No
Know what you're looking for?
Showing 201–250 of 272 results
-
Nittan Evolution DIN Rail Mounting Circuit Isolator
Nittan- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
-
Nittan Evolution Dual Optical With Heat Detector
Nittan- Dual Optical Technology Plus Heat Sensor Reduces False Alarms.
- Evolution FSK protocol.
- EEPROM Addressed (Programmer).
- RIL and Base Control Outputs.
-
Nittan Evolution EV-AV2 Addressable Sounder Beacon or Sounder Beacon Base
Nittan- Available as Standalone Sounder Beacon or Sounder Beacon Base.
- Evolution FSK Protocol.
- EEPROM Addressed (Programmer).
- 12 Tones DIP Switch Selected (3 Approved Tones).
-
Nittan Evolution EV-DP Dual Optical Detector
Nittan- Dual Optical Technology reduces false alarms.
- Evolution FSK protocol.
- EEPROM Addressed (Programmer).
- RIL and Base Control Outputs.
-
-
Nittan Evolution EV-SDR Addressable Sounder or Sounder Base
Nittan- Available as Standalone Soudner or Sounder Base.
- Evolution FSK Protocol.
- EEPROM Addressed (Programmer).
- 12 Tones DIP Switch Selected (3 Approved Tones).
- Replaces EV-ABS Sounder.
-
Nittan Evolution Heat Detector
Nittan- Option Of A1R (54°C) or CS (92°C) Classification Heat Detector.
- Evolution FSK protocol.
- EEPROM Addressed (Programmer).
- RIL and Base Control Outputs.
-
Nittan Evolution High Output Sounder, Beacon or Combined
Nittan- Available as Sounder, Beacon (VAD) or Combined.
- IP65 rated.
- Evolution FSK Protocol.
- EEPROM Addressed (Programmer).
-
Nittan Evolution Optical Detector With Optional Built In Sounder
Nittan- Optical Detector.
- Version With
- Evolution FSK protocol.
- EEPROM Addressed (Programmer).
- RIL and Base Control Outputs.
-
Nittan Sensortec Addressable Optical Detector
Nittan- Optical smoke detector for Nittan Sensortec systems.
- Latest generation Nittan optical chamber.
- Omniview 360° LED.
- Robust fully modulated AS communications protocol.
-
Nittan UB-4 Standard Detector Base
Nittan- Nittan 4 Terminal Standard Detector Base.
- Low Profile Detector Base.
-
Notifier NFXI-OPT Opal Addressable Smoke Detector
Notifier- Built in short circuit isolation.
- New advanced Opal protocol allows mapping of the loop for precise fault location using isolators.
- Tri colour LED offering red, green and amber colours.
- Rotary decade address switches.
-
Orbis A1R Heat Detector
Apollo- TimeSaver Base designed for fast installation
- StartUp for fast commissioning
- FasTest reduces maintenance time
- Automatic drift compensation, with DirtAlert warning to easily identify dirty detectors
- Can be used for applications where smoke detectors are unsuitable
- Ideal in environments that are dirty or smoky under normal conditions
- Red flashing LED at StartUp confirms the device is operating
- SensAlert®, yellow flashing LED indicates faulty operation
- FasTest® takes just four seconds to test and confirm detectors are functioning correctly
- multisensor smoke detector for detecting fast-burning fires
- flashing LED option
- Warranty: 10 year
-
Orbis Marine BR Heat Detector with Flashing LED
Apollo- Approved for use in marine environments
- Modern, low-profile design
- TimeSaver® Base for fast installation
- Transient rejection for false alarm reduction
- High humidity tolerance at up to 98% RH
- Wide operating temperature -40°C to +70°C
-
Orbis Marine Heat Detector
ApolloThe Orbis Marine Heat Detector uses a single thermistor to sense the temperature around the detector. We have 6 detectors available from the Orbis Marine range designed to suit a variety of operating conditions.
-
Orbis Marine Multisensor Detector
Apollo- Approved for use in marine environments
- Transient rejection for false alarm reduction
- Modern, low-profile design
- Responds well to fast-burning, flaming fires
- Good performance in both black and white smoke
- DirtAlert, warns service engineers via a flashing yellow LED that detectors need maintenance
- FasTest - a maintenance procedure that takes just four seconds to test detectors
- SensAlert - a yellow flashing LED indicates faulty operation
- High humidity tolerance at up to 90% RH
- Wider operating temperature -40°C to +70°C
-
Orbis Marine Optical Smoke Detector
Apollo- Approved for use in marine environments
- Transient rejection for false alarm reduction
- Modern, low-profile design
- Responds well to slow-burning fires
- Good performance in both black and white smoke
- DirtAlert - warns service engineers via a flashing yellow LED that detectors need maintenance
- FasTest - a maintenance procedure that takes just four seconds to test detectors
- SensAlert - a yellow flashing LED indicates faulty operation
- High humidity tolerance at up to 90% RH
- Wide operating temperature -40°C to +70°C
-
Orbis Marine Relay Base
ApolloThe Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state
-
Orbis Marine TimeSaver Base
ApolloThe Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.
-
Orbis Multisensor Detector
Apollo- Orbis conventional multisensor smoke detector.
- TimeSaver Base designed for fast installation.
- StartUp for fast commissioning.
- FasTest reduces maintenance time.
- Automatic drift compensation, with DirtAlert warning to easily identify dirty detectors.
-
Orbis TimeSaver Base with Continuity Switch
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Product Depth - 20mm
- Product Diameter - 100mm
-
Roshni Low Profile (RoLP) Conventional Fire Alarm Sounder
Fulleon- 102dB(A) sound output
- 32 tones (user selectable)
- Optional deep base
- Two stage alarm
- Automatic synchronisation
-
Rotary Fire Alarm Bell
Moyne RobertsRotary Fire Alarm Bell
With a tried and tested robust design, this hand operated fire bell is suitable for use in hazardous locations or areas without a power supply. The bell has a pre-drilled flange for easy fitting, an aluminium base plate and red dome.
- Suitable for internal and external use
- Sound output: 60dB at up to 35m
- Quick and simple to install
-
-
Sita ASD Addressable Multipoint Detector With Optional Sounder And Strobe
Fike- Multi-mode detector offering 6 detection modes.
- Available with integral sounder and strobe.
- Compatiable with all Fike addressable panels including the CIE-A-200.
-
Solista LX – Wall Fire Visual Alarm Device (VAD)
Eaton- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Solista LX Conventional Ceiling Mounted VAD
Eaton- Conforms with EN 54-23 (meets the required illumination 0.4lux/m2 over entire room area).
- LED technology for long service life and low current consumption, maximising the number of devices on your alarm circuit.
- Unique optics for light management, with lens design that optimises light dispersal, minimising power wastage.
- Up to 7.5m coverage volume which reduces the number of devices required to cover an area.
- Coverage switch feature - For smaller areas switch down from 7.5m to 5m, reducing power consumption by up to 50%.
- Wide input voltage range leads to flexibility in system design.
- Flash rate switch feature - Reduce from 1Hz to 0.5Hz setting, reducing power consumption by up to 50%.
- Soft start up means no current peak at start up, thus reducing circuit loading.
- New connection layout creates easier wiring and connection on installation.
- Locking Bases to prevent easy removal of device.
-
Sonos Conventional Sounder & LED Beacon
Klaxon- Low current LED beacon.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65 (deep base units).
- Choice of lens colours.
- Sounder and beacon can be controlled separately.
- Tone and volume can be preset or adjusted off-base - 20dB.
- Separate connections for sounder & beacon.
-
Sonos Conventional Sounder in Red or White
Klaxon- Wide voltage range.
- Simple ‘First Fix’ installation.
- 32 tones.
- Tone and volume can be preset or adjusted off-base.
- Weatherproof to IP65 (deep base units).
- Synchronised alarm tones.
- Volume control - 20dB.
-
Sonos High Power 5J Xenon Beacon
Klaxon- High output 5J xenon beacon.
- 10-60V DC or 110/230V AC.
- Simple ‘First Fix’ installation.
- Weatherproof to IP65.
- Synchronised flash (DC version).
- Single/double flash (DC version).
- No surge current.
-
Sonos LED Beacon
Klaxon- High efficiency LED beacon consumes less than 5mA.
- Simple ‘First Fix’ installation (no second fix wiring).
- Weatherproof to IP65 (deep base units).
- Synchronised flash.
-
Sonos Open Area Beacon with Isolator
Apollo- For use with XP95 & Discovery systems
- Self-test fault monitoring
- IP65 rated
- Individual and group addressing
- Sycronisation of flashes
- Comes with Isolating Base as standard
- Loop-powered
- Red and clear lens options
-
Sonos Pulse Ceiling Mounted EN Certified VAD Beacon With Optional Sounder
Klaxon- Ceiling mounted Visual Alarm Device
- Conforms to EN54-23
- White or Red flash versions available
- Available with optional Sounder
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD
Klaxon- EN54-23 VAD
- White or Red flash versions available
- Synchronised Flash
-
Sonos Pulse Wall Mounted VAD Beacon with Sounder
Klaxon- EN54-23 VAD
- White or Red flash versions available
- Includes integral sounder
-
Soteria SA5000-400 Heat Detector
Apollo- Soteria heat detectors with heat clasifications A1R, A2R, A2S, BR, BS, CR or CS.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
Soteria SA5000-600 Optical Smoke Detector
Apollo- Enhanced reliability of smoke detection.
- Reduction in false alarms.
- Simple installation with a new easy-fit base and an isolator located in the head.
- PureLight® technology.
- A sleek and stylish low-profile or flush design.
- Compatible with XP95 & Discovery protocols.
- Comprehensively tested to exceed EN54 standards.
- Extensively tested at Apollo’s state of the art in-house testing facilities.
-
StroBell Combined Fire Alarm Bell With White LED Beacon
Vimpex- Utilises market-leading bell design
- Ultra bright strobe in clear lens for maximum light output
- Familiar installation method
- Low current consumption
- Single point of installation minimises wiring andassociated costs
- Strobe synchronisation with no additional wiring (synchronisation not covered by approval
- Can be wired as a two stage alarm, with both bell and visual alarm on separate circuits (not approved in this configuration)
-
System Sensor 22051TE-26 Low Profile Addressable Multi-Sensor
System Sensor- System Sensor two sensor multi-criteria fire detector incorporating photoelectric and thermal sensing elements.
- New mechanical platform with revolutionary chamber.
-
System Sensor 52051 Low Profile Addressable Heat Sensor
System Sensor- Low profile System Sensor addressable heat detector.
- 58°C fixed temperature and rate of rise (Class A1R), 58°C fixed (Class A1S) and 78°C fixed (Class BS) available.
-
System Sensor Addressable Indoor Manual Call Point
System Sensor- Addressable System Sensor MCP
- Suitable for indoor applications
- Resettable element
- No short-circuit isolator
-
System Sensor Addressable Mounting Base with Isolator
System Sensor- Low profile (26mm)
- Low Current consumption (100 µA)
- Up to 99 isolators per loop
-
System Sensor B501AP Addressable Mounting Base
System Sensor- System Sensor addressble sensor base with SEMS screw connections and address identification label.
-
System Sensor BSO-PP-N00 & I00 Addressable Base Sounder with Optional Isolator
System Sensor- Addressable base sounder for System Sensor protocol.
- Available with optional short-circuit isolator.
-
System Sensor DSS-PC-N00 & I00 Addressable Base Sounder & VAD with Optional Isolator
System Sensor- High output LED technology ensures optimum light output and low power requirements.
- High efficiency piezo disk and horn profile generate powerful sound output.
- Features Advanced protocol controllable sound output, tone selection, group polling, independent sound or strobe function
- Automatic synchronization of sounder and strobe
- Large cable access
- Rear or surface cable entry
- Loop continuity spring
- Simple twist fit onto universal B501AP base (positive “poke yoke” engagement)
- Anti-tamper feature
- In-built isolation options
- Address tag for clear indication
- Single point of installation – saves time, cost & inventory
- Low current draw enables more devices on loop
- Adjustable volume control (on device or from panel)
- Rotary wheels for clear address indication
- Clear lens with red flash
-
System Sensor Low Profile Addressable Optical Smoke Sensor
System Sensor- Low profile System Sensor optical smoke detector.
- Revolutionary chamber offering improved false alarm immunity.
-
The Fire Beam Xtra Auto-Aligning Beam Detector With Up To 160m Range
The Fire Beam Company- Auto-aligning reflective beam smoke detector.
- Up to 160m range.
- Motorised head unit.
- Controller unit (mounted at low level).
-
Vimpex Identifire IDBTS Base Sounder with Cover
VimpexKey Features
- 32 Tones
- EN 54-3 tested and fully approved in accordance with CPR
- Slimmest profile in the industry
- Low current consumption
- Omni-directional sound
- Front plate for stand-alone use available
- Four selectable volume levels
- Installer friendly terminals
- Ceiling or wall mounting
- Robust and easily connected ‘two in two out’ 2.5mm terminals
-
VXB & VTB Conventional Visual Alarm Device with Optional Sounder
Cranford Controls- Approved to EN54-3(Sounder) and EN54-23(VAD Beacon).
- White flash(C-2.4-8), red flash (C-2.4-7) options available.
- 32 selectable tones.
- Body colour options available – red or white.
- Deep base variants independently certified to IP65.
-
XP95 Category W EN 54-23 Visual Alarm Device with Red or White Body
Apollo- Uses high intensity LED (white flash only).
- EN 54-23 Compliant Category W. VAD.
- Coverage W-2.4-6.
- Automatic LED check when VAD activated.