No
Know what you're looking for?
Filter Products
Showing 51–100 of 101 results
-
Fike Sita ASD Detector Mounting Base, Pack of 5
Fike- Mounting bases for the Fike Sita ASD addressable detectors.
- Sold in packs of 5.
-
Fyreye MKII 12V Auto Reset Relay Base
Zeta AlarmsEnter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye Relay Base
Zeta AlarmsThe Relay base is mainly used on 12V security systems to signal detector operation to the panel. They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).
-
Gent ES Detect Conventional Standard Base With or Without Diode
Gent- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
Gent Indoor Conventional Manual Call Point
Gent- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
-
Gent Weatherproof Conventional Manual Call Point
Gent- Fully compliant with EN54, Part 11.
- Glass operating element.
- Weather proof IP67.
- Supplied with surface mount back box.
-
GST DB-01D Common Conventional Detector Diode Base
GST- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
Hochiki CHQ-AB ESP Addressable Beacon
Hochiki- High Intensity LED technology
- Choice of Red, Amber or Blue lens colour
- Approved by VdS
-
Hochiki CHQ-CB Addressable Loop Powered Ceiling VAD
Hochiki- Ceiling mouted certified VAD.
- Loop powered.
- Choice of 2 LED colours (red or white).
- Choice of 3 case colours (white, ivory or red).
-
Hochiki CHQ-WB Addressable Loop Powered Wall Beacon VAD
Hochiki- Wall mouted certified VAD.
- Loop powered.
- Choice of 2 LED colours (red or white).
- Choice of 3 case colours (white, ivory or red).
-
Hochiki CHQ-WS2 ESP Addressable Wall Sounder in Red or White
Hochiki- Loop powered adderssabel Hochiki sounder
- 51 User-Selectable Tones
- Available in Red or White
-
Hochiki CHQ-WSB2 ESP Addressable Wall Sounder Beacon in Red or White
Hochiki- Single Loop Address - addressed via the TCH-B200 Hand Held Programmer.
- Variable Sound Output 90 ~ 102 dB(A) (±2 dB(A)) output at 1 metre.
- Sounder and Beacon can operated independently*1.
- ‘O’ Rated Beacon to EN54-23.
- Available with Red or White LEDs.
- Available with Red or White case.
- Weatherproof Kit available.
-
Hochiki Conventional 2 Wire Base In Ivory or White
Hochiki- Sav-Wire detector mounting base
- Available in Ivory or White
-
Hochiki ESP Addressable Manual Call Point in Yellow
Hochiki- Fast response
- Status LED
- Non-frangible element fitted as standard
- LCPB Approved
-
Hochiki Sav-Wire Manual Call Point
Hochiki- Designed for use on “Savwire” (two-wire) systems
- Approved to EN54-11:2001
- Terminals can accommodate up to a 2.5 mm² solid conductor
-
Hochiki YBN-R/6M Marine Approved Standard Base
Hochiki- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
Hochiki YBO-BS Addressable Base Sounder (Ivory or White)
Hochiki- Loop Powered with Single Loop Address
- Variable Sound Output 50 ~ 98 dB(A) (+/-2 dB(A)) output at 1 metre
- 51 User-Selectable Tones (all tones EN54-3 compatible)
-
Hochiki YBO-BSB2 ESP Addressable Base Sounder Beacon
Hochiki- Hochiki ESP combined base sounder & VAD beacon.
- Variable Sound Output 50 ~ 98 dB(A) output at 1 metre.
- 'O' Rated Beacon to EN54-23.
- Available with Red or White LEDs.
- Available with White or Ivory case.
-
KAC Conventional Indoor Manual Call Point
KAC- Unique ‘Plug & Play’ installation concept
- Total ‘Flex-Ability’ in the choice of operating element
-
Marine Mounting Base for Base Mounted Flame Detector
Apollo- Detector locking mechanism
- One way fit
- Contains an earth connector
- Easy to wire
- Contains no electrical parts
- Terminal for remote indicator
-
Maxitone Addressable Sounder Flasher
Zeta Alarms- High output
- 16 selectable alarm tones
- Volume control
- Backwards compatible with Zeta Standard Protocol (link)
-
Menvier Surface Manual Callpoint C/W Backbox Optional Weatherproof (CX201, MBG914, FX201)
EatonKey Features
- High visibility status LED
- Standard and weatherproof versions available
- Wide range of accessories
- Heavy duty terminals
- Quick and simple to install
- Fast fit clip on front cover
- Single tool for test and access
-
Morley-IAS Addressable Manual Call Point with Optional Short Circuit Isolator
Morley-IAS- Addressable manual call point for DX Connexion panel range.
- Optional built-in short circuit isolator.
-
Nittan Evolution Addressable Indoor Manual Call Point With Optional Short Circuit Isolator
Nittan- Resettable manual call point for Nittan Evolution protocol.
- IP24 rated housing, suitable for indoor applications.
- DIL switched addressed.
- Supplied with both surface backbox and flush mounting wall plate.
- Available with optional short circuit isolator.
-
Nittan Evolution Addressable Outdoor Manual Call Point With Optional Short Circuit Isolator
Nittan- Resettable manual call point for Nittan Evolution protocol.
- IP67 rated housing, suitable for outdoor applications.
- Backbox has knock-outs and M20 threads for easy fit of cable glands.
- DIL switched addressed.
- Available with optional short circuit isolator.
-
Nittan Evolution Detector Mounting Base
Nittan- Universal mounting base for Nittan Evolution range.
- Optional deeper version for surface cable.
-
Nittan Evolution EV-AV2 Addressable Sounder Beacon or Sounder Beacon Base
Nittan- Available as Standalone Sounder Beacon or Sounder Beacon Base.
- Evolution FSK Protocol.
- EEPROM Addressed (Programmer).
- 12 Tones DIP Switch Selected (3 Approved Tones).
-
Nittan Evolution EV-SDR Addressable Sounder or Sounder Base
Nittan- Available as Standalone Soudner or Sounder Base.
- Evolution FSK Protocol.
- EEPROM Addressed (Programmer).
- 12 Tones DIP Switch Selected (3 Approved Tones).
- Replaces EV-ABS Sounder.
-
Nittan Evolution High Output Sounder, Beacon or Combined
Nittan- Available as Sounder, Beacon (VAD) or Combined.
- IP65 rated.
- Evolution FSK Protocol.
- EEPROM Addressed (Programmer).
-
Nittan UB-4 Standard Detector Base
Nittan- Nittan 4 Terminal Standard Detector Base.
- Low Profile Detector Base.
-
Orbis Intrinsically Safe (IS) TimeSaver Base
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
-
Orbis Marine Relay Base
ApolloThe Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state
-
Orbis Marine TimeSaver Base
ApolloThe Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.
-
Orbis TimeSaver Base with Continuity Switch
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Product Depth - 20mm
- Product Diameter - 100mm
-
System Sensor Addressable Indoor Manual Call Point
System Sensor- Addressable System Sensor MCP
- Suitable for indoor applications
- Resettable element
- No short-circuit isolator
-
System Sensor B501AP Addressable Mounting Base
System Sensor- System Sensor addressble sensor base with SEMS screw connections and address identification label.
-
System Sensor BSO-PP-N00 & I00 Addressable Base Sounder with Optional Isolator
System Sensor- Addressable base sounder for System Sensor protocol.
- Available with optional short-circuit isolator.
-
System Sensor DSS-PC-N00 & I00 Addressable Base Sounder & VAD with Optional Isolator
System Sensor- High output LED technology ensures optimum light output and low power requirements.
- High efficiency piezo disk and horn profile generate powerful sound output.
- Features Advanced protocol controllable sound output, tone selection, group polling, independent sound or strobe function
- Automatic synchronization of sounder and strobe
- Large cable access
- Rear or surface cable entry
- Loop continuity spring
- Simple twist fit onto universal B501AP base (positive “poke yoke” engagement)
- Anti-tamper feature
- In-built isolation options
- Address tag for clear indication
- Single point of installation – saves time, cost & inventory
- Low current draw enables more devices on loop
- Adjustable volume control (on device or from panel)
- Rotary wheels for clear address indication
- Clear lens with red flash
-
XP95 Category W EN 54-23 Visual Alarm Device with Red or White Body
Apollo- Uses high intensity LED (white flash only).
- EN 54-23 Compliant Category W. VAD.
- Coverage W-2.4-6.
- Automatic LED check when VAD activated.
-
XPERT 8 SA5000-200 Intelligent Mounting Base
Apollo- Compatibility with Soteria, Discovery and XP95 detectors.
- Isolated and Non-isolated devices supported.
- Isolated wiper - maintains loop connectivity during temporary removal of devices.
- Supplied with XPERT 8 Card for CoreProtocol®.
- ‘E-Z Fit’ allows for simple mounting of the detector base after wiring.
- Base mark allows for LED detector alignment.
-
YBN-R/3 Hochiki ESP Sensor Mounting Base in Ivory, White or Black
Hochiki- Common mounting base for Hochiki ESP range of detectors
- Available in Ivory, White or Black
-
Zeta CP3 Conventional Manual Call Point
Zeta Alarms- EN54-11 approved conventional manual call point
- Surface mounted (includes back box) or flush mounted with optional bezel
- Positive activation that mimics the feel of breaking glass
- Simple key to reset operating element - no broken glass
Low Stock
-
Zeta CP4 Conventional Surface or Flush Manual Call Point
Zeta Alarms- EN54-11 approved.
- Very high visibility of the alarm condition.
- New efficient and reliable mechanism.
- High impact resistant ABS glass fiber material Fully patented.
- Quick and Easy Installation.
-
Ziton Addressable Base Sounder in Polar White
Ziton- Detector and sounder from a single wiring point – minimising installation costs
- Powered directly from the ZP loop
- Up to 60 detectors with sounders directly on the loop
- Separate addresses selectable for detector and sounder
- High efficiency sound gun transducer
- Compatible with all ZP loop devices
- Laser alignment aid in the receiver head
- Wide range of international sound types and frequencies
- EN54:3 approved and CPR certified
-
Ziton SPB-2 Addressable Sounder Base in Red or White
Ziton- Pluggable base for ZP755 sounder.
- First fix facility.
- Ease of installation.
- Large wiring terminals.
-
Ziton SPB-2P Plugable Base for ZP755 Sounder in White
Ziton- Ease of installation
- First fix facility
- Large wiring terinals
-
Ziton ZP7 Weatherproof Addressable Manual Call Point
Ziton- IP67 rating for outdoor applications
- Resettable or frangible operating elements
- Single maintenance tool
- Plug in loop connection
-
Ziton ZP7-SB1-P Standard Base for ZP7 Detectors
Ziton- Common to all ZP7 series detectors.
- Automatic locking option.
- Address identification label.
- Easy to install.
-
Ziton ZP755HA-2 Addressable Horn Sounder in Red or White
Ziton- Wide 'all around' sound distribution.
- Microphone self test facility.
- Plug in base – no direct wiring connections.
- Up to 50 sounders directly on the loop wiring.