN 54-12 and EN 54-17 certified
-
Kidde Airsense – Dust Separator Cartridge
KiddeEnter a brief description of your product here. This description will be displayed on product list pages.
-
Kidde Airsense – Stratos-HSSD Dust Filter
Kidde- Stratos-HSSD Dust Filter Cartridge is for the Stratos-Standard HSSD Detector.
Low Stock
-
Kidde Airsense Dust Filter for Stratos-Quadra
KiddeEnter a brief description of your product here. This description will be displayed on product list pages.
-
Kidde Replacement Filter for HSSD2 and ModuLaser
Kidde- Compatible with both Modulaser and HSSD2.
- Additional sponge to improve functionality and usability.
-
M6 Nut (for fitting clip to end of threaded rod)
PlimatM6 Nut (for fitting clip to end of threaded rod)
-
M6 Rod adaptor (for fitting clip to side of rod)
PlimatM6 Rod adaptor (for fitting clip to side of rod)
-
M8 Nut (for fitting clip to the end of threaded rod)
PlimatM8 Nut (for fitting clip to the end of threaded rod)
-
M8 Rod adaptor (for fitting clip to side of rod)
PlimatM8 Rod adaptor (for fitting clip to side of rod)
-
Marine Mounting Base for Base Mounted Flame Detector
Apollo- Detector locking mechanism
- One way fit
- Contains an earth connector
- Easy to wire
- Contains no electrical parts
- Terminal for remote indicator
-
Marine Series 65 Mounted UV Flame Detector
ApolloThe Marine Series 65 Base Mounted UV Flame Detector is designed to protect internal areas where flaming fires might be expected, detecting UV radiation that is emitted by flames.
-
MBB-2 Hochiki Mounting Back Box with Glands (Ivory or White)
Hochiki- 4 cable entry holes suitable for cable glands (2 glands supplied).
- Colour matched to ivory or white detector range.
- Approved Sensor and Base range.
- Provides moisture and dust resistant fixing.
- Ideal for bulk-head fixing.
-
Morley IAS MI-FHSE-S2 Fixed Heat Detector 58C
Morley-IAS- Tri colour LED offering red, green and amber colour
- Rotary decade address switches 0 - 159
- Pure white colour to complement modern buildings
- 100% mechanical and electrical backwards compatibility
- New base design to complement the detector
-
Morley-IAS MI-PSE-S2 Intelligent Optical Smoke Detector
Morley-IAS- New mechanical platform with revolutionary chamber offering improved false alarm immunity.
- Tri colour LED offering red, green and amber colours.
- Pure white colour to compliment modern buildings.
-
Nittan EVC-DP Evolution Conventional Dual Optical Detector
Nittan- Dual Optical Detector Reduces False Alarms.
- Omniview 360° LED.
- Internal Alarm Current Limiting Resistor.
- Wide Operational Voltage Range (16v-32v).
-
Nittan EVC-IR Evolution Conventional Dual Band IR Flame Detector
Nittan- Dual band IR flame detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan EVC-P Evolution Conventional Optical Detector
Nittan- Optical smoken detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan Evolution Combined Optical Smoke & Heat Detector
Nittan- Optical Smoke and 54°C (A1R) Heat Sensors in one housing.
- Evolution FSK protocol.
- EEPROM Addressed (Programmer).
- RIL and Base Control Outputs.
-
Nittan Evolution Conventional Heat Detector
Nittan- 62°C or 92°C conventional heat detector from Nittan.
- Omniview 360° LED.
- Internal alarm current limiting resistor.
- Wide operational voltage range (12v-32v).
-
Nittan Evolution Detector Mounting Base
Nittan- Universal mounting base for Nittan Evolution range.
- Optional deeper version for surface cable.