Fire Alarm Detectors
- Point detection for conventional, twin-wire & addressable systems.
- Specialist solutions including aspiration, beam and flame detection.
Know what you're looking for?
Showing 101–150 of 310 results
-
Fyreye MKII Addressable Detector Base
Zeta AlarmsThe MkII range of detectors can be mounted on 3 different bases, a shallow base (MKII-CB), a deep base (MKII-CB/D) and an isolator base (MKII-IB).
-
Cleaning Fluid for Aspirating Pipework
Plimat- Cleaning fluid suitable for all ASD pipwork.
- Sold in 500ml tin.
-
Compact Check Valve (Air Release) for 25mm ASD Pipework
Plimat- Prevent air from being sent backwards in ASD system.
- Suitable for 25mm pipework.
-
Cooper Fire 5 in 1 Multi Sensor (Selectable)
Eaton- Chamber monitoring and drift compensation dual LED
- ‘Self-Check’ facility
- 360° viewable LED design
- 5 modes in 1 detector
- Unobtrusive design
- Common mounting base
- Improved system integrity
-
Dust Filter for FIRElink 25 or 100 Aspiration Detectors
Hochiki- Compatible with FIRElink 25 and FIRElink 100 ASD units.
-
Eaton CAB300 Intelligent Addressable Standard Base
Eaton- First fix base.
- Loop integrity switch.
- Multiple cable entry points.
-
Eaton Conventional Enhanced Optical Smoke Detector
Eaton- LPCB 3rd party approved / CPD approved
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
- New enhanced detectors feature Dual LEDs
- 1 x Receiver - receives the beam of infrared light
- Drift compensation and Chamber monitoring (Optical & Photo-Thermal)
- Part Codes - MPD821, CPD321, FXN533
-
Eaton Conventional Heat Detector
Eaton- Rate of rise, fixed at 77°C or fixed at 92°C models available.
- 360° visibility LED using lightpipe technology.
- Aesthetically pleasing.
- Quick and simple to install.
-
Eaton Cooper CAH330 Addressable Heat Sensor
Eaton- Addressable heat sensor.
- Soft addressed.
- Integral short circuit isolator.
- Single address.
- Wide range of sensor types.
- 360° visibility LED using lightpipe technology.
- Drift compensation.
- Aesthetically pleasing.
- Quick and simple to install.
- Single “multi-mode” heat sensor.
- Wide viewing angle for increased LED visibility.
- Common mounting base.
- Positive “lock” indication.
- Discreet design for incorporation into any decor.
- Easy to maintain/service.
-
Eaton Cooper CAP320 Addressable Optical Sensor
Eaton- Addressable optical sensor.
- Soft addressed.
- Integral short circuit isolator.
- Single address.
- Wide range of sensor types.
- 360° visibility LED using lightpipe technology.
- Drift compensation.
- Aesthetically pleasing.
- Quick and simple to install.
- Single “multi-mode” heat sensor.
- Wide viewing angle for increased LED visibility.
- Common mounting base.
- Positive “lock” indication.
- Discreet design for incorporation into any decor.
- Easy to maintain/service.
-
Eaton Cooper CAPT340 Addressable Photo Thermal Dual Sensor
Eaton- Addressable photo thermal ‘Dual’ sensor.
- Soft addressed.
- Integral short circuit isolator.
- Single address.
- Wide range of sensor types.
- 360° visibility LED using lightpipe technology.
- Drift compensation.
- Aesthetically pleasing.
- Quick and simple to install.
- Single “multi-mode” heat sensor.
- Wide viewing angle for increased LED visibility.
- Common mounting base.
- Positive “lock” indication.
- Discreet design for incorporation into any decor.
- Easy to maintain/service.
-
ESP FIREbeam XTRA Analogue Addressable Beam Smoke Detector
Hochiki- 7-70 m standard detection range.
- Extensions kits available to enhance detection range up to 160m.
- Fully compatible with the Hochiki ESP analogue addressable protocol.
-
FAAST FLEX Aspirating Smoke Detector
Xtralis- Single & Dual channel variants with area coverage up to 1,600m2 (17,200 sq.ft) for single channel and 2,000m2 (21,527 sq.ft) for dual channel.
- Class A, B, C performance.
- An ultrasonic flow sensing element per chamber for accurate and reliable flow detection.
-
FAAST LT-200 Standalone Aspirating Smoke Detector
Honeywell- High sensitivity LED Detection Chamber specially designed to cover Class C.
- Single & Dual channel version available.
- Provides pre-alarm functionality for graduated alarm thresholds.
- A single device covers up to 2,000m2 according to national design regulations.
Low Stock
-
Twinflex ASD Multi-Function Detector With Optional Sounder And Strobe
Fike- Available as detector only, with sounder or with sounder/strobe
- 6 selectable modes of detection
- Inbuilt selectable end of line
-
Fike Sita ASD Detector Mounting Base, Pack of 5
Fike- Mounting bases for the Fike Sita ASD addressable detectors.
- Sold in packs of 5.
-
Firebeam BLUE Auto-Aligning Beam Detector 7-70m, Expandable Up To 160m Range
The Fire Beam Company- Connect to Your chosen beam
- Commission your beam
- Motorised head unit.
- Change the beams modes
- Maintain your beam
- Adjust and diagnose your beam
- Perform a fire test
-
Fireray 3000 End to End Infrared Optical Beam Smoke Detector
FFE- Allows for 2 detectors per system controller.
- Range 5 to 120 metres, configurable per set of detectors.
- Integral laser alignment in receiver.
- 2-wire interface between controller and receiver.
- Separate fire and fault relays per detector.
-
Fireray 3000 Exd Flameproof Optical Beam Smoke Detector
FFE- Separate transmitter and receiver unit certified to Exd.
- Allows for 2 detectors per system controller.
- Range 10 to 80 meters, (33ft to 262ft) configurable per set of detectors.
- Integral laser alignment in receiver.
-
Fireray 5000 Auto-Aligning Reflective Beam Smoke Detector With 50 or 100m Head
FFE- Allows for 2 x detectors per system controller.
- Each detector configurable from 8m to 100m.
- Separate fire and fault relays per detector.
- Integral laser alignment.
- Auto-align fast automatic beam alignment.
-
Fireray One Auto-Aligning Beam Detector
FFE- Integrated visible laser and auto-alignment for ultimate ease of alignment.
- Integrated user interface.
- Prevent nuisance alarms with Light Cancellation Technology™ which compensates for sunlight and artificial light sources.
- Building Movement Tracking™ continuously maintains alignment when buildings settle or flex due to temperature variations.
- Contamination Compensation to correct for gradual build-up of dust on optics.
- Clean detectors quickly and easily without affecting alignment.
- Low power consumption; can be powered from the loop.
- Prevent interference between beams with Dynamic Beam Phasing; install beams facing each other or in irregular configurations.
- Detection range of up to 120m.
-
Fyreye Addressable High Temperature Heat Detector
Zeta AlarmsThe FEAH2000 is an analogue addressable Heat detector that works to the Zeta Addressable protocol. The measuring circuit is based on a single precision thermistor, whose characteristics change according to temperature in a deï¬ned manner.
-
Fyreye Addressable Rate Of Rise Heat Detector
Zeta AlarmsThe FEAH2000 is an analogue addressable Heat detector that works to the Zeta Addressable protocol. Change in characteristics is converted to an analogue value, and sent digitally back to the ï¬re alarm control panel.
-
Fyreye Extra Analogue Addressable Optical Smoke Detector
Zeta Alarms- Addressable optical detector for Zeta MK1 legacy addressable systems
- Twin LEDs to improve alarm indication
-
Fyreye MKII 12V Auto Reset Relay Base
Zeta AlarmsEnter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye MKII Addressable Fixed Heat (CS90) Detector
Zeta Alarms- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
- 8 LEDs for improved, 360° visibility
- Compatible with all Fyreye MkII bases
- Addressed with dip switches or hand-held programmer
-
Fyreye MKII Combined Smoke and Heat Detector
Zeta Alarms- Conventional combined smoke & heat detector
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fixed Heat Detector
Zeta Alarms- Conventional fixed high-temperature heat detector
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Fyreye Fixed Heat (CS) Detector
Zeta Alarms- Designed to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
- Compatible with all Fyreye MkII bases
-
Fyreye MKII Conventional Optical Smoke Detector
Zeta Alarms- Conventional optical smoke detector
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
Fyreye MKII Conventional Rate of Rise and Fixed Heat Detector
Zeta Alarms- Conventional heat detector wirth Rate of Rise or Fixed Heat trigger @ 57 °C
- Compatable with most conventional systems
- Certified to EN54 standards
- 8 alarm indication LEDs
-
Fyreye Relay Base
Zeta AlarmsThe Relay base is mainly used on 12V security systems to signal detector operation to the panel. They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).
-
Fyreye Ultra-Violet Flame Detector
Zeta AlarmsThe detector is particularly suited in applications where flames can be expected to develop initially rather than smoke, due to the nature of the materials being protected. EG Camera film, computer/audio/video tapes/disks.
-
Gent ES Detect Conventional Heat Detector
Gent- Range of detection technologies with advanced microprocessor controlled detection
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life
- Compatible with diode base to monitor detector removal
-
Gent ES Detect Conventional Standard Base With or Without Diode
Gent- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
Gent ES Optical Smoke Conventional Detector
Gent- Optical smoke detector for early detection of fire.
- Self monitoring for contamination, to maintain optimum sensitivity throughout whole life.
- Compatible with diode base to monitor detector removal.
-
Gent S-Quad Addressable Detector With Optional Sounder
Gent- Heat, dual angle optical scatter and carbon monoxide (CO).
- Certified sensitivity settings that suit certain environments/applications.
- Short circuit Isolator in each device.
- Sound output synchronised and compatible with S-Quad range of EN54-23 VADs.