Fire Alarm Detectors
- Point detection for conventional, twin-wire & addressable systems.
- Specialist solutions including aspiration, beam and flame detection.
Know what you're looking for?
Showing 251–300 of 310 results
-
Soteria SA5000-400 Heat Detector
Apollo- Soteria heat detectors with heat clasifications A1R, A2R, A2S, BR, BS, CR or CS.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
Soteria SA5000-600 Optical Smoke Detector
Apollo- Enhanced reliability of smoke detection.
- Reduction in false alarms.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
System Sensor 22051TE-26 Low Profile Addressable Multi-Sensor
System Sensor- System Sensor two sensor multi-criteria fire detector incorporating photoelectric and thermal sensing elements.
- New mechanical platform with revolutionary chamber.
-
System Sensor 52051 Low Profile Addressable Heat Sensor
System Sensor- Low profile System Sensor addressable heat detector.
- 58°C fixed temperature and rate of rise (Class A1R), 58°C fixed (Class A1S) and 78°C fixed (Class BS) available.
-
System Sensor B501AP Addressable Mounting Base
System Sensor- System Sensor addressble sensor base with SEMS screw connections and address identification label.
-
System Sensor Low Profile Addressable Optical Smoke Sensor
System Sensor- Low profile System Sensor optical smoke detector.
- Revolutionary chamber offering improved false alarm immunity.
-
The Blazer: Automatic Aspirating Maintenance System
Vesda- Reduces filter replacement
- Reduces the wear and tear of the ASD
- Stops the transport and lifting of vacuums and compressors
- Reduces call outs caused by flow faults
- Lowers the overall cost to maintain
-
The Fire Beam Xtra Auto-Aligning Beam Detector With Up To 160m Range
The Fire Beam Company- Auto-aligning reflective beam smoke detector.
- Up to 160m range.
- Motorised head unit.
- Controller unit (mounted at low level).
-
Zeta 30P Triple IR Flame Detector
Zeta Alarms- Suitable for non-hazardous areas
- Triple IR spectrum for longer distance detection & high false alarm immunity
- Typical applications include warehouses, waste disposal facilities & storage facilities
-
Zeta EX UV/IR or Triple IR (IR3) ATEX Approved Flame Detector
Zeta Alarms- Approved to ATEX by DNV for explosion-proof applications
- Choice of UV/IR or Triple IR spectrums
- Typical applications include offshore oil & gas, petrochemical & storage tanks
-
Vesda 855 In-line Filter Element, Sold in packs of 4
Vesda- Suitable for all Xtralis Aspirating Smoke Detectors.
- Improved detector longevity in applications with high levels of air-borne contamination.
- Reduces maintenance intervals, thus reducing total cost of ownership.
- Requires no additional pipe fi ttings thus reducing cost of installation.
- Improved aesthetics.
- Vertical or horizontal mounting.
- Compatible with metric (25mm OD) and imperial (1” OD) pipes eliminating the need for pipe adaptors.
-
Vesda Filter Cartridge
Vesda- Easy swap replacement filter.
- Fits VLC, VLF, VLP and VLS VESDA detectors.
- Available singly or in packs of 20.
- One model fits all detectors.
-
VESDA LCD Programmer
Vesda- User friendly menu system
- Supports multiple languages
- Single point access to entire VESDAnet system
- Alarm and fault simulation
- Shows wiring order
- Locates communications failures
- Password security
- Hand held or remote mounting
- Automatic Logoff when inactive
- Backlit LCD screen
-
VESDA VLC (LaserCOMPACT) Aspirating Smoke Detector
Vesda- Suitable for Zone 2 applications (VLC-EX only).
- Absolute smoke detection (coverage of 800 m2 or 8,000 sq. ft).
- Wide sensitivity range (0.005 - 20% obscuration/m and 0.0015 - 6% obscuration/ft).
- Single pipe inlet.
Low Stock
-
VESDA VLF (LaserFOCUS) Aspirating Smoke Detector
Vesda- Suitable for 250 or 500m2 coverage.
- Out-of-the-box installation and commissioning.
- Pre-engineered pipe network designs.
- Programmable alarm thresholds.
-
VESDA VLI Industrial Aspirating Smoke Detector
Vesda- VESDA VLI laster industrial aspiration unit.
- Suitable for Class 1 Division 2 applications - Groups A,B,C & D.
- Up to 2000 m2 (21,520 sq. ft.) coverage.
- Up to 4 inlet pipes.
-
VESDA VLP (LaserPLUS) Aspirating Smoke Detector
Vesda- Wide sensitivity range.
- Laser based smoke detection.
- 4 configurable alarm levels.
- High efficiency aspirator.
- Four inlet pipes.
Low Stock
-
Vesda Xtralis OSID Acrylic Test Filter – Pack of 10
XtralisEnter a brief description of your product here. This description will be displayed on product list pages.
-
Vesda Xtralis OSID Emitter Spare Alkaline Battery
XtralisEnter a brief description of your product here. This description will be displayed on product list pages.
-
Vesda Xtralis Power Supplies
Vesda- Available in three sizes: 0.5 A / 7Ah, 0.5A / 14 Ah and 2 A / 38 Ah
- Temperature compensated charging to maximize battery life
- Designed to blend in with Xtralis detectors
- Knockouts designed to line up with Xtralis detectors
- External LED indication on 220E and 250E
- Internal LED indication on 215E
- Relay outputs for connection to the general-purpose input for fault monitoring.
- 230 Vac only
-
Vesda Xtralis VSP-850 In-Line Filter
Xtralis- Suitable for all Xtralis Aspirating Smoke Detectors.
- Improved detector longevity in applications with high levels of air-borne contamination.
- Reduces maintenance intervals, thus reducing total cost of ownership.
- Requires no additional pipe fittings thus reducing cost of installation.
-
VESDA-E Filter Cartridge
Vesda- Easy swap replacement filter.
- Suitable for use with VESDA-E VEP, VEU detectors.
- Available singly or in packs of 20.
-
VESDA-E STX Power Supply Unit
Xtralis- Available in 0.5 or 2.0 amp sizes.
- Choice of matt block or silver finish.
- Designed to blend in with VESDA-E detectors.
- Knockouts designed to line up with VESDA-E detectors.
-
Vesda-E VEA Addressable Aspirating Smoke Detector
Vesda- Pinpoint addressability.
- 40 addressable microbore tubes with individual sampling points.
- Assured detection with end to end system integrity monitoring.
- Interruption-free business operation with centralised testing and maintenance.
- Single sampling point or single tube blockage detection at set intervals.
-
VESDA-E VEP Aspirating Smoke Detector
Vesda- One and four pipe models for different applications.
- Flair detection technology delivers reliable very early warning in a wide range of environments with minimal nuisance alarms.
- Multi stage filtration and optical protection with clean air barriers ensures lifetime detection performance.
- Four alarm levels and a wide sensitivity range deliver optimum protection for the widest range of applications.
-
VESDA-E VES Aspirating Smoke Detector
Xtralis- Sector addressability for up to four sectors.
- 40/80/100 samplig holes based on A/B/C sensitivity.
- Adaptive scan threshold.
-
VESDA-E VEU Highest Sensitivity Aspirating Smoke Detector
Vesda- Premium detector of the VESDA-E range.
- Flair detection technology delivers reliable very early warning in a wide range of environments with minimal nuisance alarms.
- Multi stage filtration and optical protection with clean air barriers ensures lifetime detection performance.
- Four alarm levels and an ultra wide sensitivity range deliver optimum protection for the widest range of applications.
-
Wagner Titanus Micro Sens With Optional Room Identification
Wagner- The primary alarm can be set to sensitivity levels as high as 0.1 % obs./m.
- This air sampling smoke detector’s 40 to 50m-long pipe system can have up to eight air sampling points (5 with ROOM·IDENT).
- The TITANUS MICRO·SENS® has a wide range of options, so it can be customised to any number of situations.
- A second detector module can be incorporated to create a dual detector dependency configuration.
- Special versions are available for deep-freeze facilities (temperatures as low as -40 °C) and noise-critical areas (to 23 dB (A)).
- The plug-and-play system makes the air sampling smoke detector quick and easy to install.
- Maintenance work can be performed without entering the protected area.
-
XP95 I.S. Optical Smoke Detector
ApolloKey Features
- Responds well to slow-burning, smouldering fires
- Well suited for bedrooms and escape routes
- Unaffected by wind or atmospheric pressure
-
XPERT 8 SA5000-200 Intelligent Mounting Base
Apollo- Compatibility with Soteria, Discovery and XP95 detectors.
- Isolated and Non-isolated devices supported.
- Isolated wiper - maintains loop connectivity during temporary removal of devices.
- Supplied with XPERT 8 Card for CoreProtocol®.
- ‘E-Z Fit’ allows for simple mounting of the detector base after wiring.
- Base mark allows for LED detector alignment.
-
Xtralis Imager Reset Station
Xtralis- Reset station for OSID Imagers.
- Red and Green LED signalling.
- Flush and surface mount solution.
-
Xtralis Light Shield for OSI-10
Xtralis- Prevents Imager saturation from bright light sources in one-on-one applications
- Protects Imagers against bright light outside of a 30° viewing angle in one-on-one applications
- Quick and easy installation
- Fits all OSID Imagers
-
Xtralis OSID Emitter
Xtralis- Patented dual wavelength, UV & IR, particle detection
- CMOS Imager with wide viewing angles
- Simple installation, commissioning and maintenance
- High tolerance to vibration and structural movement
- High tolerance to dust, fogging, steam, reflections and object intrusion
- High resistance to reflected sunlight
- On-board log memory
- Software tool for diagnostic purposes
- Aesthetically discreet and 3D coverage
- Long range up to 150 m. (492 ft.) with minimal free space (Ø15 cm./5.85”)
-
Xtralis OSID Emitter Environmental Housing
XtralisEnter a brief description of your product here. This description will be displayed on product list pages.
-
Xtralis OSID FTDI Cable 1.5m
XtralisEnter a brief description of your product here. This description will be displayed on product list pages.
-
Xtralis OSID Imager Environmental Housing
XtralisEnter a brief description of your product here. This description will be displayed on product list pages.
-
Xtralis OSID Laser Alignment Tool
XtralisEnter a brief description of your product here. This description will be displayed on product list pages.
-
Xtralis OSID Open-area Smoke Imaging Detector
Xtralis- No need for precise alignment
- Tolerant of alignment drift
- Automatic commisioning in under ten minutes
- Simple DIP switch configuration
- Dual wavelength LED-based smoke detection
- Simple and easy maintenance requirements
- Conventional alarm interface for straightforward fire system integration
- Three selectable alarm thresholds
-
Xtralis OSID Wire Guard
XtralisEnter a brief description of your product here. This description will be displayed on product list pages.
-
YBN-R/3 Hochiki ESP Sensor Mounting Base in Ivory, White or Black
Hochiki- Common mounting base for Hochiki ESP range of detectors
- Available in Ivory, White or Black
-
YBO-R/SCI Hochiki ESP Short Circuit Sounder Mounting Base in Red or White
Hochiki- Features short circuit isolator
- Designed for use with Hochiki ESP CHQ-WS2 and CHQ-WSB sounders
- Available in Red or White
-
Zeta Beam Xtra Motorised Reflective Optical Beam Smoke Detector
Zeta Alarms- Reflective beam smoke detector.
- Motorised head unit.
- Controller unit (mounted at low level).
- Designed to comply with EN54 part 2.
- Compatible with most major fire panels.
- Very low power consumption.
- Uses only 3mA at all times.